RP4 on 15kHz arcade cabinet : how to properly set TATE games resolution?

mitu

tvservice doesn't function correctly on a Pi4 - since it use a new set of drivers and tvservice doesn't know about the DRM/KMS layer.

Nevohteeb

Well, I indeed read that somewhere, but what I do not understand is that if I just write the aforementioned script under another name, let's say "set_video.sh", I actually see the image changing, which makes me think the resolution changed.

Then, is there another way to modify the resolution on the fly ?

mitu

@Nevohteeb said in RP4 on 15kHz arcade cabinet : how to properly set TATE games resolution?:

Then, is there another way to modify the resolution on the fly ?

AFAIK, only if you're running under X and using xrandr to create new resolutions and change them on the fly. Not sure you'll get 100% the same functionality as tvservice offered on previous Pi models.

Nevohteeb

@mitu said in RP4 on 15kHz arcade cabinet : how to properly set TATE games resolution?:

tvservice doesn't function correctly on a Pi4 - since it use a new set of drivers and tvservice doesn't know about the DRM/KMS layer.

Just one question about that: if tvsercice does not work on RPI 4, why is it mentioned in the documentation here : https://www.raspberrypi.org/documentation/configuration/hdmi-config.md

Even for RPI 4.

mitu

@Nevohteeb tvservice still works when you're not using the v3d KMS/DRM driver, but then you'll loose all the 3D/GL functionality - not a very usable system for RetroPie and the emulators included.
Maybe the documentation needs updated to specify the Pi4 limitations for tvservice.

Nevohteeb

Ok, well, thx. :)
I guess I should downgrade to RPI 3 then.

Nevohteeb

@mitu said in RP4 on 15kHz arcade cabinet : how to properly set TATE games resolution?:

tvservice doesn't function correctly on a Pi4 - since it use a new set of drivers and tvservice doesn't know about the DRM/KMS layer.

I installed retropie on a RPI3 and I still have the same message.

[E] Failed to power on HDMI with explicit settings (DMT mode 87)

mitu

@Nevohteeb You'll have to provide the complete command that gives this error - maybe the video mode you're trying to set is not correct ?

Nevohteeb

@mitu

Hi mitu,

it happens when i do:

vcgencmd hdmi_timings 320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1                                                                                                                                    
tvservice -e "DMT 87"

Actually, the hdmi_timings are good. The problematic part is the tvservice one.

mitu

From the looks of it, tvservice may be trying to power on the actual HDMI port. Do you have configured the PI to output to GPIO by default ?

enable_dpi_lcd=1
display_default_lcd=1

Nevohteeb

This is the results of vcgencmd get_config int.
enable_dpi_lcd and display_default_lcd are set to 1.

arm_freq=1500
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_audio_dither=1
disable_commandline_tags=2
disable_l2cache=1
display_default_lcd=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dpi_group=2
dpi_mode=87
enable_dpi_lcd=1
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
mask_gpu_interrupt0=1024
mask_gpu_interrupt1=0x10000
max_framebuffers=2
over_voltage_avs=-23750
overscan_scale=1
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_ignore_edid_audio:0=1
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300