I.K.E.M.E.N GO on Raspberry Pi 4 [Now with an Install Guide!]

joamjoamjoam

The crt does look pretty cool lol. Glad to hear the full screen on hdmi works. The problem with matchbox is that when Ikemen opens the window it doesn’t specify a location it just asks for a certain sized widow. So it’s up to whatever the X server defaults to when creating a new window it could be easily fixed by specifying a location like always start on top left etc in the source.

It looks like we finally have a working Ikemen implementation for RetroPie. Good job everyone!

SuperFromND

@joamjoamjoam Huzzah indeed! 🎉

All that's left is to test my current scriptmodule on a fresh RetroPie install to verify that it does indeed work properly, and then I guess it'll be it'll be time to submit it to RetroPie! Or maybe I should post the script here and ask for people to test it themselves for a day or two before submitting?

Let me know, what do you guys think I should do?

ADDENDUM: I just installed a fresh copy of RetroPie on an SD card, no fancy USB mounting or anything, and ran the script and... it works! Although I did have to add one more chown since the files were being copied with root as the owner and 644 permissions, meaning the user couldn't edit them.

# Recursively set all files in the ports folder to be owned by the user, so that they can be edited (which is pretty important in a highly customizable game engine)
chown -R $user:$user "$romdir/ports/ikemen-go/."

Took about 30 minutes to install from the scriptmodule, but once it did, it booted without any other hassle. Cue sigh of relief.

joamjoamjoam

@superfromnd nice i would say submit it. i also ran it from a fresh install and only hit these permission errors. so since they are ironed out i say lets do it. If you post you the full script here ill run it one more again to test it out.

SuperFromND

@joamjoamjoam Alrighty, here's the script:

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="ikemen-go"
rp_module_desc="I.K.E.M.E.N GO - Clone of M.U.G.E.N to the Go programming language"
rp_module_licence="MIT https://raw.githubusercontent.com/Windblade-GR01/Ikemen-GO/master/License.txt"
rp_module_help="Copy characters, stages, screenpacks, etc. to $romdir/ports/ikemen-go\n\nConfig.json can be found at $configdir/ports/ikemen-go/save"
rp_module_section="exp"

function depends_ikemen-go() {
    getDepends golang-go libgl1-mesa-dev xinit xorg xorg-dev libopenal1 libopenal-dev libgtk-3-dev libasound2-dev freeglut3-dev
}

function sources_ikemen-go() {
    gitPullOrClone "$md_build" https://github.com/Windblade-GR01/Ikemen-GO.git
}

function build_ikemen-go() {
    go clean
    go mod tidy
    make TAGS='-tags al_cmpt' linux
    # grabs default screenpack and content required for the game to run; note that the screenpack has a CC-BY-NC 3.0 license
    make elecbyte
    md_ret_require="$md_build/Ikemen_GO"
}

function install_ikemen-go() {
    cp 'elecbyte/LICENCE.txt' 'ScreenpackLicense.txt'
    mkdir save sound

    md_ret_files=(
        'Ikemen_GO'
        'License.txt'
        'ScreenpackLicense.txt'
        'data'
        'save'
        'sound'
        'font'
        'external'
        'elecbyte/chars'
        'elecbyte/stages'
        'elecbyte/data'
        'elecbyte/font'
    )
}

function configure_ikemen-go() {
    mkRomDir "ports/ikemen-go"
    addPort "$md_id" "ikemen-go" "I.K.E.M.E.N GO" "XINIT:$md_inst/ikemen-go.sh"

    moveConfigDir "$md_inst/chars" "$romdir/ports/ikemen-go/chars"
    moveConfigDir "$md_inst/stages" "$romdir/ports/ikemen-go/stages"
    moveConfigDir "$md_inst/data" "$romdir/ports/ikemen-go/data"
    moveConfigDir "$md_inst/external" "$romdir/ports/ikemen-go/external"
    moveConfigDir "$md_inst/font" "$romdir/ports/ikemen-go/font"
    moveConfigDir "$md_inst/sound" "$romdir/ports/ikemen-go/sound"
    moveConfigDir "$md_inst/save" "$configdir/ports/ikemen-go/save"

