mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support

grant2258

@hhromic said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

@grant2258 said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

@hhromic the thing is mame simultaneous mode with game focus mode on is the same as the old keyboard only difference is you can use your original joypads as well.

the ipac will only send keycode because game focus mode turns all retroarch bindings off including retropads. Hope this clears things up

Sounds good. I agree that "retroarch + game focus = mame only".
But, what about the case of people who want the "old keyboard" without the hassle of having to enter game focus mode every time?

That's the use case I can see where having a "mame only" mode along the other ones is handy. I think is also less confusing to clearly have these three modes (retroarch-only, mame-only or simultaneous). Users will know clearly what each mode does and use what is best for them.

We could do that I have no issues with adding keyboard only the average user is not going to understand the difference though and wonder why his/her controllers no longer work.

The good thing is you understand whats going on its a relief to be honest. As for mame mode there really is no choice but to use game focus mode if you have any keys bound to a retropad which you will if your using an ipac. This is how you would use mame2003 with an ipac without any issues assuming you mame keys are set right

just to clarify the 3 modes you are presenting.

retroarch - only send retropad bind to mame mask out the keypress because of retropad bind in ra config

keyboard - only send keyboard binds mask out all retropad binds only keys work

mame - send both (you will need to use game focus mode for this if you have any keys bound to a retropad in your ra config)

mame == simultaneous mode in the old scheme

edit: have put a pull request in for the 3 modes if its accepted consider it done :). I dropped down from a collaborator to a contributor on mame2003+ so i did not have to deal with people saying I was making the choices for myself. It makes my life easier for me not dealing with the politics

hhromic

@grant2258 I just tried your patch now, finally found some time.
It's working great now for me with mode retroarch, no double-inputs and I can map the keys from RetroArch, including hotkeys, and map per-game also using RA's system of cfg files. As I don't have any advanced controllers (just sticks with buttons), this approach is very convenient. Much appreciated.

Regarding the modes you mention, yes that is what I was talking about (retroarch, keyboard, mame modes). I think is the most flexible approach to suit every kind of users from average to advanced.

I understand one mode can be "emulated" using game focus, thus not strictly "necessary", however sometimes the game focus key is not easily accesible. For example I don't have extra buttons in my controller and I can't change the hardware mappings. In this case I would need an additional keyboard just to enter the game focus mode. With the retroarch mode none of this is necessary for such simple controller :). Again, thanks for bringing it back.

I have one final question, I noticed that the default mame mappings for retropads is this:

Config Menu: RetroPad1 L3
UI Select: RetroPad1 B
UI Cancel: RetroPad1 Y
  :
P1 Start: RetroPad1 Start
P1 Coin: RetroPad1 Select
P1 Button1: RetroPad1 Y
P1 Button2: RetroPad1 X
P1 Button3: RetroPad1 R
P1 Button4: RetroPad1 B
P1 Button5: RetroPad1 A
P1 Button6: RetroPad1 R2
P1 Button7: RetroPad1 L
P1 Button8: RetroPad1 L2
P1 Button9: RetroPad1 L3
P1 Button10: RetroPad1 R3
  :
(and similar for P2, P3, etc)

Are the mapping of P1 Button6 and P1 Button7 correct? they look like they should be swapped. I know I can map this however I like, but I'm wondering if this is a mistake in the default configuration or is meant to be like that as default.

grant2258

2003+ has more than one map classic and and gamepad(fba modern) controllers

arcade panel options
snes (6button) https://github.com/libretro/mame2003-plus-libretro/blob/master/metadata/wipcontrols/snesmapping.png

8 panel options
gamepad(fba modern)
https://github.com/libretro/mame2003-plus-libretro/blob/master/metadata/wipcontrols/modern.png

my own creation to be more ra core friendly I use this one so i will be biased towards it :(
https://github.com/libretro/mame2003-plus-libretro/blob/master/metadata/wipcontrols/10PANEL.png

pick which one you want in quickmenu-> controls

@hhromic please also clear the all files in the mame2003+ cfg directroy we had some big changes

by a quick look is say your on gamepad atm

the keyboard mode was added by me reluctantly to be honest we are trying to push the core in RA intergration but it wont do any harm

sorry had to add a few detail with the edit

hhromic

Ah didn't know there were different layouts for the retroarch gamepads.
I did start from a fresh clean mame2003-plus installation (no cfg files) and I can confirm it defaults to the 8-buttons gamepad layout as you guessed.
I have a 6-buttons per-player controller, so I will have to use the "snes" layout I think. Will try that, thanks for the pointer!

