RetroPie 4.3.17 Stretch images
-
Since Stretch is a stable Raspbian build, will updating this test setup be equal to having a final release once it's released or will there be some radical changes that cannot be updated via RP?
-
@matchaman yes. Can update.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
Seems to be an issue installing PS3 clone drivers also. Previously when you went to manage packages > drivers > ps3 & installed them, you could then "remove current configurations" which would uninstall the genuine ps3 controller drivers and allow you to install the shanwan clones, which would then work every time. (Have done this many times and easy to replicate)
Now after you install the ps3 drivers, if you go to remove configuration it uninstalls the whole ps3 driver selection option. (Have tried multiple times)
So basically, you can only install the clone drivers over the top of the original ps3 drivers which prevents the controllers connecting.
-
Is it possible to add the SkyScraper from @muldjord into future versions of RetroPie. There is a constant development of this tool since the last 9 month ... so there is a fair chance of future development. Maybe as optional package into the RetroPie-Setup?
-
Just adding something I have struggled with
Has anyone compiled lr-mame?I updated swap to 1024 and attempted.
Getting this error,
{standard input}: Assembler messages:
{standard input}:228156: Warning: end of file not at end of a line; newline inserted
{standard input}:228274: Error: bad arguments to instruction --mov r0' {standard input}:228107: Error: can't resolve.LC830' {UND section} - `.LPIC8427' {UND section}
g++: internal compiler error: Killed (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-6/README.Bugs> for instructions.
bfm.make:739: recipe for target '../../../../libretro/obj/libretro/src/mame/drivers/bfm_sc4.o' failed
make[2]: *** [../../../../libretro/obj/libretro/src/mame/drivers/bfm_sc4.o] Error 4
Makefile:127: recipe for target 'bfm' failed
make[1]: *** [bfm] Error 2
make[1]: *** Waiting for unfinished jobs....
Compiling src/mame/machine/mpu4.cpp...
Archiving libbarcrest.a...
makefile:1288: recipe for target 'linux' failed
make: *** [linux] Error 2
Removing additional swap
/home/pi/RetroPie-Setup
Could not successfully build lr-mame - MAME emulator - MAME (current) port for libretro (/home/pi/RetroPie-Setup/tmp/build/lr-mame/mamearcade_libretro.so not found).Log ended at: Mon 2 Apr 01:00:01 UTC 2018
Total running time: 4 hours, 31 mins, 38 secs -
@auswear I also have issues on Stretch with Shanwan controllers.
My solution is to use the new sixad drivers that are in a pull request on RetroPie-Setup github. But it always says PageTimeout and it takes like 2-3 times to initially pair them- but then it works great.
-
Oops, 4.14.30 kernel from last update seems to have broken some things, including dualshock 3 drivers...
edit : obviously not talking about the necessary remap, I had tons of ghost input, and the motion sensors are detected as a joystick. -
@sano In my case I have problems with the xpad-driver after the update:
https://retropie.org.uk/forum/topic/17119/input-problems-with-kernel-4-14
-
@steeeb How do you install them?
-
@sano +1 been noticing this as well. Took 2 clean installs to finally get one of my pads to pair. Lots of ghost input, and I can only pair 1 of 3 of my controllers.
-
@Twitch0815
If you're somewhat familiar with git, @psyke83 version of sixaxis works great for me with 4.14.30 :
https://retropie.org.uk/forum/topic/15967/sony-dualshock-3-call-for-testers-sixaxis-script-module -
@sano Not sure this has been mentioned yet, but you can install this image directly onto a usb drive and run it on a pi 3B+. Not sure if this creates any issues, as I haven't hooked up a physical KB to it yet, but it boots up to the configure controllers part of ES...
edit for clarity: as in, no sdcard is needed if you boot with the usb drive.
-
I'm having some difficulty with lr-prdoom. It works mostly fine and goes in game, but for some reason, my weapon is constantly being swapped out, even when I remap those controls.
-
@gomisensei what size of USB did you use?
Makes me wonder if its possible to have a small as hell sd card for boot only, with the USB having all the retropie and kernal data
-
4.3.17 images are now on the first post.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@buzz thanks. What are the high level changes between 15 and 17?
-
@pjft you would need to check GitHub history sorry. Not at home.
-
This has probably already been answered so apologies in advance but -
Can I put 4.3.17 on my 3B as well or is this a 3B+ only build?
-
@classicgmr You can put this on your 3B.
https://drive.google.com/open?id=1ZV-PzX1VBSKqtqAxWl5FE6wh5PRaohxU
-
Hey guys, Im fairly new to the pie scene. Just bought myself a pi3 Bplus, i was just wondering if wifi is able to work or can I plug it into a router to transfer my games?Edit: Just read the post regarding wifi, gonna try that to see if it worksThanks,
Duck
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.