Sega model 3 #segamodel3
-
we know that we are out of luck with model2 without sources, but model 3 has sources and this compile and runs okish somegames fullspeed some not
https://sourceforge.net/p/model3emu/code/790/tree/
i wonder if any dev can optimize it on the pi4, atm only the legacy renderer works
-
Supermodel requires desktop OpenGL, which could be achieved by running in an x session on a pi4. I am not a dev by any means but I do like to tinker. Do you have a link to any instructions on how to build the source? Even if we do get it running, I suspect the performance won't be very good...
-
@quicksilver well we have xinit on runcommand that will run a xserver session, that's not a problem and performance needs improvement but is not related to xserver, that's the reason of my post :)
to compile you only need to edit line 209 on Makefile.inc and add normal rpi4 flags -march=armv8-a+crc -mtune=cortex-a72 -mfpu=neon-fp-armv8 -mfloat-abi=hard
this is my compiled bin
https://mega.nz/file/zsFEVCpL#3ptKlQfEwQivjpsRJsDxDi86M_HhekuU1oXjG7D5Gjk
supermodel = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -fullscreen -no-throttle -no-dsb %ROM%" default = "supermodel"
-
@myzar it sounds like you already have it running then. What kind of framerate are you getting? Any further optimization would have to be on the end of the supermodel devs I would think.
-
@quicksilver depends on the game the virtua fighter saga is playable , games like daytona 2 se lags badly , in the 20/40 fps range , but i don't know for sure the show-fps options doesn't seem to work
-
@myzar this code above will run on retropie then? If so let me take a look at the code and see if I can add some tweaks that might work, can't promise anything but atleast I can try to do something, if not then the dev will have to give us his magic, btw thanks and good job.
-
@notthesame yes it does work on retropie as i said the emu depending on the game ranges from okish playable fps to too slow like the daytona games , only the legacy renders works , the new will give you broken triangles like in your old screeen shot, the emu needs X that's why is started with xinit
-
@myzar ok , let's see what we can do, but add tweaks to see if it speeds up, but that's all I can do for now, not sure how to modify stuff like using x, etc ... I'm running under opengl so I don't think I can run it. But I'll try my other retropie image that is using legacy.
-
@notthesame it needs openGL, that's why you have to run it using an x session or desktop.
-
@notthesame sorry i meant the legacy 3d engine in the emu itself , it has two engines you need to force -legacy3d in the command line, about the rpi4 video driver is the normal vc4-fkms-v3d over X
-
Guys any updated compiled file, the previous link has been removed?
-
https://www.dropbox.com/s/imtj1f0c1ao5nf6/supermodel?dl=0
This was compiled on an RPi4 given the instructions in this thread. Get Bass was able to come up and play but there's major graphics issues with it.
-
Edit:
Solved my own issues!
For me this was showing in a tiny window and wasn't registering any of the controls. To solve it I set the resolution to 640 x 480 in runcommand and have this in the emulators file:
supermodel = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 %ROM%" default = "supermodel"
Though by default it looks in <bin folder>/Config, for me it was looking in <my user folder>/Config for its ini file. I moved the ini into a folder there and it was good to go (guess a sym link would have solved this too?)
-
@mechafatnick hi there could you please do a step by step tutorial of how to get Supermodel installed & running on an existing copy of Retropie running on a Pi4 ? I have the 8GB version & want to see what its like, thanks !
-
@red_trev said in Sega model 3 #segamodel3:
@mechafatnick hi there could you please do a step by step tutorial of how to get Supermodel installed & running on an existing copy of Retropie running on a Pi4 ? I have the 8GB version & want to see what its like, thanks !
I know this is going back a bit, but i've written one here: https://mechafatnick.co.uk/2021/06/13/becoming-a-super-model-adding-model-3-games-to-your-pi4/
-
@mechafatnick awesome, thank you so much !
btw .... "Emulation Station configuration folder" download link is not working in the section for 'Adding Model3 as its own System in Emulation Station', could you please re-upload ?
-
@mechafatnick hi there, have followed your instructions but games do not work, please confirm I have correct folder structure for .ini
here is new line added to arcade emulator text file:
here is emulator itself:
maybe its the ROMs ? should i check their contents with the Games XML file ?
-
Same setup and same problems. Here's my runcommand.log ------> Permission denied
the permission number is 644 for Game.xml and It should be 755 ... I thinkParameters: Executing: xinit /dev/shm/retropie_xinitrc -- vt1 -keeptty X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 Build Operating System: Linux 5.10.17-v8+ aarch64 Raspbian Current Operating System: Linux retropie 5.10.17-v7l+ #1403 SMP Mon Feb 22 11:33:35 GMT 2021 armv7l Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:800x480M@59 smsc95xx.macaddr=DC:A6:32:09:3C:1B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 logo.nologo vt.global_cursor_default=0 quiet console=ttyS0,115200 console=tty3 root=PARTUUID=e22bcd10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait loglevel=3 consoleblank=0 plymouth.enable=0 Build Date: 19 April 2021 03:23:36PM xorg-server 2:1.20.4-1+rpt3+deb10u3 (https://www.debian.org/support) Current version of pixman: 0.36.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Mon Jun 14 17:01:44 2021 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. xrandr: cannot find mode 800x480 Set mode 800x480@59Hz on HDMI-1 Executing (via xinit): /opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 /home/pi/RetroPie/roms/model3/ecaj.zip /dev/shm/retropie_xinitrc: line 6: /opt/retropie/emulators/supermodel/bin/supermodel: Permission denied xinit: connection to X server lost waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.
New edit:
It loads with this:
pi@retropie:~ $ chmod 755 -R /opt/retropie/emulators/supermodel/bin pi@retropie:~ $ chmod 755 -R /home/pi/Config
But I have a message: cancelled - Network board not present, for some games (like Daytona2) but I found this https://www.supermodel3.com/FAQ.html#NetworkBoardError.
Spikeout run well. It runs at full speed on my Pi4. It's impressive. I have set my controller buttons, but I don't know how to exit the emulator with my gamepad yet. thanks @Myzar for this thread.
-
@dteam thanks , i changed those permissions but still no luck, checking error log gives:
/opt/retropie/supplementary/runcommand/runcommand.sh line 1259: xinit: command not found
I tried sudo apt get install xorg, which installed about 97% of the items but threw an error for the last package, and sudo apt get install xinit, which threw an error right away & didnt install anything ....
tried to load a Supermodel game again & same error in log : xinit: command not found
-
Red_Trev about 5 hours ago
@dteam thanks , i changed those permissions but still no luck, checking error log gives:/opt/retropie/supplementary/runcommand/runcommand.sh line 1259: xinit: command not found
I tried sudo apt get install xorg, which installed about 97% of the items but threw an error for the last package, and sudo apt get install xinit, which threw an error right away & didnt install anything ....
tried to load a Supermodel game again & same error in log : xinit: command not found
I don't know that much about Xinit. Probably @mitu know what to do.
I’ll take a look on that today.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.