Backdrops in mame2003-plus

UDb23

@Clyde Actually it's no longer a BD. MrDo listed it and provided this cardboard artwork as BD; but you now no longer need the BD; just apply my RA overlay. Better quality and no impact on performance.

Clyde

@UDb23 It's not suitable for 4:3 screens, I suppose?

UDb23

@Clyde Considering that it exactly fits the upper boxes and radar @1080p, probably not.
As I recreated the cardboard in vectors I could generate a 4:3 game area only overlay for you to try. What res?

Clyde

@UDb23 That would be great, thank you for the offer! It's still my trusty old 1600x1200. :)

Riverstorm

@UDb23 - Battle Zone looks sharp. Nice job "cutting" out the holes. Was the original backdrop white? I am so used to seeing green from Mr. Do's old art that it threw me a little on first load.

Do you know if you can enable them separately (backdrops and overlays)? I see "Display Artwork" in the core options but seems to display both.

I was getting Mr. Do's Battle Zone Artwork loading from the Artwork folder at the same time with the new overlay/BD. I know AdvMAME you can enable them as separate options globally and/or per game.

UDb23

@Clyde said in Backdrops in mame2003-plus:

It's still my trusty old 1600x1200. :)

Done. It should fit the "cutouts" but got no way to test on my side.
Files here: https://github.com/UDb23/rpie-ovl/tree/master/arcade/Battlezone

UDb23

@Riverstorm said in Backdrops in mame2003-plus:

Was the original backdrop white?

Original in good condition (how it looks without blacklight):
Battlezone_bezel small.jpg

Most pictures you find are more "yellowish" and have more faded blue due to cardboard deteriorating over time.

I am so used to seeing green from Mr. Do's old art that it threw me a little on first load.

Green from MrDo doesn't match the original blacklight inks (personal opinion).
This is a real one:

Shown event better better in this video:

Blacklight used in early upright release (periscope) and therefore "greenish UV"; cabaret no longer used blacklight so color looked like first image but artwork slightly different.

You may have noticed I do quite extensive research before creating overlays or BDs
;-)

Green "UV" overlay in the works....

I see "Display Artwork" in the core options

Has no influence on RA overlays AFAIK. Does affect Mame overlays and BD. You need to remove the mame artwork zip from the folder but still keep "display artwork" enabled (it does the red & green vectors in the core).

Riverstorm

@UDb23 - That's some nice pics and extensive research, thanks for sharing. I like reading that type of stuff and seeing the original as memory is definitely nostalgic vs. the "truth". I had no idea it was more "white".

With Omega Race I went back and forth between UV1 and UV2 before settling on UV2 as my final backdrop. I like that UV look.

Ok, thanks for the information. I think I am straightened aroundn now. I did a bit of testing and it seems "Display Artwork" turns backdrops on and off only and doesn't affect overlays just like you said.

I would disable "Display Artwork" in Battle Zone it would remove the "backdrop" but loose the color also. I had no idea you had to enable Artwork to get color. Is that embedded in the code or is it an overlay or something?

Back to the point my confusion came from the old Mr. Do Battle Zone artwork. I thought it was a backdrop and overlay combined but I see it's a single .png and designated as a backdrop in the .art file.

Interesting thing about AdvMAME when you use the old Mr. Do Battle Zone artwork it actually clips the left and right side art and only leaves the top bar so I thought they were different file designations like an overlay and backdrop.

AdvMAME seems to only display the game area. I couldn't get the side bars in Battle Zone to display correctly. In Plus it works fine.

The shortest way to disable overlays I found was to rename the game.zip.cfg since there's no RA/core option to turn that feature on and off.

I keep thinking overlays should be like backdrops and have a enable/disable option.

Mr. Do's Space Invaders art has both an overlay and backdrop combined in one file. With AdvMAME you can turn them on and off separately as they have section headers in the .art file like "backdrop:" and "overlay:" that can be loaded or ignored depending on the option settings.

Anyway thanks for pointing that out and looking forward to the UV version.

UDb23

@Riverstorm said in Backdrops in mame2003-plus:

Is that embedded in the code or is it an overlay or something?

