Box86 and Wine on RPi4

shavecat

Hello again ,
So i update the box86 & wine
thought it will help running CLAW (i dont wanna the openclaw but it does works prefect i wanna the movies and the music too)
/ AOE2 / jazz 2 / couple more i guess.
some games in the wine desktop with wine give me like a new screen and goes back to the wine desktop ( like claw & jazz 2).
Heroes of might and magic 3 still getting stuck after a few min' playing .
Still no luck :(((
I do have the pinball working and commandos 1 + 2 so something is good :)

ecto

Hi fellow gamers!
Upfront I must admit, that I haven't dived into the whole "Windows emulation" so far, but I have been reading this topic on and of just out of curiosity.

Now with the whole Sega Model 3 emulation on RPi4 I came up with an idea and wanted to ask you if it might work:

There is only one Sega Model 2 emulator (besides MAME, which is too demanding). It is closed source, hasn't goten an update since 2014 and only runs on windows.
Do you think it would be possible to get it to run on RPi4 with Wine or Box86? The emulator is supposed to be not too demanding (don't know, I haven't tried it yet). If that would work, the number of unplayable games on Retropie would be so much smaller!

Thanks for hearing me!

Troopaking

@ecto I don't understand question.
Mame is in retropie already why not use it ?
In theory it could run in wine/box86 .

I am working on getting wine to launch with a desktop installed. Currently no desktop can be installed with this script.

ecto

@troopaking Let me try to explain: It is true, that MAME can emulate some (not all by far) Model 2 games. But it only can so that in the latest releases, which are not feasible to run even on a Raspberry Pi 4.
The Model 2 Emulator OTOH can emulate almost the whole Library of Model 2 games but is restricted to Windows and is not in active development since 2014.

I was just asking myself (and hereby you guys) if it's possible to run the (Windows only) Model 2 Emulator using Box68 or Wine and if the RPi4 might be powerful enough to pull that off in any way? By that, a lot of previously unplayable games would become playable on a (ARM) Retropie.

George

@ecto It might be possible to run Model 2 Emulator, but since it's a relatively recent WIndows program, it might not run fast enough to be playable.

With regards to MAME, I found that the more recent versions of SDL show a major performance increase making some games that were not previously playable in the latest versions of MAME play quite nicely. Here's a post I did about that.

https://retropie.org.uk/forum/topic/28362/enhanced-performance-of-mamedev-mame-in-x11

Hope that helps.

- George

ecto

@george Thanks for your input. That's a very interesting topic! I have Dosbox (and Dosbox-Staging) run with XINITand have definitely performance gain from that, but I don't know the cause.
I will definitely look into Mame-dev at some point.

What equivalent of an Intel or AMD processor would you think the RPi4 can run using Wine or Box86?

Troopaking

@george
Ahoy again .
So I am testing with a desktop environment pixel installed now.
SUCCESS
What I did in this order
-install fresh retropie
-install lightdm and pixel
-followed my above "how to"

Gonna try and install pixel on other card I have full of mugens and your scripts loaded up.
Will be doing speeds before installing with same mugens and settings.
That way we have no desktop vs desktop installed test as well .
UpDATE
I installed pixel on sd with mugens and script . It stops some from launching and slowed all way down .
Same file on new sd card doesn't have that issue at all. I have pixel on new sd as well. Just installed before your scripts .

George

@ecto I can't really say what processor such as Intel or AMD would be equivalent of an RPI4. I think there are several variables. Whereby the ARM processor in the RPI4 might be as powerful as a processor from about 2005 (I get pretty good performance of some games from that time period), the GPU is probably more advanced than those of the era. I think that's part of the success of Box86 - emulate as little as possible, dynamically recompile what it can, push library calls to the native system, and use the power of the current GPU vs. trying to pipe things through software.

@Troopaking , speaking of piping things through software, on the platform that is slow, am I correct in understanding that Pixel was installed AFTER everything else. In a command line can you do:

dpkg -l | grep -i fbturbo

My suspicion is that the LLVM Pipe software renderer got installed again and it slows everything down.

- George

Troopaking

@george correct very slow when pixel installed after everything else . Thanks for possible solution .

I am testing on a few builds with desktops on em now . We will see what happens.
UPDATE
Worked on a full build with pixel installed.
Issues happened
skifree exited but didn't return to retropie menu . Just black screen o death
Didnt workon some displays .

Anyway to change the wine resolution to match the TV? In a arcade cabinet for example .

George

@troopaking I believe you may want to try changing the resolution of the desktop session before launching Wine, so that it matches the resolution that the game expects to be in. I don't think Wine / Box86 handles resolution changes very well just yet. In your script that launches the game, you could add a line for xrandr to set the resolution before launching wine, and then use it again to reset it back to the proper resolution.

