4.0-rc2 images are available for testing.

PokeEngineer

Just an minor detail, but if you mind putting the pre-release tag on the 4.0-beta2 image release and when the 4.0-beta3 image release comes out, this would be greatly appreciated. Thanks!

BuZz

Strange as I had the pre-release tag set before - at least I remember setting it. Maybe it got edited/removed at some point. Set again. Thanks for the heads up.

PokeEngineer

@BuZz

Sorry if I was nit-picking...

BuZz

Not at all - in fact it was incorrectly showing in the downloads on the main site which I didn't want.

4.0 may come out soon after beta3 as most of the issues relating to the recent retropie-setup changes have been sorted now I think.

PokeEngineer

@BuZz

Thanks! :)

BuZz

@me
when installing lxde, you are now given the option to fix the permissions so startx can be launched from ES

I also fixed up the dxx-rebirth launch links - please update retropie-setup and reinstall it from binary.

BuZz

@Riverstorm said in 4.0-beta2 images are available for testing.:

On the other suggested testing I need to reimage back to the original 4.0-beta 2 first before update and loading the driver?

no. can just do it from your updated image. I just need to see if forcing removal of the xpad driver helps before launching xboxdrv, and also if the packaged raspbian xboxdrv behaves differently from our updated one.

This testing would be very helpful - thanks.

Riverstorm

@BuZz said in 4.0-beta2 images are available for testing.:

@Riverstorm said in 4.0-beta2 images are available for testing.:

On the other suggested testing I need to reimage back to the original 4.0-beta 2 first before update and loading the driver?

no. can just do it from your updated image. I just need to see if forcing removal of the xpad driver helps before launching xboxdrv, and also if the packaged raspbian xboxdrv behaves differently from our updated one.

This testing would be very helpful - thanks.

Ok, I actually did a fresh image already and updated it. I do have a quick question. I will need to install and configure the xboxdrv first so the correct lines are part of the rc.local so I can modify them?

BuZz

@Riverstorm yes

Riverstorm

@BuZz said in 4.0-beta2 images are available for testing.:

@Riverstorm yes

Thanks Buzz, it seemed logical after looking at the rc.local but I wanted to verify it just in case.

Riverstorm

@BuZz said in 4.0-beta2 images are available for testing.:

@Riverstorm said in 4.0-beta2 images are available for testing.:

On the other suggested testing I need to reimage back to the original 4.0-beta 2 first before update and loading the driver?

no. can just do it from your updated image. I just need to see if forcing removal of the xpad driver helps before launching xboxdrv, and also if the packaged raspbian xboxdrv behaves differently from our updated one.

This testing would be very helpful - thanks.

I am not sure on the intended results but this setup seems even worse. I can get them connected as 1, 3 & 4 but not 2 it flashes the green ring. I can power them off and on and they will reconnect (green quadrant light for proper controller connection) but the issue is none of them work. I can't even configure them for input let alone use them.

Here's slightly different errors when exiting ES with Ctrl-F4:

[ERROR] USBController::on_read_data(): USB read failure: 32: LIBUSB_TRANSFER_ERROR
[ERROR] USBController::on_write_data(): USB write failure: 12: LIBUSB_TRANSFER_ERROR

EDIT: Here's my /etc/rc.local modifications after installing the xboxdrv.

rmmod xpad; sleep 2

"/usr/bin/xboxdrv" --daemon --detach --dbus disabled --detach-kernel-driver --id 0 --led 2 --deadzone 4000 --silent --trigger-as-button --next-controller --id 1 --led 3 --deadzone 4000 --silent --trigger-as-button --next-controller --id 2 --led 4 --deadzone 4000 --silent --trigger-as-button --next-controller --id 3 --led 5 --deadzone 4000 --silent --trigger-as-button

BuZz

thanks - and with the rmmod xpad; sleep 2 but the original xboxdrv line also ? Any difference ?

also please can you post the output of lsmod after putting the xboxdrv line back as it was (but keeping the rmmod)

Riverstorm

@BuZz said in 4.0-beta2 images are available for testing.:

thanks - and with the rmmod xpad; sleep 2 but the original xboxdrv line also ? Any difference ?

also please can you post the output of lsmod after putting the xboxdrv line back as it was (but keeping the rmmod)

Modified lines in /etc/rc.local:

rmmod xpad; sleep 2

"/opt/retropie/supplementary/xboxdrv/bin/xboxdrv" --daemon --detach --dbus disabled --detach-kernel-driver --id 0 --led 2 --deadzone 4000 --silent --trigger-as-button --next-controller --id 1 --led 3 --deadzone 4000 --silent --trigger-as-button --next-controller --id 2 --led 4 --deadzone 4000 --silent --trigger-as-button --next-controller --id 3 --led 5 --deadzone 4000 --silent --trigger-as-button

It's different but not good. I was able to get a stick configured via Configure Input but they all just have the flashing green circles. I could navigate with controller one. Entering a game controllers 2-4 didn't work. After a disconnect and reconnect of controller one I lost connection to all of them.

lsmod output:

pi@retropie:~ $ lsmod
Module                  Size  Used by
bnep                   10340  2
hci_uart               17943  1
btbcm                   5929  1 hci_uart
bluetooth             326105  22 bnep,btbcm,hci_uart
brcmfmac              186343  0
brcmutil                5661  1 brcmfmac
cfg80211              427855  1 brcmfmac
rfkill                 16037  4 cfg80211,bluetooth
snd_bcm2835            20511  0
evdev                  11396  5
snd_pcm                75698  1 snd_bcm2835
joydev                  9024  0
snd_timer              19160  1 snd_pcm
snd                    51844  3 snd_bcm2835,snd_timer,snd_pcm
bcm2835_gpiomem         3040  0
bcm2835_wdt             3225  0
ff_memless              4750  0
uio_pdrv_genirq         3164  0
uio                     8000  1 uio_pdrv_genirq
uinput                  7454  4
fuse                   83461  1
ipv6                  347530  34

Riverstorm

@Buzz I need to go back and recheck this testing (xboxdrv with rmmod xpad). I need about an hour to finish something and will post back for sure on this.

Riverstorm

I just wanted to verify I was in lr-mame2003 as it has joysticks pre-configured (Gauntlet is my 4 player test). With this configuration arrangement all the joysticks flash even the working one when connected so to test them I play a game. That is unless the other sticks should all be able to scroll through the options in ES. Joystick one works and I was able to fully use it to select & play. Joysticks 2-4 flash green with no response.

BuZz

4.0-rc1 is released - see first post in thread.

BuZz

@Riverstorm thanks for the feedback.

cooky069

Not sure if this is a bug or not but I tried 4.0-rc1 last nite and noticed that when I tried setting up overlys none were available . The only option was unset . I looked in to the file system and it appears the entire overlays directory is missing. Decided to try beta2 and the same thing happened but 3.8.1 is fine

BuZz

@cooky069 you need to install them from packages -core - retroarch - configure or setup/tools - retroarch. You can now keep them updated separately from retroarch

cooky069

Thanks I'll have a look when I get chance . I was in configuration then all retroarch cfg , was able to set overlays on but when I clicked on the next option down to select an overly is when I encountered the problem . But if they need installing first then I must have missed something, so hopefully that's it