stuck on the configurtation screen.
-
@skaterjoe25 you need to install some games. the systems will then appear or if you have you put your roms in. there In the wrong place
-
@twd so I transfed my games and now I see 3 retropies on my screen and the configuration
-
could any one help me out with this issue
-
@skaterjoe25 you are not providing enough info. Read the link I gave.
-
@buzz
so I read the link its not helping and I don't feel giving you all this information is going to help me with my stuff. I have downloaded multiple roms on my retropie and still do not see them last time I did it showed me 3 retropies is there a certain way you have to configure your system before the games show. I can do everything but play games on my retropie -
@buzz
Pi Model or other hardware: raspberry pi 3
Power Supply used: not sure
RetroPie Version Used 4.2
Built From: retropie website
USB Devices connected: keyboard
Controller used: wii u wireless controller and a keyboard
Error messages received: none just says configure on the main screen. controller works though everything works just cant play games and non of the roms I use seem to work or load on there
Log found in /dev/shm/runcommand.log (if relevant): not sure
Guide used: (Mention if you followed a guide): multiple youtube vidoes, the retro pie web site
File: (File with issue - with FULL path): no file just stuck on the configuration after the controller setup
Emulator: none
Attachment of config files: not sure
How to replicate the problem: I have downloaded the files needed for the setup then once I configure the controller on the main screen it shows configure no roms work or at least the roms that I have downloaded -
@buzz
to be a little bit more specific where it shows games downloaded it shows configure and no games downloaded -
Problem is by your description, it's hard to diag your issue. Maybe make a YouTube video of your start up to see exactly what your seeing. Have you tried USB rom transfer?
-
Let me understand this....
you set up your controller mappings at the beginning...
it goes to the strip (is it called a carousel?)
and there you see three "retropie" selections?are you are placing the roms into the correct folders?
(i.e. atari2600 roms are in the /home/pi/RetroPie/roms/Atari2600 folder)?https://github.com/retropie/RetroPie-Setup/wiki/Transferring-Roms
this will tell you how to transfer roms...on the right there is a list..pick the system you want...at the top of that page shows where to put the roms -
I am putting my roms in the correct place I put the atari2600 roms in the atari2600 folder. I am using a usb to transfer my roms. Do you have to do something to your roms before you transfer them over?
-
This post is deleted! -
I got it all figured out it turns out the roms that I were using just were not working found some that work now. thanks for the help everyone
-
Glad you got it fixed. :)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.