Issues with an XBOX One controller
-
So, i've installated the latest version of Retropie(v4.4) or my RPI model 3 b+.
On the first boot, the controller worked well after the configuration. But, after I installated the update package, I couldn't press start button. So I've reset the controller input. Then when i had to do the configuration, the trigger were named axis +3 for the left trigger and axis+5 for the right trigger (wich was named button "number" before (like the "a" "b" "x""y"). Now the triggers don't work on ps1 games, and i have to plug and unplug the controller to get it work in a game. I assume that the update caused that since it used to worked before. -
@velie Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first
Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..)
Power Supply used: (If using a Pi)
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest):
Built From: (Pre made SD Image on RetroPie website, Berryboot, or on top of existing OS etc.. - please provide the filename of any image used)
USB Devices connected:
Controller used:
Error messages received:
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: (Mention if you followed a guide)
File: (File with issue - with FULL path)
Emulator: (Name of emulator - if applicable)
Attachment of config files: (PLEASE USE PASTEBIN.COM FOR LARGE LOGS)
How to replicate the problem: -
@velie Re-install the
xpaddriver (https://retropie.org.uk/docs/Xbox-360-Controller/#xpad-driver), reboot and try-remapping again. If it doesn't work, then please follow @rbaker's advice and add the necessary information to your post. -
@mitu thanks it worked
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.