Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons

future.child

@jlsoft so you changed:
strcmp(option, "SDL_JOY_0_SECOND_AXIS" into strcmp(option, "SDL_JOY_0_SECOND_AXIS_INDEX" and
fp, "SDL_JOY_0_SECOND_AXIS=%d\n"... into fp, "SDL_JOY_0_SECOND_AXIS_INDEX=%d\n"...?

I will update the source and binary, later today, and also fix the JOY_SPEED_ADJUST being written twice.

JLsoft

@future-child
HEH.

Ugh...

(I was about to reply to explain how during my fix attempts, adding _INDEX or adding other stuff onto the end didn't have any effect, and only until I actually changed part of the 'SDL_JOY_0_SECOND_AXIS' part would it work...)*

Okay, so I decided to start from scratch to make sure it was acting the way I was describing...went and changed the source to test, and realized I needed to also change the atari5200.py that auto-maps the RetroArch controls to the atari800.cfg...then noticed line 96:

elif line.startswith("SDL_JOY_0_SECOND_AXIS"):

'startswith'...so SDL_JOY_0_SECOND_AXIS_ENABLED was also getting set to 2 right before the executable ran...and it's looking for 1 or T(rue).

It is really sad how long I spent messing with this last night and looking at the wrong thing :D

So yeah, it's only your copy of the atari5200.py script that needs altered, since currently it'll match SDL_JOY_0_SECOND_AXIS_ENABLED= and make it's value the same as SDL_JOY_0_SECOND_AXIS=.

future.child

@jlsoft Ok, now it makes sense to me.
As i do not use the python script myself, i did not notice anything wrong.
I specify a config file in the emulators.cfg file so i can have different configurations per system/rom where this python script afaik only uses/home/pi/.atari800.cfg.

I will make changes to the python script and fix the JOY_SPEED_ADJUST being written twice.

I think changing elif line.startswith("SDL_JOY_0_SECOND_AXIS") at line 96 to
elif line.startswith("SDL_JOY_0_SECOND_AXIS=") (notice the = sign) should be enough to fix it.

Used2BeRX

@future-child Hey bud.

I still haven't had a chance to check out that new emulator on the two or three games that weren't working right with the other one.

I was wondering though if you'd had an opportunity to look into the other issue with this emulator with the two bugs? I believe at some point you had said you belived that it was due to a difference between the Atari 5200 controller and the Atari 800 keypad, but then you didn't mention anything about it afterward.

I'd like to spend some time getting back to this and wrapping everything up so I could give you the alternate configs for every game that makes the control functions as uniform as possible between all of the games.

future.child

@Used2BeRX
I did spend some time getting the inputs right but so far without success.
To get it right the sdl input should have to be rewritten to use a event driven model instead of a polling model.
The polling it now uses has timing issues causing the misfiring experienced in roms like choplifter.

The input crosstalk is another thing requiring a lot of work.
The original 5200 used multiplexers to select which joystick port places keypad (row/column) data on the bus, as far as i can tell the core does not have this implemented so all incoming data appears to come from all joystickports.

rkoster

Hey @future-child , a quick question related to the 800/XL/XE computers rather than the 5200, if I may... in several games, such as Archon or Bruce Lee, hitting the joy0 button 0 seems to pause the game as well as firing. I found reference online to hitting F7 to toggle "keyboard mode" but that didn't seem to work. I have both keyboard joysticks disabled. Normal pause is supposedly CTRL-1, and I don't understand why J0B0 would be triggering that. Since you've been in the code, any chance you could take a peek at this?

rkoster

Aha, figured it out. If you map the 5200 keypad to button 0, that will be pause on the Atari 800 for some reason. I moved it to J0B1 and now I can fire without pausing.

hansolo77

I'm eager to get Atari 5200 and Atari 800 working better on my system. Is this very hard to setup? The current method (using the one available in the Docs) really kinda sucks.

future.child

@rkoster Good to head it's working.

