Blackscreen after changing the resolution in the Retropi - Part 2

mitu

@dsquared said in Blackscreen after changing the resolution in the Retropi - Part 2:

DMT32 1200x960 60Hz 4:3

Hm, that's weird, 1200x960 is not a 4:3 resolution, you maybe meant 1200x900 ? You can set, in the config.txt file`

hdmi_force_hotplug=1
hdmi_ignore_edid=0xa5000080

so that the Pi ignores the EDID sent by the monitor. What's the output of tvservice -m DMT ?

dsquared

@mitu said in Blackscreen after changing the resolution in the Retropi - Part 2:

@dsquared said in Blackscreen after changing the resolution in the Retropi - Part 2:

DMT32 1200x960 60Hz 4:3

Hm, that's weird, 1200x960 is not a 4:3 resolution, you maybe meant 1200x900 ?

You are right! now you see why I need to change the resolution :)

ou can set, in the config.txt file`

hdmi_force_hotplug=1
hdmi_ignore_edid=0xa5000080
so that the Pi ignores the EDID sent by the monitor. What's the output of tvservice -m DMT ?

     mode 4: 640x480 @ 60Hz 4:3, clock:25MHz progressive 
       mode 5: 640x480 @ 72Hz 4:3, clock:31MHz progressive 
       mode 6: 640x480 @ 75Hz 4:3, clock:31MHz progressive 
       mode 8: 800x600 @ 56Hz 4:3, clock:36MHz progressive 
       mode 9: 800x600 @ 60Hz 4:3, clock:40MHz progressive 
       mode 10: 800x600 @ 72Hz 4:3, clock:50MHz progressive 
       mode 11: 800x600 @ 75Hz 4:3, clock:49MHz progressive 
       mode 16: 1024x768 @ 60Hz 4:3, clock:65MHz progressive 
       mode 17: 1024x768 @ 70Hz 4:3, clock:75MHz progressive 
       mode 18: 1024x768 @ 75Hz 4:3, clock:78MHz progressive 
       mode 21: 1152x864 @ 75Hz 4:3, clock:108MHz progressive 
       mode 32: 1280x960 @ 60Hz 4:3, clock:108MHz progressive 
       mode 35: 1280x1024 @ 60Hz 5:4, clock:108MHz progressive 
       mode 36: 1280x1024 @ 75Hz 5:4, clock:135MHz progressive 
       mode 47: 1440x900 @ 60Hz 16:10, clock:106MHz progressive 
       mode 51: 1600x1200 @ 60Hz 4:3, clock:162MHz progressive 
       mode 58: 1680x1050 @ 60Hz 16:10, clock:146MHz progressive 
       mode 82: 1920x1080 @ 60Hz 16:9, clock:148MHz progressive

Just thinking can I change the following lines in the config.txt file from:

#hdmi_group=2
#hdmi_mode=85

to:
hdmi_group=2
hdmi_mode=32

dsquared

@dsquared

Just thinking can I change the following lines in the config.txt file from:

#hdmi_group=2
#hdmi_mode=85

to:

hdmi_group=2
hdmi_mode=32

This didn't work

mitu

Have you tried selecting the resolution from the Runcommand launch menu ? You can keep the default (I assume 1080p) resolution for the front-end and change the resolution just for running the games.

dsquared

@mitu
Thanks but I am fine with the resolution in the emulators. What I would like is to increase the resolution in everything else- command prompt, file manager, raspi-config script, retroarc config script & retropie setup script.

Vodkanakas

@dsquared Have you tried after switching resolution did you try the other port after a reboot?

mitu

@dsquared what is your default video resolution (i.e. without any modifications to config.txt) ? Isn't it 1080p ? - this looks like the largest resolution supported by your display.

dsquared

@mitu

Sorry - I have sizes reversed - I want to increase the size of text on the screen - so I want to decrease the resolution......... 1080 1920x1080 is the max resolution...

mitu

@dsquared said in Blackscreen after changing the resolution in the Retropi - Part 2:

want to increase the size of text on the screen

The check out this FAQ entry on how to do it, there's no need to change the resolution.

dsquared

@mitu

Thank you! - The font was so small I couldn't see this option but it is corrected now.