Asking for retropie login on boot? (after update)

bryinvegas

I having the same problem, I’m getting in and changed password but it keeps booting to the command prompt screen . When I go to rasp config and try to change boot options like suggested in many thread reply’s but it reboots to the command prompt screen and won’t boot to ES.

Is the a way yo get to RetroPie setup from command prompt to change settings?

Thanks

mitu

@bryinvegas said in Asking for retropie login on boot? (after update):

Is the a way yo get to RetroPie setup from command prompt to change settings?

Run

sudo ~/Retropie-Setup/retropie_setup.sh

and you'll have the RetroPie script started and you can make changes.

bryinvegas

@mitu thanks so much

Potatopops9

@paffley HELLLLPPPP i rebooted my pi 3 after updating everthing and this happened! I SPENT OVER $200 ON THIS :( i kinda tired to type other things in but it dosnt work SERIOUSLY WHAT IS THE PASSWORD!!!!!!

mitu

@Potatopops9 The solution is in this topic - have you tried applying the fixes suggested ? For the record, you're supposed to write pi at the login prompt and press enter, then write the password (raspberry). You've wrote sudo passwd pi , password instead.

BuZz

@Potatopops9 I'd get a refund!

Potatopops9

@mitu what so what do i do ? PS im using this on my raspbery pi 3b+ booting retropi 4.4 i think

BuZz

@Potatopops9 follow the instructions given above. Well, either @mitu 's advice or mine.

Potatopops9

@BuZz i tried pi for the login and password for the password but it didnt work :( it said it timed out after 60 seconds

BuZz

@Potatopops9 because that's not the password. It's raspberry as @mitu has already said.

VRINGAME

@Potatopops9 @paffley I tried to redo here and realized that the "Y" and "Z" key are changed in my appraisal.
So at the time of typing the password I wrote:
raspberrz

VRINGAME

This post is deleted!

Potatopops9

@mitu hey guys do you know how to fix this problem?

after doing this the. retropi terminal wont let me go back to emulationstation please help :( also i noticed when i tried to get to emulationstation but instead it said: -bash: emulationstation: command not found

BuZz

@Potatopops9 Why did you do the above ? You have removed RetroPie.

ballboff

@BuZz said in Asking for retropie login on boot? (after update):

@Potatopops9 Why did you do the above ? You have removed RetroPie.

yeah rm command is remove directory. You need to reflash your sd card and start again.

keebler71

Ok...so I ran into the same issue after running "update all" tonight. At each reboot I get dumped to console and "pi:raspberry" doesnotwork. No, I never changed the password, this was a fresh flash. Yes, I know that you don't see the password when you type it. No, I'm not a noob, I've been using MAME and linux for about 20 years. No, I can't ssh in either. The only thing I can think of is that the keyboard maps were changed, (I tried swapping the "y" for "z" in "raspberry" but that didn't work either. The comments in this thread directing people to run the config are not helpful if you can't get past the login prompt....

mitu

@keebler71 You've already seen the responses here in the topic. The update doesn't update your password - so unless you changed it after install, it should still be raspberry.
What's the error message you get when you try to log in ?

SuperNu69

@mitu - Do you know if they keyboard still defaults to the UK layout? It's been a while since I setup my RPi, but I do remember having to set it to use the US layout.

@keebler71 - I seem to remember that the keyboard layout was set up for UK and had to change it to the US layout. Could that possibly be your problem?

--SN

mitu

@SuperNu69 said in Asking for retropie login on boot? (after update):

@mitu - Do you know if they keyboard still defaults to the UK layout? It's been a while since I setup my RPi, but I do remember having to set it to use the US layout.

It still is (that's the Raspbian default, carried out in RetroPie), but I don't think that's a problem to enter the user/password. It's usually a problem when you try typing ~, since it's in a different location on an UK keyboard layout.

keebler71

The error I get is "Login incorrect". I will replicate it tonight, but I am positive that I never changed the default password, and after the update, pi/raspberry (the default) does not work at the login prompt. The only system level config items I changed on initial setup were the localization options (language and keyboard from UK to US). Someone else in the thread had pointed out the keyboard mapping could have changed, which is why I also tried y->z in raspberry to no effect (I also typed the password "raspberry" into login prompt, just to verify that it did map correctly to the screen (which it did)