    cat >"$md_inst/ikemen-go.sh" << _EOF_
#!/bin/bash
export MESA_GL_VERSION_OVERRIDE=2.1
xterm -g 1x1+0+0 -e 'cd $md_inst && ./Ikemen_GO'
_EOF_
    chmod +x "$md_inst/ikemen-go.sh"
    chown -R $user:$user "$md_inst"
    chown -R $user:$user "$romdir/ports/ikemen-go/."
    chown -R $user:$user "$configdir/ports/ikemen-go/save"
}

joamjoamjoam

@superfromnd

Worked for me with no permission changes on a fresh install.

SuperFromND

@joamjoamjoam Awesome! I just submitted the PR:
https://github.com/RetroPie/RetroPie-Setup/pull/3384

duiz

@joamjoamjoam Amazing! Does this allow multiple MUGEN games to be installed or is it one game only per now? Basically wondering if it generates a game list like emulators do or not.

SuperFromND

@duiz Right now, with how the file structure is set up, it just deals with one game for the sake of simplicity.

Theoretically it should be possible to set it up in a way to allow multiple MUGEN fullgames to be installed at once (as really all you need to do is point to different system.def files, which handle the selectable character/stages and screenpack from there; you can do this in IKEMEN via Ikemen_GO -m foo/bar/system.def and it shouldn't be too hard to modify the script to pass a specific system.def as an argument), but for now it's just the one.

duiz

@superfromnd This sounds really exciting! I'll hold off on trying it until it is a bit more complete but I love the work you been doing! This is like a dream come true.

BuZz

@superfromnd Thanks for this. I have done a quick review only so far but appreciate the contribution.

SuperFromND

Good news for composite-out/CRT people like me! I figured out how to make IKEMEN GO center itself in windowed mode, and thus display properly on CRT without an overscan hack!

Jools gave the scriptmodule a quick review and informed me of a few things that needed to be rectified, and one of them was the removal of a few unnecessary dependencies that were rendered redundant by their -dev package variants.

Well, it turns out that the binaries installed by apt-get install xorg were the cause of IKEMEN GO not centering itself! Simply removing the package was all it took to fix it, and now it displays at the proper size on CRT (which looks pretty awesome and elegaic when you turn off all the other lights, by the way):
crt fixed.png

SuperFromND

Progress report on the RetroPie submission: The review noted a few things that needed to change in the script. Most of it was relatively easy stuff, like using the git_module_repo system and some minor re-ordering of commands. The one that's proven to be more difficult is minimizing the number of dependencies that are installed. Here's a quick re-cap of those:

golang-go: Required; this is the language IKEMEN GO is written in.
libgl1-mesa-dev: Required; Go-GLFW dependency.
xinit: Required; this launches the X server for displaying the game.
xorg: See below.
xorg-dev: See below.
libopenal1: Not required; libopenal-dev makes this redundant.
libopenal-dev: Required; Go-GLFW dependency.
libgtk-3-dev: Unsure. Originally added due to errors early on in this project.
libasound2-dev: Required; Go-GLFW dependency.
freeglut3-dev: Not required. Originally added due to errors early on in this project.

The two that have proven to be the most contentious are xorg and xorg-dev. xorg-dev is a dependency for Go-GLFW, and theoretically xorg is unnecessary... right? Well, no, because if you exclude it in the scriptmodule, Xinit crashes due to not being able to find X:

Parameters: 
Executing: xinit /dev/shm/retropie_xinitrc -- vt1 -keeptty

xinit: unable to run server "X": No such file or directory
Use the -- option, or make sure that /usr/bin is in your path and
that "X" is a program or a link to the right type of server
for your display.  Possible server names include:

    Xorg        Common X server for most displays
    Xvfb        Virtual frame buffer
    Xfake       kdrive-based virtual frame buffer
    Xnest       X server nested in a window on another X server
    Xephyr      kdrive-based nested X server
    Xvnc        X server accessed over VNC's RFB protocol
    Xdmx        Distributed Multi-head X server

xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

So by process of elimination, xorg-dev is the one that would need to be removed and xorg by itself is good. Mystery solved... right? Well, no, because if you have just xorg installed, then IKEMEN GO can start correctly... ~~until a K.O. is achieved, which causes IKEMEN GO to crash with an error like this:~~

