Emulationstation command not working
-
When I boot up the system I'm always beeing send to "cmd" and I looked in the forum and they said to get back to the "normal GUI or Setup" I should type: emulationstation
That's it, however when I type it in the screen get's black for a while and then I'm just beeing send to the "cmd" again. That's it nothing else, no Error message, no nothing just: "pi@retropie:"
What's the problem, or what am I doing wrong?Pi Model 3
Power Supply used: USB Port of TV
RetroPie Version 4.01
Built From: Pre made SD Image on RetroPie website
USB Devices connected: XBox 360 wired controller, wireless Keyboard/Mouse
Controller used: XBox 360 controler
Error messages received: /
Log found in /dev/shm/runcommand.log (if relevant): /
Guide used: /
File: /
Emulator: /
Attachment of config files: /
How to replicate the problem: Type emulationstation in command line -
Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first (which is at the top of every page, and has to be agreed to when registering)
-
@BuZz Ok now I did, still the sameproblem though :P
-
@JHNTR Please read it again then as it gives clear instructions on what information you need to provide.
-
@BuZz like this?
Sorry, first time in this forum :D -
@JHNTR Yes thanks.
You cannot power a RPI3 from a USB port of a TV. Also please confirm how many Raspberries you see on boot.
-
@BuZz i see 4 Raspberrys on boot
-
@JHNTR Then the issue is most likely your power source. If you still have trouble with a proper PSU, the next thing would be to check the image was written currently, and that the sdcard isn't faulty.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.