the keyboard mode was added by me reluctantly to be honest we are trying to push the core in RA intergration but it wont do any harm

I am definitively happy on moving the core more towards RA integration, that's the point of having a LR core in the first place :) The retroarch mode helps in this direction I think, the keyboard mode not so much I agree.

grant2258

make sure you save the controls else it wont remember Im glad you feeling the benefits from this. @markwkidd did most of this work. I just tidied a few bugs so he really deserves the credit for this RA integration. Feel free to pass on any issues you have or suggestions for improvements

Cornervizion

Just a quick message to say that I compiled this earlier and I'm very impressed to see games that I thought couldn't run on my Pi3 ran more or less perfect on this. The only gripe I saw was that Total Carnage produced a screen tearing effect in the top right quarter of the playfield but that could be the fault of the rom.

I'll spend a bit more time with it over the next few days to see if there's any more issues. But very impressed with what I've seen so far 😀

Riverstorm

@Cornervizion said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

Total Carnage produced a screen tearing effect in the top right quarter of the playfield but that could be the fault the rom.

I'm running RetroPie 4.4.3 on a Pi 3, no overclock but I do run a shader (crt-pi). I don't see any issues. I stay above 40 FPS (around 43 occasionally up to 53) the screen looks good with no tearing. Good game. :)

markwkidd

grant2258

Darksavior

I was gonna ask to add Undercover Cops Alpha Renewal but it looks like it was added last week :D

Winklepicker

Hi Guys

Does anyone know if "The Crystal of Kings" is working on mame 2003plus?

If it isnt, is ther anyway to play this game perfectly on pi3 b+?

thanks

markwkidd

@Winklepicker said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

f "The Crystal of Kings"

It isn't part of mame2003-plus at the moment, having been added at MAME 0.90. Crystal of Kings should run in AdvanceMAME or MAME 2010 though. I have no idea how well it runs there.

sirhenrythe5th

@markwkidd crystal of kings works great in AdvanceMame.
It stutters at the very beginning when the player falls down the ceiling, but this may happen on the original hardware too.
Besides that the game is very playable.

Cornervizion

Quick request here...

I've recently compiled the latest build and really enjoying the extra games added such as Avengers - Galactic Storm and Hangzo alon g with seeing Undercover Cops Alpha Renewel version running smoothly on the pi. But I wanted to ask the devs if its possible to include Bonze Adventure (the C-Chip is now emulated in MAME and apparently no longer has the bugs that plagued it) and Legionairre at some point?

Darksavior

Is there a final statement on optimizing taito f3? I wonder why it runs faster on advmame.

lockescow

When in Test Mode F2, some games say Select by Service button, push Test button, my understanding is that F2 is the service button, but pressing it just open and close the menu, not scrolling through the options. I can't hit up or down or any key on controllers, and I have no idea what the Test button is for Mame2003Plus. Any help?

markwkidd

Because of nayslayer's recent video fixes, "backdrop" artwork is now working in this core! Here's warrior for example:

Credit to Grant for the screenshot.

markwkidd

@lockescow said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

When in Test Mode F2, some games say Select by Service button, push Test button, my understanding is that F2 is the service button, but pressing it just open and close the menu, not scrolling through the options. I can't hit up or down or any key on controllers, and I have no idea what the Test button is for Mame2003Plus. Any help?

Some games had several different "service buttons" mapped in addition to the button that enters service mode. I have seen them mapped to keyboard numbers like 9 and 0.

What romset are you using?

grant2258

@lockescow you need to set mame input to keyboard or mame to usekeyboard.

its set to retroarch by default. The input methods are listed below.

retroarch = retropad binds only
keyboard = keyboard only
mame = both modes mixed

lockescow

@markwkidd said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

@lockescow said in mame2003-plus: hundreds of new games, improved input, features, new bugs - now with runahead support:

When in Test Mode F2, some games say Select by Service button, push Test button, my understanding is that F2 is the service button, but pressing it just open and close the menu, not scrolling through the options. I can't hit up or down or any key on controllers, and I have no idea what the Test button is for Mame2003Plus. Any help?

Some games had several different "service buttons" mapped in addition to the button that enters service mode. I have seen them mapped to keyboard numbers like 9 and 0.

What romset are you using?

That was it! It was mapped in GUI under Other Inputs menu as Service 1-4 via 9, 0, -, and =, and not all games have all 4 services. Additionally, it seems also not all games has a functioning Service Menu, and in those games dip switches had to be made via GUI screen. Are there any rhyme and reasons for these inconsistency between MAME games or is it one of those 'it-is-what-it-is' sort of thing with MAME roms?