- George

Troopaking

@george
Ahoy .
So I have had great success on many builds with mugen.
Only issue ive come across
-box86 error retropie has to be 4.7.1(or 4.7.something don't remeber exactly)
-if gpu memory is too low will not work.
-i can't get .sh to work at all . Testing now by copying winedesktop.sh and changing directories .

I am now working on launching joy2key on wine boot/same time as mugen/before mugen.
I have successfully installed it on wine installer and desktop mapped xbox controller great . Just need to start with wine now :)

George

@troopaking that GPU memory tip is good. I will have to try that if I ever have an issue with a game not running.

I wonder if perhaps you might need to do a chmod a+rx SCRIPTNAME.SH in order to make it work. You may have already done it, but worth checking.

- George

Troopaking

@george .
Hello so I can start the .sh fine but it won't open mugen.
Error "cant open mugen.cfg ". Seems .conf works better for me .
Also another person using scripts cant open .conf . Hes is sure he ran chmod+x on em.
Also for everyone reading this doesn't work on a 64 bit environment box86 is useless like that .

RussellB

@troopaking

I got the conf file method working by removing the "OPTIONS=**" from the file. It was causing a malformed command line to be passed to wine.

Troopaking

@russellb uh the .conf works fine for me with options in it.
Problem is .sh I can launch it bit it wont open mugen says error unable to open mugen.cfg.
Seems the .conf works better than .sh simpler I guess dont know for sure why

George

@troopaking said in Box86 and Wine on RPi4:

Also for everyone reading this doesn't work on a 64 bit environment box86 is useless like that .

True. ptitSeb did just release Box64, but vice versa that won't work on a 32 bit system. Plus you would need to use a 64 bit Wine, and that won't work with 32 bit applications, etc.

I'm puzzled by the error you are seeing (can't open mugen.cfg). If you have the same directory listed in the conf file and sh file then it should work the same. I also presume that mugen.cfg is in the same directory where the exe is. You might be able to do some additional debugging by inserting a couple of lines like this and see the log output matches your expectations:

pwd
ls -al

@RussellB if you had a line that said OPTIONS=** then that would likely throw some kind of error because * is the file wildcard.

Troopaking

@george
Yeah I'm puzzled as well. .conf works fine but not .sh same files same directories etc
.sh loads wine fine starts to open then says cant open mugen.cfg. with simpler games yo opens fine . Example skifree.sh plays fine.
.conf takes a min to load but works great. I have started in wine desktop same load time .
Maybe .conf is better than .sh ? I am unsure .

So I modified a few things for better playing experience .
Changes/modifications
-changed wine default to windows 8
-set pi gpu memory to 128. Tested vs 256, 128 gave me more frames per second.
-installed joy2key to map keyboard to controller. Controller preferred by some. Installed through wine config. Seems hard to launch same time with .conf as you said . But cant get .sh to work . So been looking into wine programs at boot. Hard to transfer to pi wine
-told wine that my pi has max video memory 1028 (I think), in winetricks .

George

@troopaking I guess other things you might be able to try are removing the cd command from the .sh file or setting it to the location of the Wine prefix (like /home/pi/.wine/drive_c/ or something).

Really appreciate the times on the GPU and max video memory. Those are going to be interesting to test out.

For joy2key, what you could try to do is edit the Wine Desktop.sh file and add the command you need. Maybe around line 80? I've never been able to get Wine to launch a Windows program when it starts up using any of the usual Windows methods, like Startup folder, etc. From my own investigation, it seems Wine doesn't utilize those standards.

- George

RussellB

@george said in Box86 and Wine on RPi4:

@troopaking said in Box86 and Wine on RPi4:

Also for everyone reading this doesn't work on a 64 bit environment box86 is useless like that .

True. ptitSeb did just release Box64, but vice versa that won't work on a 32 bit system. Plus you would need to use a 64 bit Wine, and that won't work with 32 bit applications, etc.

I'm puzzled by the error you are seeing (can't open mugen.cfg). If you have the same directory listed in the conf file and sh file then it should work the same. I also presume that mugen.cfg is in the same directory where the exe is. You might be able to do some additional debugging by inserting a couple of lines like this and see the log output matches your expectations:
pwd
ls -al
@RussellB if you had a line that said OPTIONS=** then that would likely throw some kind of error because * is the file wildcard.

Yeah what it was doing was including all the directories in the specified mugen folder into the command line to wine. So you ended up with something like mugen.exe char data ... in the wine command that was breaking it.

Now I just need to code the escape key to a button in wine and I'll be a happy camper.

Troopaking

@russellb escape key is why we are trying to autostart joy2key that escape is left bumper for example .

George from my testing 128 gpu memory is best performance .
I'm working with a guy to write a modified version of yourscriot that installs all mugens, changes gpu, install your script and makes mugen launch files .