@hansolo77 once you have the original emulator setup all you have to do is replace the binary in a ssh shell:

cd /opt/retropie/emulators/atari800/bin/
sudo cp atari800 atari800.original
sudo wget https://github.com/futurechild/atari800-rpi/blob/master/atari800?raw=true -O atari800
sudo chmod +x atari800

and adjust the configuration files to suit your needs:

I myself use the following emulators.cfg

atari800

atari800 = "/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari800/atari800.cfg %ROM%"
default = "atari800"

atari5200

atari5200="echo %ROM: -\ % > /dev/null;/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari5200/atari5200.cfg -cart %ROM%" 
default = "atari5200"
atari800 = "/opt/retropie/emulators/atari800/bin/atari800 %ROM%"

and have the following config files:

atari800.cfg

Atari 800 Emulator, Version 3.1.0
ROM_OS_A_PAL=/home/pi/RetroPie/BIOS/ATARIOSA.ROM
ROM_OS_BB01R2=/home/pi/RetroPie/BIOS/ATARIXL.ROM
ROM_5200=/home/pi/RetroPie/BIOS/5200.ROM
ROM_BASIC_C=/home/pi/RetroPie/BIOS/ATARIBAS.ROM
ROM_400/800_CUSTOM=/home/pi/RetroPie/BIOS/ATARIOSB.ROM
OS_400/800_VERSION=AUTO
OS_XL/XE_VERSION=AUTO
OS_5200_VERSION=AUTO
BASIC_VERSION=AUTO
XEGS_GAME_VERSION=AUTO
ATARI_FILES_DIR=/home/pi/RetroPie/BIOS
HD_READ_ONLY=1
PRINT_COMMAND=lpr %s
SCREEN_REFRESH_RATIO=1
MACHINE_TYPE=Atari XL/XE
RAM_SIZE=64
DEFAULT_TV_MODE=PAL
MOSAIC_RAM_NUM_BANKS=0
AXLON_RAM_NUM_BANKS=0
ENABLE_MAPRAM=1
DISABLE_BASIC=1
ENABLE_SIO_PATCH=1
ENABLE_H_PATCH=1
ENABLE_P_PATCH=1
ENABLE_NEW_POKEY=1
STEREO_POKEY=0
SPEAKER_SOUND=1
BUILTIN_BASIC=1
KEYBOARD_LEDS=0
F_KEYS=0
BUILTIN_GAME=0
KEYBOARD_DETACHED=0
1200XL_JUMPER=0
CFG_SAVE_ON_EXIT=0
CARTRIDGE_TYPE=0
CARTRIDGE_PIGGYBACK_TYPE=0
CARTRIDGE_AUTOREBOOT=1
CASSETTE_LOADED=0
CASSETTE_WRITE_PROTECT=0
RTIME=1
COLOURS_NTSC_SATURATION=0
COLOURS_NTSC_CONTRAST=0
COLOURS_NTSC_BRIGHTNESS=0
COLOURS_NTSC_GAMMA=0.3
COLOURS_NTSC_HUE=0
COLOURS_NTSC_GTIA_DELAY=26.8
COLOURS_NTSC_EXTERNAL_PALETTE_LOADED=0
COLOURS_NTSC_ADJUST_EXTERNAL_PALETTE=0
COLOURS_PAL_SATURATION=0
COLOURS_PAL_CONTRAST=0
COLOURS_PAL_BRIGHTNESS=0
COLOURS_PAL_GAMMA=0.3
COLOURS_PAL_HUE=0
COLOURS_PAL_GTIA_DELAY=23.2
COLOURS_PAL_EXTERNAL_PALETTE=
COLOURS_PAL_EXTERNAL_PALETTE_LOADED=0
COLOURS_PAL_ADJUST_EXTERNAL_PALETTE=0
ARTIFACT_NTSC=NONE
ARTIFACT_PAL=NONE
ARTIFACT_NTSC_MODE=0
SCREEN_SHOW_SPEED=0
SCREEN_SHOW_IO_ACTIVITY=1
SCREEN_SHOW_IO_COUNTER=0
SCREEN_SHOW_1200XL_LEDS=1
SOUND_ENABLED=1
SOUND_RATE=44100
SOUND_BITS=16
SOUND_FRAG_FRAMES=0
SOUND_LATENCY=20
VIDEO_FILTERING=1
VIDEO_ZOOM=1.00
SDL_JOY_0_ENABLED=1
SDL_JOY_0_LEFT=276
SDL_JOY_0_RIGHT=275
SDL_JOY_0_UP=273
SDL_JOY_0_DOWN=274
SDL_JOY_0_TRIGGER=306
SDL_JOY_USE_HAT=1
SDL_JOY_0_SELECT=8
SDL_JOY_0_START=9
SDL_JOY_0_TRIGGER1=1
SDL_JOY_0_TRIGGER2=2
SDL_JOY_0_ASTERISK=0
SDL_JOY_0_HASH=4
SDL_JOY_0_OPTION=5
SDL_JOY_0_SECOND_AXIS=2
SDL_JOY_1_ENABLED=0
SDL_JOY_1_LEFT=97
SDL_JOY_1_RIGHT=100
SDL_JOY_1_UP=119
SDL_JOY_1_DOWN=115
SDL_JOY_1_TRIGGER=306

atari5200.cfg has the following different settings:

MACHINE_TYPE=Atari 5200
RAM_SIZE=16
BUILTIN_BASIC=0

You may want to read this thread trough as there are some interesting posts regarding configuration options and known bugs.

