N64 Remapping for every game

BlackDice

Hello i use innext n64 controller at my retropie these are any china controller from amazon.

In the Retropie menu the controller works perfectly with the button layout. But in the individual N64 games, for example, the a and b keys are reversed. The C buttons do not work at all. Is it possible for the individual games to create their own button layout?

Then I have a question how the storage works. I read that you should use the keys select and right shoulder. Unfortunately this does not work. For select I took the Z key on the N64 controller.

best regards
BlackDice from Germany

mitu

Can you please add more info about your system, as requested in https://retropie.org.uk/forum/topic/3/read-this-first ?

BlackDice

Ohh sorry,

It's a Raspberry Pi 3 B+ with Retropie 4.4 and N64 Controller from amazon.

mitu

@BlackDice You didn't give any details about your system, as asked in https://retropie.org.uk/forum/topic/3/read-this-first - what emulator, RetroPie release, etc. Please add the info asked on the page.

BlackDice

Pi Model or other hardware: Raspberry Pi 3 B+
Power Supply used: Amazon Basic 2,4A
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.4
Built From: Retropie Image from Retropie.co.uk with ApplePi-Baker on SanDisk SD 32GB Card
USB Devices connected: 2x Innext N64 Controller
Controller used: 2x Innext N64 Controller
Error messages received: -
Log found in /dev/shm/runcommand.log (if relevant): i don't know
Guide used: https://maker-tutorials.com/raspberry-pi-retropie-installieren-und-retro-spiele-spielen/
File: no file issue
Emulator: Mupen64Plus
Attachment of config files: it is a general question
How to replicate the problem: is a general question

edmaul69

@BlackDice you need to change the z to left bumper. (Or is it left trigger?) the c buttons need to be programmed as the right analog stick directions. The left and down c buttons might be programmed to x and a while n64 a and b are programmed to y and b

BlackDice

ok but now i have the problem that the a and the b buttons are inverted in the games.

mitu

@BlackDice You can change the mappings in the InputAutoCfg.ini file from the Mupen64 configuration file, switching A and B button codes. See the docs page on the emulator configurations.

BlackDice

ok i tried it. This is my config. But it didnt work. my idea for the select Button is to push the eft and right shoulder button at the same time

DPad U = hat(0 Up)
DPad D = hat(0 Down)
DPad L = hat(0 Left)
DPad R = hat(0 Right)
Start = button(9)
Z Trig = button(7)
A Button = button(6)
B Button = button(8)
C Button U = button(0)
C Button D = button(2)
C Button L = button(3)
C Button R = button(1)
Y Axis = axis(1-,1+)
X Axis = axis(0-,0+)
R Trig = button(5)
L Trig = button(4)
Select = button(4) button(5)