Is Yabasanshiro emulator coming on retropie?
-
@mechafatnick any luck? I'm having the same issue, even after following @grant2258 's recommendations to the letter.
-
@roslof you having problems compiling or using the binary?
-
@grant2258 having trouble compiling, even after installing the libraries you listed above. Getting:
CMake Error at src/qt/CMakeLists.txt:27 (find_package): By not providing "FindQt5WebEngineWidgets.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5WebEngineWidgets", but CMake did not find one. Could not find a package configuration file provided by "Qt5WebEngineWidgets" with any of the following names: Qt5WebEngineWidgetsConfig.cmake qt5webenginewidgets-config.cmake Add the installation prefix of "Qt5WebEngineWidgets" to CMAKE_PREFIX_PATH or set "Qt5WebEngineWidgets_DIR" to a directory containing one of the above files. If "Qt5WebEngineWidgets" provides a separate development package or SDK, be sure it has been installed.
I'm only a little smarter than stupid, so was planning to try running the executable posted by myzar a bit later, along w/his sample config.
-
@roslof i assume youve done all this
sudo apt install git cmake qtbase5-dev qtmultimedia5-dev libqt5opengl5-dev libopenal-dev libsdl2-dev git clone https://github.com/devmiyax/yabause.git cd yabause git clone https://github.com/firebase/firebase-cpp-sdk.git -b v6.11.0 yabause/src/qt/firebase-cpp-sdk mkdir build cd build cmake -DYAB_PORTS=qt ../yabause
what i need you to do is goto cd yabuse where ever you cloned it
rm .gitignore git clean -Xfd git clone https://github.com/firebase/firebase-cpp-sdk.git -b v6.11.0 yabause/src/qt/firebase-cpp-sdk mkdir build cd build cmake -DYAB_PORTS=qt ../yabause
edit changed this up a little due to the git ignore so all build directories clear as well
-
@roslof said in Is Yabasanshiro emulator coming on retropie?:
@grant2258 having trouble compiling, even after installing the libraries you listed above. Getting:
CMake Error at src/qt/CMakeLists.txt:27 (find_package): By not providing "FindQt5WebEngineWidgets.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5WebEngineWidgets", but CMake did not find one. Could not find a package configuration file provided by "Qt5WebEngineWidgets" with any of the following names: Qt5WebEngineWidgetsConfig.cmake qt5webenginewidgets-config.cmake Add the installation prefix of "Qt5WebEngineWidgets" to CMAKE_PREFIX_PATH or set "Qt5WebEngineWidgets_DIR" to a directory containing one of the above files. If "Qt5WebEngineWidgets" provides a separate development package or SDK, be sure it has been installed.
I'm only a little smarter than stupid, so was planning to try running the executable posted by myzar a bit later, along w/his sample config.
I had to switch to the standard buster repo to install that dep i cursed it alot
-
@myzar is it not on the repo ? I need to grab a pi4 at some point.
-
@myzar I'm glad it wasn't me! Thought I was Going mad :D
I couldn't get it to compile (probably because I needed to change repo!) but I managed to get the binary up and running. Thanks guys!
-
@mechafatnick would you mind sharing the steps to setup run the binary?
-
@roslof I downloaded the binary Myzar kindly compiled: https://retropie.org.uk/forum/post/223836
Then added his run command to the saturn emulators.cfg:
-
@myzar There is also the build option based on https://github.com/devmiyax/yabause/tree/master/yabause/src/retro_arena with minimalistic ui (no qt required).
-
@barbudreadmon That should indeed work but, alas, from a few (incompetent) tries on my end and a few others we always hit an "unable to create EGL surface" message on launch. Fairly sure it's a compiler flag thing, but alas never managed to move past that.