./external/script/randomtest.lua:257: ./external/script/start.lua:1251: __len undefined
stack traceback:
	./external/script/start.lua:1251: in function 'f_turnsRecovery'
	./external/script/global.lua:239: in function 'loop'
	<string>:1: in function <<string>:0>
	[G]: in function 'game'
	./external/script/randomtest.lua:257: in function 'f'
	external/script/main.lua:2992: in function 'loop'
	external/script/main.lua:3076: in function 'loop'
	external/script/main.lua:4051: in main chunk
	[G]: ?
stack traceback:
	[G]: in function 'game'
	./external/script/randomtest.lua:257: in function 'f'
	external/script/main.lua:2992: in function 'loop'
	external/script/main.lua:3076: in function 'loop'
	external/script/main.lua:4051: in main chunk
	[G]: ?

It seems as if xorg-dev isn't installing certain packages that xorg is, but at the same time xorg isn't installing something that's causing IKEMEN GO builds to be a little screwy as a result. Installing both does seem to fix the problem, but I imagine that's not ideal for RetroPie's maintainers.~

There's also the possibility the real cause is something less severe; these changes were made at the same time as some directory-creation and permission changes, so it's completely possible that IKEMEN GO just isn't able to read or write something and that's causing it to go kerpoot somehow.

ADDENDUM: Scratch all that, turns out I was just being a tad paranoid; this doesn't seem to be a bug with the libraries, and xorg on it's own is sufficient after all. My reasoning: there's a consistent way of reproducing this crash, and there's a consistent way to fix it too:

Starting up IKEMEN GO and going straight into Random Test causes the crash, but going into any other mode first and then Random Test averts the crash. I've actually seen this exact behavior when trying to make my own LUA addons before, so it's possible this is a bug on IKEMEN's side and not on the Pi specifically. Crisis averted.

ADDENDUM 2: This was indeed a bug on IKEMEN's side, and one of the devs fixed it once I posted about it. That's a relief.

duiz

@superfromnd Amazing to see such rapid progress on this. This might be the most exciting addition to RetroPie IMO.

joamjoamjoam

@superfromnd

Sweet looks good. I'm curious as to what the issue was so ill cruise by the Github and check it out.

Out of curiosity how does the Retropie/Script pack process go. Do you submit it to them for addition to the experimental packages??

SuperFromND

@joamjoamjoam Correct! You create a scriptmodule and then PR it to the RetroPie/RetroPie-Setup Github for approval. If it's merged, it's added.

The randomtest fix was apparently this.

joamjoamjoam

@superfromnd oh nice seems like it was completely unrelated a to a CRT or fullscreen then. Sweet let me know if there is anything else I can help out with to help make this a reality.

Side Note: I did find another bug on the pi side only where the command list for the characters is drawing some random white triangles when you try to view it. I might take a look at it this weekend. If i can confirm it ill post an issue in github to track the progress. Its most likely another difference in precision thing.

SuperFromND

@joamjoamjoam Oh actually, that command-list text bug isn't Pi-specific! Some AMD cards were getting that on IKEMEN on PC as well; it's apparently supposed to be fixed when the next version of IKEMEN is released (v0.98, sometime either this week or next week). No idea if that fix will also apply to the Pi though, so I guess we'll have to wait and see.

joamjoamjoam

@superfromnd oh that’s good to hear. The command list of probably my favorite Ikemen feature over the regular mugen cause I always forget the inputs.

Troopaking

@superfromnd
Hello again so as you've seen we made decent progress with mugem through box86 i think performance with mugen/ikemen will be better with ikemen go . Due to pi accepting go language better than comping and running through wine.
I see you made some changes to stuff since my last comment.
I will be trying to reinstall your scripts this evening to see if it works for me .

Should I use your retropie scripts and then do fixes discussed or have to updated the scripts fixes not needed?

SuperFromND

@troopaking The scripts alone should work just fine (at least the one over on the PR I've submitted).