2 Pi4 questions

bc320

To start with I know this is a work in progress. I am not sure if these issues are because I am being dumb (very well could be) or because they are not available yet in the build version that works on the Pi4.

Splash screens. When I try to select any, it says the module is not installed. I try to access through emulation station and when I click on it it say s the module is not installed.
I can't seem to have an external usb drive recognized. I was able to get file manger up, but it would not mount and see the USB drive. the drive is formatted in fat32.

Darksavior

@bc320 You can install the usbromservice from retropie-setup so drives can be recognized.

For splashscreens, you have to install splashscreen from retropie-setup as well. It won't pop up until you edit the splashscreen script and delete !kms from the script. Though, when I last tried it, it worked, but it slowed down ES to a crawl. Uninstalling it made ES work correctly again. I don't believe it's ready and I can live without a splashscreen.

bc320

the usb is way more important. I will try that and live with boot text. thanks

bc320

@Darksavior said in 2 Pi4 questions:

usbromservice

I tried to install in the following way:
Retropie Setup > Manage packages > Optional packages

Then I get the following error
Could not install package(s): ntfs-3g exfat pmount lockfile progs

I do not have the HDD attached yet. I already have a HDD formated in NTFS I want to use that contains ROMS. This is a 2TB drive. Once Kodi gets working on the Pi 4 I plan on using my 5TB drive and it will have some files that are larger then 4gb so formatting in Fat32 is not an option, nor is a complete reformat.

Clyde

@bc320 said in 2 Pi4 questions:

Then I get the following error
Could not install package(s): ntfs-3g exfat pmount lockfile progs

There are no packages named exfat, lockfile, and progs in the Retropie repositories. Did you copy & paste the error into your forum post or typed it in? If possible, it's better to copy errors to avoid typing errors.

There are packages named exfat-fuse, exfat-utils, and lockfile-progs however. Assuming these are the missing ones, you can install them and the others with this command:

sudo apt install ntfs-3g exfat-fuse exfat-utils pmount lockfile-progs

Maybe you can install usbromservice via the Retropie Setup after that.

Darksavior

@Clyde Odd, usbromservice installed without issues. I use raspbian lite buster and cloned the retropie pi4 branch repo but yea, if a dependency is missing...then install it

burt111

to use splashscreens go to RetroPie-Setup/scriptmodules/supplementary/splashscreen.sh with a text editor and remove everything in rp_module_flags but keep the quotes then it should appear in the setup script for you to install

KN4THX

I just installed usbromservice on my Pi 4 for this branch but upon reboot it says usbromservice cannot be started.

EDIT: Apparently the Retropie folder wasn't copying over. Got it to copy over by unplugging the drive, rebooting and making sure error disappeared, and then plugging in the ssd and giving it a minute. Restarted ES and the systems were detected that were on the SSD from the Pi 3. I forgot I deleted all folders except for the roms and BIOS in order to let the new Pi 4 scripts build a compatible Retropie folder.

bc320

@Clyde
I ran the code you said then repeated my install attempt. Got the same result. A black screen with a lot of text popping up then back to the set up screen with the following note (I double checked before I submitted)

Could not install package(s): ntfs-3g exfat-fuse pmount lockfile-progs.
next page:
please see
/home/pi/retropie-setup/logs/rps_2019-09-19_021621.log.gz for more in depth information regarding the errors.

I then went back to the main screen, plugged in a USB Drive with a folder named retropie-mount and rebooted to see if anything would happen. Nothing did. USB drive is still not seen by retropie nor are the folders and roms moved over.

I wonder if it is an issue with the branch and wonder if it is known. Or, more likely, I am messing something up.

Clyde

@bc320 What does my command say if you run it now? (Please copy the complete output.) If it worked before, it should now say that these packages are already installed. If so, it would be very strange that the installer says that it can't install them.

bc320

I was able to get it installed. I ran your code again. This time it said something along the lines of run "apt --fix install" or something.
I can get the File Manager to see the USB drive. I have yet to try to get the roms to be located on the drive but I think that is just a matter of time.

bc320

I am able to see my USB drive in the File Manager, however, I cannot transfer anything to or from it. Whenever I try I get an error that says it is read only. I tried via the terminal as well using
"sudo mv -v /home/pi/RetroPie/* /media/usb0/"

I keep googling it but I can't find a solution. I keep running into SD cards being stuck in read only or how to run the system as read only.

I can using my windows pc to read/write to the drive.

This is a 2TB External Seagate HDD formatted as NTFS

Clyde

@bc320 Please give us the exact output you got from mv, in addition to the output of this command when the drive is mounted:

mount | grep usb0

bc320

So far here is what I have done and the results.

Reformatted drive completely in NTFS format
Enabled USBROMSERVICES
Plugged in drive
Drive was found in media manger but when trying to transfer from SDCard to drive get the following error
“Cannot create target file: “media/usb1/ret~t/es_input.cfg” Read-only file system (30)
Rebooted Pi
Same result
Disabled USBROMSERVICES
Attempted to use
“Sudo mv –v /home/pi/RetrpPie/* /media/usb0”
And received following errors
“mv: inter-device move failed: ‘/home pi/retropie/BIOS’ to /media/usb/BIOS’ ; unable to remove target: Read-Only file system"
“mv: inter-device move failed: ‘/home pi/retropie/retropiemenu’ to /media/usb/retropiemenu’ ; unable to remove target: Read-Only file system"
“mv: inter-device move failed: ‘/home pi/retropie/roms’ to /media/usb/roms’ ; unable to remove target: Read-Only file system"
Entered
“mount | grep usb0”
Got this
“/dev/sda2 on /media/usb0 type ntfs (ro,nodev,noexec,noatime,nodiratime,sync,uid=1000,fmask=0177,dmask=077,nls=utf8.errors=continue,mft_zone_multiplier=1)
Tried 7 above again and got the same result

mitu

My guess is you're using the Raspbian Desktop edition for your OS and it automatically mounts any removable drives you add. In this particular case, the drive is mounted read-only, hence the errors.

bc320

I installed Raspbian lite followed by the daily build for the Pi4

bc320

If the OS is the reason, how do I fix?

mitu

@bc320 OS is not the reason - are you sure you've installed the necessary dependencies - namely ntfg-3g ?

bc320

yes.
I ran "sudo apt install ntfs-3g exfat-fuse exfat-utils pmount lockfile-progs" and got an error about the about it not working and I have to run apt---fix install. Then it worked

bc320

I ran that command again. A bunch of stuff installed. but still read only