Folks using xinit: you may want to create a file in
/usr/share/X11/xorg.conf.d/
named, for instance,10-monitors.conf
(or add to it) the following:Section "Monitor" Identifier "Monitor0" Option "DPMS" "false" EndSection Section "ServerFlags" Option "BlankTime" "0" Option "StandbyTime" "0" Option "SuspendTime" "0" Option "OffTime" "0" EndSection Section "ServerLayout" Identifier "ServerLayout0" Option "StandbyTime" "0" Option "SuspendTime" "0" Option "OffTime" "0" Option "BlankTime" "0" EndSection
At least on my end the screen would always turn off after 10 mins, when the X power saving features hit. This should disable them - and there are probably unnecessary flags there as well.
-
@barbudreadmon said in Is Yabasanshiro emulator coming on retropie?:
@myzar There is also the build option based on https://github.com/devmiyax/yabause/tree/master/yabause/src/retro_arena with minimalistic ui (no qt required).
I've tried but it doesn't start i get
Fail to SDL_GL_CreateContext Bye! (Could not create EGL context (call to eglCreateContext failed, reporting an error of EGL_BAD_MATCH))
maybe because it's for xu4 not sure i'm not skilled enough :(
-
anyone can figure out how to hack the source to quit with a button rather than with a key ? I looked in the source but i can't find where is comparing with the keyevent , qt is also alien for me, i did that for the sega model 3 emu but i'm bashing my head without luck with yaba
-
@myzar said in Is Yabasanshiro emulator coming on retropie?:
@barbudreadmon said in Is Yabasanshiro emulator coming on retropie?:
@myzar There is also the build option based on https://github.com/devmiyax/yabause/tree/master/yabause/src/retro_arena with minimalistic ui (no qt required).
I've tried but it doesn't start i get
Fail to SDL_GL_CreateContext Bye! (Could not create EGL context (call to eglCreateContext failed, reporting an error of EGL_BAD_MATCH))
maybe because it's for xu4 not sure i'm not skilled enough :(
if your using the pc.cmake comment out set (USE_EGL True) or unset it from your command line. I had to update nanovg as well
-
@steeeb said in Is Yabasanshiro emulator coming on retropie?:
Also, Retro Arena paid devmiyax to port it to the XU4
Surely we could pool enough money to pay him too? Indigogo or something? Seems reasonable that he would want to be paid for his time.
-
@grant2258 said in Is Yabasanshiro emulator coming on retropie?:
@myzar said in Is Yabasanshiro emulator coming on retropie?:
@barbudreadmon said in Is Yabasanshiro emulator coming on retropie?:
@myzar There is also the build option based on https://github.com/devmiyax/yabause/tree/master/yabause/src/retro_arena with minimalistic ui (no qt required).
I've tried but it doesn't start i get
Fail to SDL_GL_CreateContext Bye! (Could not create EGL context (call to eglCreateContext failed, reporting an error of EGL_BAD_MATCH))
maybe because it's for xu4 not sure i'm not skilled enough :(
if your using the pc.cmake comment out set (USE_EGL True) or unset it from your command line. I had to update nanovg as well
I've tried without and i get a gl error GlxBadFBConfig , but this still uses xorg just not qt , so i don't think it's worth to waste more time with it
-
@myzar would need a pi4 to test stuff to be honest not sure how all the gl is setup pi4 end will look at it if i ever get one!
fwiw this is what the default behavior is set too
option(YAB_FORCE_GLES20 "force to use OpenGLES 2.0" ON)
if (YAB_FORCE_GLES20)
set(GLSystem "OpenGL ES 2.0")
else(YAB_FORCE_GLES20)
set(GLSystem "Desktop OpenGL")
endif(YAB_FORCE_GLES20) -
I tried the prebuilt 64bit yabause qt that you can get on the 64bit version of the pi os. 1950Mhz overclock. Sega rally. 45-50fps when racing.
lr-yabasanshiro on retropie = 30-40fps when racing.
I didn't try the 32bit version (if available) from the 32bit version of the pi os.Is 64bit being looked into for retropie?
-
@Darksavior did you try the current 32-bit binary and compare? I'd be keen on seeing Mame performance on 64-bit though.
-
@pjft No, it wasn't available in the pi os repo.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.