nespi case yellow light bolt
-
so i bought the nespi case
http://retroflag.com/nespi-case-plus.html
(its original i check)
im using double fan -
https://www.ebay.com/itm/Ultimate-Dual-Cooling-Fan-Kit-For-Raspberry-Pi-3-NESPi-Retropie-Wenig-Larm/401598410752?hash=item5d81217000:g:qFgAAOSwTORa1e4L
.
and i have a hardirve usb with more games on it to load and play.
the case before worked perfect with no warnings.but with the new case im getting the YELLOW BOLT LIGHTING Every time i put the harddrive usb on.
driving my crazy ...so for now im back with the old crappy frame box. :(
did anyone try it before the case?
help plz -
@shavecat Power issues with the nespi case are fairly well known. You are also running a lot of extra power hungry devices. What power supply are you using?
-
@quicksilver
original 2.5 pi power
also have 3.0 but its unstable ./So i guess the case sucks ? :O
-
@shavecat Not sure what you mean, is that the amperage? What brand?
-
https://hackstore.co.il/wp-content/uploads/2016/04/מטען-מיקרו-USB.jpg
have this company (mircase) but 2.4 amperage yes . (didnt do any trouble with the old case) -
@shavecat I would try the official power adapter
-
@quicksilver said in nespi case yellow light bolt:
official power adapter
Ebay ?
where i can find it and order it ? -
@shavecat I have the retroflag nespi case and can confirm that there are some things that should be fixed. There used to be an issue with shorts over the wires connecting the power inside the case, mine didn't have that problem and it is reported to be fixed, it may still be useful to examine the wiring on the power connector.
There is a similar problem with the usb connectors inside the case, the wires are very thin. I customized the case to fit a 256 gb thumbdrive with a big noctua fan. I had to take a dremel to the case and an off-the-shelf usb cable to get everything to fit. It took a lot of work but I can confirm that it can be done.
I'm using the kanakit 5v 2.5amp adapter, haven't had any power issues and I keep a bunch of stuff connected to it at times.
-
Replacing the wires in the nespi case to larger wires is the fix for the nespi cases. Running a hard drive without its own power is pretty power hungry.
-
So i need to give up on the case ??
i didnt really get it .
so if i will put the usb 1tg it will always give me the light yellow bolt ???
cause in a plastic case everything works fine.
@GoldManSex778
are u having also harddrive usb to it ?
or are u saying i need to connect the hard drive itself to the raspberry pi itself inside the case ???
not with the usb the have in the case itself ???
and if so i will have to make a hole and fix the case by my self ??? -
@shavecat Are you trying to power the USB drive off the PI ? That's not going to work - you need to power the USB drive externally - no matter what case you have.
If you want to see if the case is faulty, just remove the PI from it and see if you still get the low voltage warning with other devices connected. As the other said already, make sure you're using a proper power source for the Pi. -
@mitu
everything works fine before with the old case..
with the hard drive usb, no lighting bolt ever .
will try to buy power adapter and check again.
thanks -
@shavecat said in nespi case yellow light bolt:
everything works fine before with the old case..
In this case, I think the answer is obvious. As I said, it's a simple test you can do to see if the case is at fault - remove the PI from the case and try to see if you get the under-voltage sign. If you still get it, then it's the case, not the power supply.
-
@mitu
Yep , So i get it only when i plug in the usb harddrive . -
@shavecat are "u having also harddrive usb to it ?" I don't keep one connected to it but it will run one without power issues.
"are u saying i need to connect the hard drive itself to the raspberry pi itself inside the case" - I wouldn't recommend doing that for heat reasons if it is even possible, I am using a thumb drive and it barely fits.
"not with the usb the have in the case itself ???" I run the thumb drive off the internal usb. I only use the external usb ports for keyboard mouse and gamepads, but it does power a usb drive without lightening bolts.
"and if so i will have to make a hole and fix the case by my self ???" - No definitely not, there is no need to cut any holes. The easiest thing to do would be examine the wiring on the usb hub on the nespi case, you can either fix the existing wire with a soldering iron or just replace the wiring all together. Honestly the best solution may be to just take out the nespi's usb hub and wire a direct usb extention to the raspberry pi's usb connectors; that is what I have been planning on doing to mine since the usb hub is just a liability and it would make more room inside.
"So i need to give up on the case ??" - Not at all! it is a great case, looks just like an OG NES and has plenty of room for goodies inside. I knew the wiring was a problem when I bought mine but I was planning to customize it anyway. For the price it is pretty good, but it is fair to expect the wiring to be adequate.
-
@GoldManSex778
Thanks alot ,
will give it a try when the power supply will come. -
I'm going to buy a new powersupply, to upgrade from the aftermarket 5V 2.5A, and hopefully alleviate the low voltage while charging a controller.
Maybe I can recycle my old Power supply, it works for other models, I don't know what else.
I'll share the results when I get the new one.Question though. I have a different model case, the megadrive case. How do I get the fan inside to stop being so noisy? It is like it is being pressed down on, and I've tried loosening the screws. Is there any tip or trick one could advise?
-
@Efriim small fans are inherently noisy best thing you can do is get something that controls when the fan turns on. Something like this for example https://mini-mods.com/2018/12/29/setup-your-retroflag-megapi-case-with-fan-control-board/
-
@quicksilver
It isn't its normal function, something presses down on it and it rattles. If I shake it a little bit sometimes it will set right.I do like that fan controller though. It would be able to shutdown the fan on OS poweroff.
Oh yes, and an obligatory, always remember to remove the sdcard when disassembling and assembling a case.
-
@Efriim does it make the same noise if the case is left open? Or just when you screw it back together? Maybe you need a thinner fan.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.