If you run into problems, this forum is a good place to ask for help.

Used2BeRX

@future-child How does the new emulator you ported over handle these issues?

It's been a while now, but I believe that the list of games the two bugs effected was rather small overall. Since I already have all of the controls mapped out on the spreadsheet, I'd just have to figure out how to get them working on the new emulator for the buggy games.

future.child

@used2berx as far as i have tested all controls work as intended in kat5200, even analog.

I think the work you've done with configs is great and could also be used as a template to create controller mappings for other emulators as well, or at least as a lookup table to link roms to desired controller configurations.

GreyRhino

@rkoster , I'm having a similar issue where several of my buttons pause the game in Bruce Lee. I'm using a PS3 controller and the 4 primary action buttons pause the game (but still work as mapped to *, # and punch/kick). I have the option / select working, just cant figure out where you remap the 5200 keypad to something other than button 0. Can you provide some details on that? I've read through the thread and poked around in a few files but am missing something. Your help would be appreciated.

rkoster

@greyrhino My Pi setup is currently disconnected but soon as I reconnect it I will post my config file here.

Used2BeRX

@future-child Cool man. I haven't forgotten about this. I just got pulled way in another direction and then some real life stuff came up the last 3 or so weeks. I should be able to get back to this and give you more feedback soon. :)

zerojay

I created a script to install @future.child's version of atari800 and put it into my repo tonight: https://github.com/zerojay/RetroPie-Extra/blob/master/scriptmodules/emulators/atari800.sh

I'm not using the automatic controller updating script (atari5200.py) because for some reason, I get very strange permissions errors when I use the script to try copying it to the right place and for some reason runcommand can't see the script either.

Used2BeRX

@zerojay Not sure what you mean man. What did you do?

I don't know anything about how repos work.

darknior

@used2berx All is explain here : https://github.com/zerojay/RetroPie-Extra

Execute :

git clone https://github.com/zerojay/RetroPie-Extra.git
cd RetroPie-Extra/
./install-extras.sh

And you will have new stuff on you EXPERIMENTAL Retropi-Setup ;)

Used2BeRX

@darknior Well I was working quite a bit with @future-child on testing changes for the emulator, so I've probably already got it. :)

I'm assuming what @zerojay did was make it easier to install for people who don't have it though?

darknior

@zerojay Thanks for this update :)

I ve not read all the thread but i don't understand all fine ...

@zerojay you make for us this :

@future-child said in Atari 5200: New version of Atari800 (Beta): two triggers (Moon Patrol!!!), hat start and exit buttons:

cd /opt/retropie/emulators/atari800/bin/
sudo cp atari800 atari800.original
sudo wget https://github.com/futurechild/atari800-rpi/blob/master/atari800?raw=true -O atari800
sudo chmod +x atari800

I have verify and emulators.cfg is ok for :

atari800 = "/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari800/atari800.cfg %ROM%"
default = "atari800"

Not the second, i have :

atari800 = "/opt/retropie/emulators/atari800/bin/atari800 -5200 -cart-type 4 -cart %ROM%"
default = "atari800"

And you write :

atari5200="echo %ROM: -\ % > /dev/null;/opt/retropie/emulators/atari800/bin/atari800 -config /opt/retropie/configs/atari5200/atari5200.cfg -cart %ROM%"
default = "atari5200"
atari800 = "/opt/retropie/emulators/atari800/bin/atari800 %ROM%"

And i don't found the two atari800.cfg n atari5200.cfg :(
Some one can help me ?
Thanks

future.child

@Used2BeRX , basically this adds the option to install my version (and other systems/ports/etc) from within the main retropie setup script.

@darknior did you have the default atari800 installed and working prior to replacing the binary with my version ?

@zerojay I also see there are lot's of other systems you added, maybe kat5200 could be one of them ?
I created a rudimentary installer for it here but you may want to remove the default overwriting of config files from emulators.cfg as that is just a workaround to enable for per-rom config's.