Background Music [Continued from Help/Support]

Livewire

Made it in JUST under 30 minutes (well, at least before I started typing my reply) :) 1.02's up:

/home/pi/PyScripts/DisableMusic . If this location exists (either as a folder, OR as a file), the script will cease to play music. Once found, it waits 15 seconds before checking again, so after removing that file it may take up to 15 seconds for the script to resume playing music. Did this mostly because if you're disabling music, you're probably disabling it for a while, not just for 2 or 3 seconds, so why check it every second.
startmusic="" (near the top of the script). Stick in the exact case-sensitive filename, and if that file is found in the bgm list, it will always play first when the script starts.

Invariably about 3 seconds after I posted it to pastebin I did notice that I have startmusic in the "#local variables" section instead of config; it's there, just go down a few lines :) Also, if you don't want it to check /home/pi/PyScripts/DisableMusic, such as if you have it in a different install location, the lines that check for that file are 66 and 70; make sure they match, but you can change them freely.

mike

Thanks for this script @Livewire . I've been playing around with it a bit today, works great.

I'm still very much a beginner with python and I'm a bit stuck finding a way to stop the music if I quit out of emulationstation.

At the moment the music still plays after ES has exited, I don't wan't to quit the script, just stop the music until ES starts again.

I'm trying to do a bit more reading to understand your code for myself but if you made another update could you add that feature?

thanks again

Livewire

@mike I might not get a good chance to test it before tomorrow night but I should be able to do that, it's another use-case I didn't think of :)

Livewire

@mike Done, ended up having time to test before the weekly gamer meetup :) Added a few extra comments to (hopefully) help with dissecting the code as well.

Changes:

Just what Mike wanted; the music stops when ES is not running, and resumes within 10 seconds of it restarting.
I moved startsong up into the config section where it should have been, cause I'm a derp.

mike

That's great, thanks. The comments really help too.

zerojay

@Livewire said in Background Music [Continued from Help/Support]:

/home/pi/PyScripts/DisableMusic . If this location exists (either as a folder, OR as a file), the script will cease to play music. Once found, it waits 15 seconds before checking again, so after removing that file it may take up to 15 seconds for the script to resume playing music. Did this mostly because if you're disabling music, you're probably disabling it for a while, not just for 2 or 3 seconds, so why check it every second.

This is a horrible idea. This means that if the file exists on an external hard drive, the hard drive will never spin down because it's constantly being accessed. This also bad if your pi does not have a constant power source.

How about instead of looking for a file, it simply kills the script off and restarts it?

Livewire

To be truly honest, that I'm not actually sure how to do (without running an entirely separate script I mean, since there's not really a way to have a python script kill and restart itself at a later time that I know of). If you've got it running on an external HDD, I'd recommend not using 1.03 then.

HaroldTemple

Hi. My English is very bad. Could you make a video tutorial? In this way, we would see how to do it and we would see progress.

HaroldTemple

I followed step by step and it does not work. Version 3.7 Retropie in a Raspberry 3b. .mp3 and .ogg files. A video tutorial clarify everything. Thank you.

cyberneticwired

I tried as well to no avail.

Nayin

Hi! I need help, all works for me if I use in the console :

sudo python /home/pi/PyScript/Test1.py

But when I reboot the py, the music dont work.

This is my /etc/rc.local file

_IP=$(hostname -I) || true
if [ "$_IP" ]; then
printf "My IP address is %s\n" "$_IP"
fi
"(sudo python /home/pi/PyScript/Test1.py) &"
exit 0

Nayin

@Nayin Ok the problem are the "", sorry ah ah ah :P

Nayin

Music dont stop when I use the amiga emulator.
Can you help me?

HoolyHoo

Just add the Amiga emulator to line 25 in the script.

Nayin

@HoolyHoo It is added by default, the same problem with pifba and it this also added :(

Nayin

Ok the error is the "2", in uae4all2.
Delete the "2" in line 25 and works. Thx

figolu31

Amazing script, it work like a charm !!!
It's possible to configure buttons for activate and desactivate the script ??? or for configure a fast - rewind audio player ???
It would be amazing !!!!

ExarKunIv

Just wanted to say i love the BGmusic. works great every time and easy to tweak if need be

manser87

Oh boy... this sounds complicated. I was hoping for something a little more "pre packaged" lol. Setting up my raspberry pi with retropie and all my roms was a fun project but i also had google and some great youtube videos holding my hand in the process. Adding music to my pi would be the finishing touch to something i get excited to share with my friends everytime they come over. Ill try my best to wrap my head around this with my university of google.com education. I still hope for someone to simplify this as much as possible. I think a song selection in the emulationstation menu would be a great addition. Much like there is a theme selection built in.

ExarKunIv

@manser87

for the most part it is,

he does a very good job of explaining what you have to do and how.
Once you get a better handle on how to edit some of the files. this will be easy for you.

it threw me for a loop for a min when the music did not cut for of the Emulators, but then looked and found where i needed to add it