It is embedded and think it's game driver specific. Found it by playing around with the options.

Interesting thing about AdvMAME when you use the old Mr. Do Battle Zone artwork it actually clips the left and right side art

I seem to remember it has an option to display full bezel/overlay/BD vs crop (=just the game area)

Riverstorm

@UDb23 said in Backdrops in mame2003-plus:

I seem to remember it has an option to display full bezel/overlay/BD vs crop (=just the game area)

Ah, ok, I will keep that in mind. I have part of my vector games in AdvMAME and as you make overlays or backdrops for certain ones I move them over.

UDb23

@Riverstorm Did you install latest advmame 3.9 ?
Do you compile it from source?
Gonna try it when I have some time.

UDb23

@Riverstorm said in Backdrops in mame2003-plus:

seeing the original as memory is definitely nostalgic vs. the "truth".

Totally agree.
I had a chance to play some of these old vector classics, at the time when they were the most innovative technology. I remember Star Castle was presented at an exhibition intended for operators only, but somehow we were able to attend ;-)
And of course Asteroids and later on Star Wars: the cockpit version simply was a dream; you felt like flying your x-wing into the trench !! Unforgettable.

Riverstorm

I am actually still on 3.8. I haven't upgraded AdvMAME in quite some time. I do upgrade keep my RetroPie script upgraded and mainly Plus as that's where I've spent all my time lately.

I love hearing those type of stories, that's what makes the nostalgia so strong and it had such a powerful effect it keeps projects like this alive.

Clyde

@UDb23 I tested the 4:3 bzone overlay. It works, but it's slightly off vertically (the radar's upper mark isn't in the cutout).

Alas, the Retroarch screenshot function doesn't include the overlay, so I can't show it to you at the moment (I'll have to leave for work soon). Can you suggest a screenshot software for the Pi that will include the overlay?

edit: If it helps, here's a screenshot in 1600x1200 without the overlay: https://i.imgur.com/9ZdFdkR.png

UDb23

@Clyde Understood, no need for additional pics. Let me check.

UDb23

@UDb23 I usually just take a photo of the tv with my smartphone. Not perfect but effective.

caver01

@UDb23 I am running AdvMAME 3.9 now, installed from binary on my recent rebuild.

By the way, thanks for the input about smoothing with the vectors. I know I messed up posting my question on the wrong thread, but wow did that smoothing ever make a difference. The vector system look perfect now.

Clyde

@UDb23 Although I do have a smartphone, I only use it as a digital camera, not as a phone (I bought it from a coworker for 50€ for that reason alone).

Thus, it's a bit cumbersome to transfer the pictures to my PC afterwards. Motivated by the current problem, I may look into other screenshot software for the Pi that can also grab overlays, if only for future use.

UDb23

@caver01 Glad it helped.

Riverstorm

@Clyde - Here's a link to raspi2png. It's small and works well but you need to SSH into your Pi with PuTTY (or some other terminal emulator) while you play on another display or TV but it will capture the screen exactly as you see it with overlay and backdrop at the displays resolution.

You don't need to do step 2 if you're going to run it from the downloaded folder. It will create a folder named raspi2png in your home folder that works well but you will need to use ./ in front of raspi2png to run it (if you prefer not add to the bin folder). The only difference is the ./ in front specifies the current folder vs. the search path.

Also snaps are named snapshot.png in the current folder and will overwrite on each run unless you use -p parameter shown in step 3 below. If you only need one snap at a time then you wouldn't need to specify a name. Other parameters listed below.

Basic steps:

git clone https://github.com/AndrewFromMelbourne/raspi2png/
sudo cp -a raspi2png/raspi2png /usr/local/bin
raspi2png -p "mysnapshot.png"

Usage: raspi2png [-p pngname] [-v] [-w ] [-h ] [-t ] [-d ]
-p - name of png file to create (default is snapshot.png)
-v - verbose
-h - image height (default is screen height)
-w - image width (default is screen width)
-t - type of image captured
     can be one of the following: RGB565 RGB888 RGBA16 RGBA32
-d - delay in seconds (default 0)