Please test: Random Game selection/launch via Video Screensaver

darknior

root@retropie:~# omxplayer --layer 10010 --no-osd --aspect-mode letterbox --subtitles test.srt '/home/pi/RetroPie/medias/gba/videos/Advance Guardian Heroes (USA).mp4'
Video codec omx-h264 width 720 height 480 profile 100 fps 59.940060
Audio codec aac channels 2 samplerate 48000 bitspersample 16
Subtitle count: 1, state:  on, index: 1, delay: 0
V:PortSettingsChanged: 720x480@59.94 interlace:0 deinterlace:0 anaglyph:0 par:1.00 display:0 layer:10010 alpha:255 aspectMode:1

I have the glitch !

root@retropie:~# omxplayer --layer 10010 --no-osd --aspect-mode letterbox --no-ghost-box --subtitles tt.srt '/home/pi/RetroPie/medias/gba/videos/Advance Guardian Heroes (USA).mp4'
Video codec omx-h264 width 720 height 480 profile 100 fps 59.940060
Audio codec aac channels 2 samplerate 48000 bitspersample 16
Subtitle count: 1, state:  on, index: 1, delay: 0
V:PortSettingsChanged: 720x480@59.94 interlace:0 deinterlace:0 anaglyph:0 par:1.00 display:0 layer:10010 alpha:255 aspectMode:1

Same !

@pjft On each of those TVs, does it work or not with and without the captions, with and without overscan?

For the moment i only try on the Plasma, but i will try on others quickly.
On the Plasma it works fine without captions, glitch with captions at bottom of the screen only. Without Over scan.

@pjft Also, why can't you use overscan on the plasma? Does it not support it? You'd prefer not to? I'm just curious - don't know much about it.

Because i have the HDMI adapter to convert video to YUV. With Over scan i can't see all the image, i lost some part, more at left of the screen.

darknior

The bug. Some time the glitch gone and come back 10 15 sec after ...

I activate Overscan, and try with ES closed and it's working PERFECTLY !
I also restart the PI to go back on ES with OVERSCAN activated and there it works perfectly too.
With OVERSCAN all is working fine !

My only problem is that now i can't remove again the overscan ... i choose no in the menu but nothing append :(

pjft

@darknior Interesting.

Also, thanks for explaining - that makes sense. I was just curious what set up required overscan - I thought it was mostly for old CRTs.

You say that you set Overscan to No and you still have the glitch? Then it may be something different entirely. Or not :) But I'd love to check.

Can you send me a video of the glitch happening?

The idea behind the commands would be to try to find a setup that works for you, based on these commands: elinux.org/Omxplayer

Would you be able to test out a few options, and see if it changes anything?

Say testing -z, -d, or -rand see if it changes anything.

--lines 1 is also an option.
--display <different number, 0 or 1 for instance>

Basically anything that may change the video output and see if that helps.

Let me know if any of these makes it better or worse. :)

pjft

Oh. Removing overscan is what you don't want. You want to re-add overscan (i.e. mark it as "yes"). Then you'll get back to seeing the entire picture :)

darknior

Yes i will try these line but first i must found to remove Overscan, for the moment i can't remove it :(
I don't understand how to remove it, when i choose No in the Retropie-Config it is always there :(

pjft

@darknior Choose Yes. That's what you want. It's "on" by default.

EDIT: you will need to reset the system after that to that effect.

darknior

@pjft I want to remove Overscan, to have the Glitch and make the tests.
But i can't it is so strange bug i never see before :(

I choose no to remove i reboot and always Overscan
I go edit the config.txt

disable_overscan=1

Setting is fine to remove Overscan but Overscan tay always !
It is a silly joke :(

Like some time it mount my 1To Hard drive with videos and games without any problem, and some other i reboot 10 times and i never have my HDD :( :( :(

pjft

@darknior you're not following. The error happens when overscan is on :)

Trust me on that. Mark it yes (it should become 0) and then reboot. The glitch should come back.

It's just an unfortunate name for the option, with the negative label.

darknior

Like write in this doc : https://github.com/RetroPie/RetroPie-Setup/wiki/Overscan

My image is now croped and i can't read left menu :(
I want to add again the black borders to see all my image screen !
I try with and without Overscan and nothing change it is silly and it really boring me
I really don't understand, like when my PI don't want to auto mount my HDD !!!

