OpenBOR 6xxx OpenBeta Testphase

[agboju_logun]

@greenhawk84 Aye, you’ll have to use the keyboard to set up the controller the first time you launch a game. You can save the changes in the config menu, this will apply the controller settings to all games.

[GreenHawk84]

@agboju_logun okay thank you, I use the Xin-Mo USB controller for my Arcade cabinet and OpenBOR games would be super awesome if I could get them as their own system and have them use the control panel instead of a keyboard.

[GreenHawk84]

Hello, I am not very good at the SSH aspect of Retropie, but I think I did the Extras installation correctly by just copying the commands from Zerojays github into my Putty screen, it seemed to do something.

cd ~
git clone https://github.com/zerojay/RetroPie-Extra.git
cd RetroPie-Extra/
./install-extras.sh

And then I went into the Retropie setup menu from Emulationstation and ran the install openbor from Source. It added OpenBOR to the Ports menu and launched into the OpenBOR paks menu. I know this is not the intended outcome to do it, so I wonder where I went wrong?

[GreenHawk84]

Okay, so I got a little farther by noticing there were two openbor.sh files in my folders, so I deleted the older one and kept the one dated today. I found openbor number 20 in my experimental packages and installed it. It ran this screen:

But then when I went to look for openbor in my roms folder, there wasn't a folder. So I made one and placed a .pak file in it, but it still did not show in my ES main menu.

[BMovieBen]

@greenhawk84 You're almost there - I had the same issue. Removing that old openbor.sh file was the right thing to do. Make sure emulationstation is closed before proceeding to the next step.

The next thing you need to do is edit /etc/emulationstation/es_systems.cfg to add the pak extension for openbor. See this other separate thread with an example.

Again you'll want your pak files to be under /home/pi/RetroPie/roms/openbor/

Launch emulationstation again.

Launch an openbor game through emulationstation with a keyboard and gamepad connected, go into options, map the inputs, then you can use the controller exclusively. You will have to do this for each pak separately - there's no universal input mapping for openbor as far as I know.

[agboju_logun]

@greenhawk84 Yup, same probs here too. You should be sorted if you follow Ben's post.

I saw your reply on the Streets of Rage Remake thread regarding the widescreen option. As per my comment on there, it didn't run great on my 3b+ but I've been playing Streets of Rage 2X tonight on OpenBOR and it looks really nice in widescreen mode, especially with the 16-Bit 2X filter on, so maybe have a look at that once you get everything set up. The latest version is v2.2 but that crashed for me so I went with the 1.6 (Lite) version and no probs so far, plays really nice.

[agboju_logun]

@bmovieben said in OpenBOR 6xxx OpenBeta Testphase:

You will have to do this for each pak separately - there's no universal input mapping for openbor as far as I know.

That's odd mate, are you having to set up your controller for each pak? I've only had to do it the once following the 6510 install... not looked into why, maybe some wizardry going on :)

I'm sure last time I built my rpi, when there were separate 6xxx and 3400 OpenBOR packages, I updated a script to avoid having to set up my controller for each game. It'll be documented in one of the threads on here.

[GreenHawk84]

WOW! I got it! I have been wanting this for so long. Thank you so much for the help! Is it just me or are the instructions to get this running not exactly complete? I did see the OpenBOR entry in es_systems.cfg, but the extension and such was incomplete. Again, this is crazy now! What settings do you guys use? Do you keep OpenGL etc?

[agboju_logun]

@greenhawk84 Nice one! The only thing I've changed besides my controller settings was setting the 16-Bit 2X filter.

I agree that the instructions for this method could do with a couple of extra steps adding given a few of us have hit the same problems.

@cyperghost would you be happy to update the first post to include these additional steps for the "Install via RetroPie-Extras" method please?

Extra pre-install step:

• Delete the ports openbor.sh that comes as part of the RetroPie setup (/home/pi/RetroPie-Setup/scriptmodules/ports) prior to running the 6510 install script.

Extra post-install steps:

• Create the roms/openbor folder manually
• Update the OpenBOR entry in es_systems.cfg to include:
  <extension>.PAK .pak</extension>
  <fullname>OpenBOR</fullname>

[GreenHawk84]

@agboju_logun thanks, do you know how we can set a theme to this? I notice Retropie does not have anything listed in /etc/emulationstation/themes/carbon. I also had to set my view to "Video" in ES on OpenBOR so I can begin to scrape and set metadata with videosnaps etc.

[agboju_logun]

@greenhawk84 I think you just need to copy another emulator folder, rename it “openbor” and replace the system logo (there’s one in this thread here).

I use the Artbook theme which does include an OpenBOR folder.

[IGA]

@kactius said in OpenBOR 6xxx OpenBeta Testphase:

https://www.chronocrash.com/forum/index.php?topic=4460.0

Hello)
How to run tmnt rescue-palooza at latest official build of openbor for Rbpi4 (from 8 sept 2020)

[shavecat]

@iga said in OpenBOR 6xxx OpenBeta Testphase:

tmnt rescue-palooza

Not working well
some levels wont play ...

[IGA]

@shavecat
yes, I have already encountered this problem....
A couple of years ago I discussed first on the forum of developers http://www.chronocrash.com/forum/index.php?topic=4460.0 and then through a personal contact with them about this problem on android. As a result, they even sent me some light versions allegedly (which I should not have shown to anyone, etc.), but the effect was the same.
In the end, I just picked up the version of openbor for android in which everything worked by default.

Actually, the question is, what versions of openbor are there for raspberries and where can they be taken from?

[GreenHawk84]

OpenBOR has been working good so far on my stock Pi4. Just wondering with this 6xxx installation, will it be possible to "Update installed packages" without any adverse effects on OpenBOR? I would hate to break it if I do a routine update via Retropie Setup.

[IGA]

@greenhawk84 said in OpenBOR 6xxx OpenBeta Testphase:

OpenBOR has been working good so far on my stock Pi4. Just wondering with this 6xxx installation, will it be possible to "Update installed packages" without any adverse effects on OpenBOR? I would hate to break it if I do a routine update via Retropie Setup.

Is it possible? As i said , it show me OpenBor version 3.0 build 3016 from 8 septemer 2020 and no update option avaible

[GreenHawk84]

Okay, just to confirm, I "Updated all packages" via Retropie Setup and upon arriving back to Emulationstation on a reboot, my OpenBOR system was gone because the es_systems.cfg file was overwritten with the default. No biggie, just replaced the entry and it was back with all my scrapes and games working.

[GreenHawk84]

Just curious if anyone sees a difference when setting SDL vs. OpenGL in the video settings? I am not seeing a difference but I am looking to see if performance changes such as screen motion and sprite motion.

[IGA]

@greenhawk84 said in OpenBOR 6xxx OpenBeta Testphase:

No biggie, just replaced the entry and it was back with all my scrapes and games working.

and what about resque-palooza?

[GreenHawk84]

@iga yes I tested TMNT and it was fine, still had my save game intact.