need help getting after glow xbox one wired controller to work on retropie
-
Pi Model or other hardware: Raspberry pi 3 B
Power Supply used: Normal phone charger
RetroPie Version Used 4.4
Built From: 16 GB mirco SD
USB Devices connected: AfterGlow Wired Xbox one controller, Normal Xbox controller and key bored
Controller used:Normal Xbox controller
Error messages received: xpad patch retropie.diff failed to apply and it wont let me config the controller
Log found in /dev/shm/runcommand.log ):when i try to update it
Guide used: (Mention if you followed a guide)https://retropie.org.uk/forum/topic/3200/afterglow-prismatic-wired-controller-for-xbox-one and https://github.com/paroj/xpadit wont recognize it as a controller on input, its a afterglow wired xbox one controller
when i start it game and plug it in it says generic xbox controller but un configured
-
someone please help
-
As per the rules you agreed to when you signed up, please wait patiently for a reply and do not bump your posts. Have you followed the steps detailed in the setup guide? If so and it's still not working, please fill out the required information found at https://retropie.org.uk/forum/topic/3/read-this-first.
-
i installed both drivers but still not working
-
So i removed xpad, installed it again, updated it (i got the command line from git hub i dont know if its the latest version) I tried everything but the afterglow prismatic xbox controller wont still show up when i press a or anything but when i start a game and plug the controller in this shows up, look at the link https://m.imgur.com/qXjQR7G
“generic xbox pad not configured” it knows its a controller so why doesn’t it let me do the key binds -
Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first
-
Pi Model or other hardware: Raspberry pi 3 B
Power Supply used: Normal phone charger
RetroPie Version Used 4.4 i believe
Built From: 16 GB mirco SD
USB Devices connected: AfterGlow Wired Xbox one controller, Normal Xbox controller and key bored
Controller used:Normal Xbox controller
Error messages received: xpad patch retropie.diff failed to apply and it wont let me config the controller
Log found in /dev/shm/runcommand.log ):when i try to update it
Guide used: (Mention if you followed a guide)https://retropie.org.uk/forum/topic/3200/afterglow-prismatic-wired-controller-for-xbox-one and https://github.com/paroj/xpad -
@cynital said in need help getting after glow xbox one wired controller to work on retropie:
Error messages received: xpad patch retropie.diff failed to apply and it wont let me config the controller
Log found in /dev/shm/runcommand.log ):when i try to update itI thought maybe you were having multiple issues, but it appears that this is already be on the radar to be examined as early as today noted here.
Power Supply used: Normal phone charger
Just a heads up; unless that power supply is rated as specifically being 5v 2.5a, you're going to run into power issues eventually.
-
ok but have any idea why it wont let me config?
-
I wouldn't want to speculate outside of it being related to the driver issue until it's ironed out.
-
@buzz i put everything on the top of the post
-
Does the controller configure ok in EmulationStation initially? Can you navigate the ES menus
?To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@buzz no after i updated every thing and use my key bored to go input the controls for the controller, it tells me to press a on the controller but it wont do anything, i cant config the key binds or anything, it says its supported so idk whats going on
-
@BuZz ok so when starting the system when it loads, every thing says [ OK ] but it says [ failed ] to start load Kernel Modules. see 'systemctl status systemd-modules-load.services' foe details
-
@cynital and what's the output of that command if you type it in?
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@cynital A normal phone charger is not an appropriate power source for a Raspberry PI. Please use a proper power adapter to power up your system.
-
@buzz that the module failed ill take a screen shot later but do you have any idea or fix
-
@mitu ok whats a proper power supply?
-
@mitu Ah I didn't notice that - yeah could be power related.
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
-
@cynital https://retropie.org.uk/docs/Overclocking/#power-supply & https://www.raspberrypi.org/documentation/hardware/raspberrypi/power/README.md
To help us help you - please make sure you read the sticky topics before posting - https://retropie.org.uk/forum/topic/3/read-this-first
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.