And i only have the BUG with the black borders, if i can't put them back i can't do any test :( :( :(
Now i want to take my PI and throw him by the window !
1 hour left for nothing :(

pjft

@darknior let's take a moment here. We can get this back. The borders only show up if you have Overscan enabled.

If you edit the /boot/config.txt file

And set

disable_overscan=0

Or comment out the disable overscan=1 line, and reboot, you'll get the borders back.

If you don't yet, do send over your config.txt file's content via pastebin, as there are a few finer grained options we may need to add, namely the actual seeing for the size of the border, and I want to see what you have there before making any changes.

Are you booting from a USB Drive/PiDrive?

Thanks for testing and sorry for making you go through this, but we'll sort this!

pjft

Hi @darknior .

Did you manage to get your Pi back to the previous state? If not, send over the config.txt file - I want to make sure we sort that out. :)

darknior

Thanks for your help, i already try to use :

disable_overscan=0
or
#disable_overscan=1

But noting is working, it is so strange ? :(

https://pastebin.com/R6Xx3nut

I'm booting on my 16 Go SD Card.
And i have enable auto-mount for my USB Hard Drive 1To Seagate with all the ROM, ISO, and VIDEOS !

pjft

@darknior send over the full file.

These are the following parameters you then want to adjust:

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
overscan_left=16
overscan_right=16
overscan_top=16
overscan_bottom=16

Start with those (uncomment them!) and adjust the values as needed :)

See if it makes a difference. In case of doubt, add very large numbers, to see if it's making an effect.

If not... we'll see. I recently heard of a case where we were editing the wrong boot/config.txt file :)

darknior

I also already try it last day when read the doc

http://elinux.org/R-Pi_Troubleshooting#Big_black_borders_around_small_image_on_HD_monitors

Today i try again with

overscan_left=40
overscan_right=40
overscan_top=40
overscan_bottom=40

But noting change, it is my problem :(

Maybe like you write there is an other file to edit ?
I modify : /boot/config.txt

pjft

@darknior Well, try 400 - something meaningful. You'll notice immediately if you're editing the right file :) Comment the "disable_overscan" line, as you had it earlier.

If you're having problems on your left side, maybe just start with:

overscan_left=500

If anything happens, it'll be immediately visible. What TV brand and model are you using, by the way?

I don't see anything weird on your file, so I can't comment much more at the moment.

I was referring to this, but I don't think it's your case.

Let me know.

darknior

Hoooooo i finally understand something so strange LOL

Over scan are working fine but not every where !

I have them on the RETROPIE BOOT LOGO with the red pad. I can see the 16 black borders and now the 400 left border :)

alt text

But when ES is starting and when the carrousel of systems is show, the Over scan disappear :(
So strange ... how is it possible ???

pjft

@darknior Hm.

That is weird. Can you send over a picture?

Try doing 400 on all sides now, just for the sake of keeping it proportional.

Can you send over a picture of ES, for me to try to understand what may be happening?

What about when the video renders full screen, does it also not show the borders?

And you're certain that this wasn't happening in ES before?

What about when you go to the terminal, do you also see the borders?

darknior

You can see RETROPIE in mini size at beginning and end
ES normal size and some videos ...
I think videos are fine in full screen not cropped, we ca see life bars in games ...
I never have this problem before

pjft

@darknior Huh.

That is weird.

See if using this app helps:

https://github.com/ukscone/set_overscan

Also, I found this thread:

https://www.raspberrypi.org/forums/viewtopic.php?p=305797&sid=4fe5fc284854fe3723841f79ea2c6546#p305797

How are you starting up ES? Via ssh? Does it start on boot on the Pi?

Weirdly (or interestingly), others have complained about the same in the past:

https://retropie.org.uk/forum/topic/82/overscan-issue

Did you per chance update RetroPie recently and the system as well?

Reading that thread, it seems that having double entries on the file may cause problems. Do you have any repeated entries there?

pjft

@darknior What if you uncomment overscan_scale=1 ?

EDIT: I read in a few places that this is what you may need. Please test. Raspi-config must have edited quite a few options when we used it, and now reversing them seems to be guesswork.