Attract Mode with RetroPie - Alternative to EmulationStation

[BuZz]

@InsecureSpike if you don't then you have the old autostarting - choose "start emulationstation at boot" and it will create it.

[InsecureSpike]

@BuZz thank you buzz

[BuZz]

@InsecureSpike I have just changed the retropie-setup script so when updated if it detects the old autostart scheme, it will update it to the new one.

[robertybob]

@InsecureSpike

Welcome back :) Hope you're been well! Any chance of a new Attract theme set from yourself? :D

[InsecureSpike]

@robertybob hello mate, yup all good thank you, just been moving apartments once on july, the again in october, haha
so only just set my pi's up.
yup working on something already!

how's you?

[reigelgallarde]

hello, I have tried installing this using the retropie_setup.sh...
All is well, except that I only have retropie and ports menu... Did I missed something?

Any help is appreciated even just links I could read.

Thanks!

[BuZz]

@reigelgallarde it only configures attractmode for a) emulators/systems you have installed and b) non empty rom folders.

If you give me some more information I can advise. If you didn't have any roms installed, install some then update Attract Mode and it will add the configs.

I could make it skip the check for the roms - but it's still in experimental as I had some gui stuff to add to simply the rescanning etc.

[Graboid]

Pi Model: (3B)
RetroPie Version Used: (4.1.5)
Built From: (Floob v5 Pre made SD Image)
USB Devices connected:Keyboard
Controller used: Xin-Mo USB
Error messages received: see below
Guide used: Method 2 here

Hi all,
I'm having trouble upgrading from the v5 image. I did the following

cd ~
mkdir develop
sudo apt-get update
sudo apt-get upgrade
cd ~/develop
git clone --depth 1 https://github.com/mickelson/attract attract
cd attract
make USE_GLES=1
sudo make install

I always get the following errors, after the 'sudo make install' command.

pi@retropie:~ $ cd develop
pi@retropie:~/develop $ cd attract
pi@retropie:~/develop/attract $ sudo make install
flags: -Wl,--export-dynamic -DDATA_PATH="/usr/local/share/attract/" -O2 -DNDEBUG -I/opt/vc/include -L/opt/vc/lib -Iextlibs/miniz -Iextlibs/audio/include -D__STDC_CONSTANT_MACROS -I/usr/local/include -I/usr/include/freetype2 -I/usr/include/AL -Iextlibs/squirrel/include -Iextlibs/sqrat/include -Iextlibs/gameswf -DFE_RPI -DUSE_GLES -DUSE_FONTCONFIG -DUSE_SWRESAMPLE
fatal: No names found, cannot describe anything.
install -D -t /usr/local/bin attract
mkdir -p /usr/local/share/attract/
cp -r config/* /usr/local/share/attract/
pi@retropie:~/develop/attract $

[robertybob]

@Graboid I thought that error message was normal to be honest

[Graboid]

When I load Attract Mode, it's the same version and doesn't apper to be updated, according to the version number in the first menu.

[lilbud]

Started from the image file, Created configs for all of the systems, but nothing shows up.

Generated by Attract-Mode v2.0.0

executable /opt/retropie/supplementary/runcommand/runcommand.sh
args 0 SYS nes "[romfilename]"
rompath /home/pi/RetroPie/roms/nes
romext .zip;.nes
system Nintendo Entertainment System (NES)
info_source thegamesdb.net
artwork flyer /home/pi/RetroPie/roms/nes/flyer
artwork marquee /home/pi/RetroPie/roms/nes/marquee
artwork snap /home/pi/RetroPie/roms/nes/snap
artwork wheel /home/pi/RetroPie/roms/nes/wheel

[Brigane]

Edited: Thought I had the answer, but I was wrong.

[NintendoFan64]

@Floob I so not trol

[BuZz]

@NintendoFan64 Why are you posting that here ? I gave you the benefit of the doubt on the other thread, but enough is enough.

[InsecureSpike]

could someone with all available emulators please share their attract.cfg, to help me with my theme/layout finalisation. (via pastebin)

thank you

[virg1]

Hi Floob. Will Attract Mode work with the latest image provided if roms from USB drive? the Retropie menu, Roms, configs, and bios folders were all properly mounted to USB drive using the Automatic Mount (easiest method). Everything gets moved over automatically when you create a folder called "Retropie-mount" as you probably already know (this came out a few weeks ago). There are other folders which get put into the roms folders, some maybe for scrapings (not sure how all that works) or other art and not sure if messes with the image I downloaded for Attract Mode Thanks!!

[InsecureSpike]

@virg1 yup all will work perfect, fella

[virg1]

Fantastic! Thank you for the quick reply.

[InsecureSpike]

@virg1 said in Attract Mode with RetroPie - Alternative to EmulationStation:

Fantastic! Thank you for the quick reply.

just in your emulator configs edit the files location to where you have yours

[A Former User]

Ok, so I am having a problem with my version of attract mode + retropie.
I am using v0.5.
I have a Raspberry Pi 3 Model B and a Samsung SD Card with 16 GB of Storage.
For some reason, whenever I get onto this screen (shown below), and click on something, it redirects me back to this screen!
What do I do?