Raspberry Pi 5 - official announcement

windg

@mbrennock If you like to test RetroPie with Pi5 you have to do a a manual install on top of Bookworm Lite : https://retropie.org.uk/docs/Manual-Installation/ . Then you can report here the issues or in the github page, and if you have the knowledge to help developers to fix them.

pi5gamer

Will the 64-bit bookworm lite work with the Dev version of retropie if I install it via ssh

mitu

@pi5gamer said in Raspberry Pi 5 - official announcement:

Will the 64-bit bookworm lite work with the Dev version of retropie if I install it via ssh

Yes. But there's no 'dev' version of RetroPie, just the regular one. Read on the rest of the topic to see what configuration are needed on the Pi5.

NOTE: Support for the Pi5 is a work in progress, so some things will not work or be broken - don't expect them to be fixed immediately. Also, unless you have Linux or some prior RetroPie experience, I'd recommend to wait until something stable/more polished comes up.

pi5gamer

@mitu

Can I download Retropie 4.8 image for the pi 4 from the GitHub and use that and also emulation station keeps on crashing when I load it up and I think its because of the amount of ram available to my GPU how do I fix this.

Thanks in Advance for your help

mitu

@pi5gamer No, that won't work. The Pi5 needs a newer OS and kernel/firmware which are not included in our images (Pi4 or not).

You need to install the latest RasPi OS Lite (bookworm) first and then install RetroPie manually on-top of it. As I said, if you're not familiar with Linux and haven't worked with RetroPie before, then it's better to wait for an actual release.

moio

The only minor issue I encountered (manual install on top of Lite) is an error installing Kodi from packages:

Sorry, but kodi is not installable for your OS/Platform via RetroPie-Setup

apt install kodi worked.

Should I open a GitHub issue?

mitu

@moio said in Raspberry Pi 5 - official announcement:

Should I open a GitHub issue?

No, it's a known issue with kodi and RaspiOS Bookworm. Has been reported to the RaspiOS folks. Also, Pi5/Bookwom support is preliminary, so there's no use to open issues for it.

retropieuser555

Has anyone seen a query on raspberry pi forums, bookworm or dolphin GitHub why you can load Dolphin, AetherSX2 via GUI but not while in terminal/CLI and you get that QT5 error above?

It seems odd and I'm not quite sure where the issue is, as it occurs on Ubuntu 23.10 & raspberry Pi OS Bookworm. So it doesn't seem a problem specific to the OS? Or it's purely hardware (pi or arm64) specific? As it seems to occur on pi4 using bookworm as well

edit: managed to get it almost load turning on X11 and using startx

windg

Without have the knowledge, maybe the package for qt5 or qt6 is missing (qtbase5-dev). I haven't check this emulators yet, so the above is just a guess .

mitu

@retropieuser555 said in Raspberry Pi 5 - official announcement:

Has anyone seen a query on raspberry pi forums, bookworm or dolphin GitHub why you can load Dolphin, AetherSX2 via GUI but not while in terminal/CLI and you get that QT5 error above?

Because they need a desktop env to run ? Not all application can run outside a desktop environment (dolphin for sure does not).

windg

It's look similar then with the duckstation standalone when the dev droped the no-gui option.

retropieuser555

Okay I've got it figured out,

startx /opt/retropie/emulators/dolphin/bin/dolphin-emu-nogui -e /home/pi/RetroPie/roms/<rom name>

This works happily from Terminal/CLI. It doesn't need a desktop environment, just a window to be opened (and x org installed etc). I also fixed the tiny window issue by using this fix below, which you'd need to use for your particular display and then rebuild dolphin, I've only tested it on a 1080p display though.

https://forums.dolphin-emu.org/Thread-small-fullscreen-on-linux

So now adding startx to the emulators.cfg won't work as startx in the runcommand.sh will always turn that into xinit, but xinit doesn't work from the command line for me.

Anyone had any success getting xinit to run from command line? If we can get that working this will load fine, I'm already playing with genuine wiimotes using my dolphinbar, which is all kinds of awesome on a Pi 5 RetroPie setup.

mitu

@retropieuser555 said in Raspberry Pi 5 - official announcement:

Anyone had any success getting xinit to run from command line? If we can get that working this will load fine, I'm already playing with genuine wiimotes using my dolphinbar, which is all kinds of awesome on a Pi 5 RetroPie setup.

Yes, but I had to remove ~~xorg-server-legacy~~ xserver-xorg-legacy first, seems that on Bullseye is buggy and prevents xinit from properly starting.

windg

It's not better to try with wayland instead of xorg ?

retropieuser555

@mitu So apparently I don't have that installed so that's not the issue, I'll put up a proper error log in a bit:-

pi@raspberrypi:~ $ sudo apt remove xserver-xorg-legacy
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'xserver-xorg-legacy' is not installed, so not removed
The following packages were automatically installed and are no longer required:
  libdecor-0-0 libdecor-0-dev libdecor-0-plugin-1-cairo libpisp0.0.1
  libwayland-bin libwayland-dev
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 63 not upgraded.

Xinit error log: https://pastebin.com/Yr9BcCuT

I think the problem is here:-

Fatal server error:
[  9540.595] (EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)

mitu

@windg said in Raspberry Pi 5 - official announcement:

It's not better to try with wayland instead of xorg ?

For Wayland there's no similar mechanism in RetroPie like XINIT to instruct runcommand to start the emulator in an Xorg sesion. For Dolphin in particular, there's no native Wayland support so it would run under XWayland and use the x11 API anyway, so there's no benefit in running it under Wayland.

mitu

@retropieuser555 without knowing the command that started this, the error log is not much help. Regardless, I'll add at some point support for dolphin to be run directly from EmulationStation, you can wait until then to test again.

retropieuser555

@mitu Ah sorry,

Here's the command:-

xinit /opt/retropie/emulators/dolphin/bin/dolphin-emu-nogui -e "/home/pi/RetroPie/roms/gc/AC.rvz"

Must be a permissions issue, I just ran it with sudo and it worked fine.

mitu

Just prefix the emulators.cfg entry with XINIT: and it should work:

dolphin-x11-vk = "XINIT:/opt/retropie/emulators/dolphin/bin/dolphin-emu-nogui -v vulkan --config Dolphin.Display.Fullscreen=True -b -e %ROM%"
dolphin-x11 = "XINIT:/opt/retropie/emulators/dolphin/bin/dolphin-emu-nogui --config Dolphin.Display.Fullscreen=True -b -e %ROM%"

EDIT: make sure you also have installed the matchbox-window-manager package.

retropieuser555

@mitu Wow, you're right, wonder why me doing it different it didn't want to work for me, very strange.

Btw the -b batch option gave me an error (I think it's for the Dolphin-gui only) so I just removed it and it plays fine, that's awesome thank you