EmulationStation stop display image & video in custom-collections

carlhungus74

Lots of line (mainly missing roms in collections).
This is the moment when I launch the rom (720.zip in this case), and go back to the list (with no image/video)

lvl2: Loading custom collection config file at /home/pi/.emulationstation/collections/custom-Taito Classics.cfg
lvl2: req sound [video.launch]
lvl2: (missing)
lvl2: Attempting to launch game...
lvl2: /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS arcade /home/pi/RetroPie/roms/arcade/720.zip
lvl2: Creating surface...
lvl2: Created window successfully.
lvl1: Tried to enable vsync, but failed! (Negative swap interval unsupported in this GL)
lvl2: req sound [video.back]
lvl2: (missing)
lvl2: Added/Updated 1 entities in '/home/pi/RetroPie/roms/arcade/gamelist.xml'
lvl2: EmulationStation cleanly shutting down.

mitu

Does this happen with other themes or just with the Chicuelo theme ?

carlhungus74

Try with carbon theme. Same thing. Videos are not displayed when back to list.
When back to system menu and re-open collections, it works again.

pjft

Do you have power savings enabled? Can you send over your ES settings file via pastebin or something?

I'm fairly sure I can't replicate that here, but I'm happy to look into it tomorrow. What ES version are you on? What do you need to do for a video to display again? Does navigating up/down work?

Can you check if this still happens on the es-dev package?

carlhungus74

Hello,
Thanks for you reply.
Power saver modes is disabled.
This is my es settings :
https://pastebin.com/mLsEFjQq

To get the image/video working again, I must go back to the system carousel then enter again in the collection folder.

This is a small video I've made :

description :
I enter "collections" menu, then highlight "Atari Classics" collections. You can see a video playing on the right.
I enter "Atari Classics". You can see video for the titles I highlight.
Then I launch APB, and exit it.
You can now see there is no more video for the games titles. If I go a level up (collection level), the Atari Classics does not display video either. I go a level up again (system level) and by entering again in Collection, everything works again.

EmulationStation is v2.7.5RP. I will check with ES-Dev.
Hope this helps.

pjft

@cacrlhungus74 Thanks. Let me know how it goes with emulationstation-dev.

The only differences I can spot on my setup are that I'm using OMXPlayer, and that my transition isn't set to instant.

I haven't really tested it yet, but let me know if any of these settings change the behavior, and/or if it no longer happens on emulationstation-dev.

carlhungus74

Hello, Got the same issue with ES 2.8.0RP-DEV.

I try "Transition style = Slide" instead of "instant". Same thing.
About OMXPlayer, I don't know about it, where it could be changed ?

pjft

@cacrlhungus74 Other Settings, I believe.

carlhungus74

I perform these tests on my ubuntu machine. I don't see this OMXPlayer setting. Maybe only on Pi ?

pjft

@cacrlhungus74 Ah.

Well, yes. I was not aware that you were not on a Pi.

Let me look into this when I have a moment. Probably will take a few days.

carlhungus74

I mention it on a previous post. (number 5 in the thread) :)

But note the issue is exactly the same on the Pi and on the Ubuntu machine.
That's why I took the liberty to perform tests on the ubuntu, it's more easy to make screenshots and so on...

pjft

@cacrlhungus74 I just tested it on my end, both omx and VLC, carbon and artbook themes, wasn't able to replicate the issue. While I did see your video, I have little more to work with here. Unless someone else is able to replicate it or has any more insights, it's a puzzle to me why this specific scenario would not work, and why it's different to launching a game in a subdirectory. Can you try the latter and see if it fails as well?

carlhungus74

@pjft I just try to create a subdirectory (named level1) in my arcade folder, and another subdirectory (named level2) into the level1 folder, to have two sub-levels, like in the collections.
I perform the same steps :

go into "arcade" folder
go into "level1" subfolder. Rom Video is working.
go into "level2" subfolder. Rom video is working.
Launch rom in level2 folder
Quit rom
Go back in level2 folder : video is still working.
Go a level up : video is still working.

So it seems something is different between the subdirectory and the collections folders.

pjft

@cacrlhungus74 interesting and puzzling at the same time.

Once again, lacking anyone else looking into something similar, I'm kind of lost here.

So, to confirm:

this happens on the pi as well,
with both omx player enabled and disabled,
in the default carbon theme,
only on the custom collections folder,
for any collection and game

...

I'm truly stumped.

If you launch the exact same game on its native folder all works well, I assume.

You tested all these changes (vram, transition, power savings, etc) on the pi?

For the sake of troubleshooting it'd be easier if we're focusing on the pi for now if possible.

What image was this based on, if you don't mind me asking? Also, how did you create the collections?

Edit: could you try a game without a launch image, if you have any?

Thanks.

carlhungus74

Hello again,

Yes I confirm it happens on my Pi3B (no overclock)
Checked with omxplayer or without : same issue
Tried carbon theme, chicuelo or tronkyfran : same issue
apparently only on collections folder. Try in Arcade with 2 subfolders. No issue.
Tried many collections and games : same issue (of course haven't test all collections or games, I've got a lot..)
If i launch the same game in its native folder, no problem.
Tested vram, transition and so on on the Pi..same thing, issue is still there.
Try to launch the game from my video, (apb) without launch image : same issue.

Image is the official 4.4 retropie (I perform updates regularly)

Collections are created manually (with a text editor). Content is similar to this :
/home/pi/RetroPie/roms/arcade/720.zip
/home/pi/RetroPie/roms/arcade/apb.zip
/home/pi/RetroPie/roms/arcade/arcadecl.zip

To be sure, I have created a collection by using the ES Gui, and I encounter the same issue.

I know this is a strange issue. Of course it's not a big one, it's really minor; but it puzzled me also :)

pjft

@cacrlhungus74 well, it puzzles me as well, so I'll see if anyone else can replicate it or if anything else comes up.

I imagine you wouldn't have a spare SD card to try with a fresh RetroPie image and start from there?

carlhungus74

Unfortunately not. But I will perform this on my ubuntu machine (as the problem is the same).
Will start with a fresh install of retropie and copy my collections on it, and try to see when the problem occurs.

carlhungus74

Test done on a fresh install on ubuntu. ES v2.7.5RP. Add some roms in arcade folder.
Create 2 collections with the ES Gui. Same issue. become more and more stranger.

Just an idea : could it be explained by a retroarch crash during exit (for example when quitting the emulator by hotkey). This crash is not visible by the user (as we get back to ES). But when I look into the dmesg, It seems something wrong with retroarch.

pjft

@cacrlhungus74 well, I was wondering if it'd be something related to upgrading any of the OS libraries, hence the suggestion, but see if it works on Ubuntu.

Can you try the different view types and see if anything changes? With a theme with images, do images show?

pjft

Well, it's unlikely, but let's bite that lead. Can you try a non-libretro emulator then, say AdvMame?