Suggestions for ports

retropi19

tpo1990 do you happen to know how many are the systems/games you can put on a pi-zero until it starts to loosing it? (lagging,no loading,crashing etc) what is the limit?

tpo1990

@retropi19 I cannot say as i don't own a Pi Zero, but i would think that the hardware specifications on the Pi Zero will show the limit as to what games runs smooth or not.

You can see it when comparing ex. Pi 3B with a Pi Zero where it is known that a Pi Zero will not be able to run PSX games like the Pi 3B will. I know for infact that i reached the limit with trying to run Aliens versus Predator
1999 after i was able to compile and make it working. It was really slow like 1-5 fps max which i suspect the opengl renderer for.

retropi19

pi zero can run really good psx games with the pcsx rearmed emulator not the lr one the other one,i was trying in the berryboot image of retropie for zero that apparently is problematic compared to the normal version that the bugs simply are not there.

Darksavior

@retropi19 A zero has to use inferior/older emulators so the overall experience will generally not be great. For me anyways.

tpo1990

@retropi19 That is something I was not aware of. I have also tried out berryboot earlier on my Pi 3B. While it did work it just was not a great experience as something seemed to be missing in the berryboot image of RetroPie. I have ever since moved away from it and been using PINN. PINN is an enhanced NOOBS bootloader. It works really good and it suit my needs.

Keep in mind that most compiling on Linux is trial and error. You just got to try it out and see if it works or not. :-)

retropi19

pinns is nice but the images/OS are huge in size so far i dont have problems with the berryboot image for rpi3,

Did you ported any other game ?

any luck with captain claw? do you have any instructions that work?

tpo1990

@retropi19 i didn't notice the images/OS file size since i'm using a 64 gb micro sd card.

I haven't ported or gotten any other source port to work since the summer season earlier this year.

I was only lucky once to get Captain Claw compiled and built into a working binary that you could run directly from the CLI Command Line or Framebuffer mode. I did try it again but failed to compile. I might do it some time again.

Keep in mind that the sourceport OpenClaw runs but not completely smooth. It does in fact seem that we could get it to work with being able to start it up from the Ports section in Emulationstation.

retropi19

@tpo1990 can you create a script module for captain claw and put it in your github page?

tpo1990

@retropi19 Only if i can get it to compile into a working binary that we can run. I won't release anything that doesn't work unless it has a specific purpose.

retropi19

@tpo1990 did you tried it in raspbian buster?

tpo1990

@retropi19 No not yet as my Pi3B is running official RetroPie with Stretch. I'm mostly aimed at getting the ports to work on official stable releases.

retropi19

@tpo1990 you can just try it only to see if it works

a lot of things run faster in buster eg retropie loads faster

ExarKunIv

just wanted share this

@Cesarpuig posted this the other day
to get Half-life on RetroPie

https://github.com/sergiopoverony/xash3d

and it does work, may not be perfect, but for the most part it is playable

Cesarpuig

It is true :)
Some glithe but playable
when I am at home I upload my settings

tpo1990

@retropi19 That sounds promising but at the moment i'm not seeing the need to try it out yet.

@Cesarpuig Cool. It is probably just a matter of time when it gets optimized enough to be able to have a stable release for RPI. It may even run better on a RPI 4B.

retropi19

@tpo1990 can you create a scriptmodule for log2ram for retropie

https://mcuoneclipse.com/2019/04/01/log2ram-extending-sd-card-lifetime-for-raspberry-pi-lorawan-gateway/

it seems it extends mem card life

tpo1990

@retropi19 I only create scriptmodules for working ports after i have tested them. This log2ram probably need some testing and benchmarking to see how it performs and work on a RPI. Since my time is limited i cannot do this. Maybe someone else can.

retropi19

its working fine tested with retropie

also this: https://www.raspberrypi.org/forums/viewtopic.php?t=252254

Cesarpuig

@ExarKunIv @tpo1990
I run xash3d at a resolution of 800x600 from runcomand and from the video mode options of the Half-Life menu.

I have also configured from the Half-Lihe video options menu:

Bump-mapping Off

Use VBO Off

Draw simple sky On

Allow Materials Off

And edited file \opt\retropie\ports\xash3d\Xash3D.sh to disable console:

LD_LIBRARY_PATH=/home/pi/RetroPie/roms/ports/Half-Life /home/pi/RetroPie/roms/ports/Half-Life/xash3d -clientlib cl_dlls/client.so -dll dlls/hl.so

And I have installed the extras fron there:

https://github.com/FWGS/xash-extras.git

Run fine for me, in a RPI3B whit overclock.

Sorry for my English

tpo1990

@Cesarpuig Great work, I need to test it out as well. I think your configuration will do it nicely.

I just received my Raspberry Pi 4B with 4 gb ram from Black Friday. Now the testing on a RPI4B can begin. :-)

If Xash3D runs well on your RPI3B with overclock. Did you try to run it without overclock to see how it perform?