Guide: Advanced Controller Mappings

mediamogul

What you're looking to do is very unique, even for xboxdrv. Also, in my opinion, this device will never make a great controller, or at least one that will be worth the effort it'll take to make it work. However, I believe it would be possible to achieve both objectives in theory. However, I'm not completely sure they can be combined into one functional control scheme, as I've never attempted anything like this. First the touchpad as joystick. The map for such a thing would look something like:

/opt/retropie/supplementary/xboxdrv/bin/xboxdrv --evdev /dev/input/your-mouse-event-here \
    --evdev-keymap BTN_LEFT=KEY_PICKONE,BTN_RIGHT=KEY_PICKONE \
    --ui-axismap x1=REL_X,y1=REL_Y \
    --mimic-xpad \
    --silent

Make sure to map two mouse buttons to keys that don't already exist on the mini keyboard. At that point you would technically have two keyboards, but RetroArch will make use of them as if they were one. To find two keys that don't exist on the mini keyboard, type

/opt/retropie/supplementary/xboxdrv/bin/xboxdrv --help-key

into the command line and look for two that might work. After that, you'll need to of course map the keyboard keys you want to use in RetroArch, as well as create the udev rule mentioned in the guide at the end of section 3A. Finally, the joystick from the virtual controller will need to be mapped to the analog joystick of player one in RetroArch as well. When it's all said and done, you'll hopefully have two keyboards and a virtual XBox controller acting in tandem to control the player one events. This is a complete Frankenstein method that I believe should work, but again, I'm not positive. All in all, I'd recommend against it, as I don't think it's a great solution, but if you're really set on using this keyboard as a controller, it may be worth a shot.

javisousa20

@mediamogul
Thanks for de reply. Of course I know the difficulties of creating something like that, and I know that it isn't the best controller, but I want to use it to travel or occasional plays.
I've tried to follow your last message without success, I used the following code:

sudo killall xboxdrv

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
 --evdev /dev/input/event1 \
 --silent \
 --mimic-xpad \
 --evdev-keymap BTN_LEFT=rb,BTN_RIGHT=lb \
 --ui-axismap x1=REL_X,y1=REL_Y \

I tried again more times with different configurations but I can not find the problem so that Retropie recognizes the right and left buttons, the axis of the joystick does not seem to work either.
I used trigger-as-button iterating configurations and I thought it worked because it showed the name (end of section 3A of the guide), but at the time of mapping, it didn't recognize the same buttons either.
Although I do not expect to get it, thanks for the help!

mediamogul

@javisousa20

Try and see if all the buttons and axis are registering in the newly created joystick with jstest. The command would be:

jstest /dev/input/jsX

Where 'X' is the number of the xboxdrv-created controller.

javisousa20

@mediamogul
It give me this back

Joystick (Xbox Gamepad (userspace driver)) has 6 axes (X, Y, Rx, Ry, Hat0X, Hat0Y)
and 13 buttons (BtnX, BtnY, BtnTL, BtnTR, BtnTR2, BtnSelect, BtnStart, BtnMode, BtnThumbL, BtnThumbR, ?, ?, ?).
Testing ... (interrupt to exit)
Axes:  0:     0  1:     0  2:     0  3:     0  4:     0  5:     0 
Buttons:  0:off  1:off  2:off  3:off  4:off  5:off  6:off  7:off  8:off  9:off 10:off 11:off 12:off

And nothing testing, neither evtest.
What that it means?

mediamogul

@javisousa20

So, while the testing interface was up, you didn't get any response from using the touchpad, or from pressing the buttons?

javisousa20

@mediamogul
Exactly, I don't get any reponse. I have tested with all the controllers that enable xboxdrv without success.

mediamogul

@javisousa20

I'm afraid that may mean it's not going to work. Usually, if there's an issue, xboxdrv will simply refuse to create the virtual controller and throw an error. The fact that it is created, but has no response likely means there's nothing to troubleshoot and that the two are just not compatible.

javisousa20

@mediamogul
Well, thanks for the answer, I'll try to do some tests even though we can not do anything. The best way to test the changes is as follows?

sudo killall xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv ((...changes...))
reboot

Thanks for the help!

mediamogul

@javisousa20 said in Guide: Advanced Controller Mappings:

The best way to test the changes is as follows?

On something like this, the best advice I can give is to keep throwing ideas at the problem as you have them. Whenever I find myself in uncharted territory, trial and error is often the mother of resolution.

javisousa20

@mediamogul
Hi, I think the problem is when I reboot to initialize xboxdrv. I have tried to use the following code

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv 
 --evdev /dev/input/event1 
 --evdev-debug 
 --evdev-keymap BTN_LEFT=LB,BTN_RIGHT=RB

It give me this back when I press the BTN_LEFT, also with BTN_RIGHT

EV_KEY BTN_LEFT 1
X1:     0 Y1:     0  X2:     0 Y2:     0  du:0 dd:0 dl:0 dr:0  back:0 guide:0 start:0  TL:0 TR:0  A:0 B:0 X:0 Y:0  LB:1 RB:0  LT:  0 RT:  0
EV_KEY BTN_LEFT 0
X1:     0 Y1:     0  X2:     0 Y2:     0  du:0 dd:0 dl:0 dr:0  back:0 guide:0 start:0  TL:0 TR:0  A:0 B:0 X:0 Y:0  LB:0 RB:0  LT:  0 RT:  0
EV_KEY BTN_LEFT 1
X1:     0 Y1:     0  X2:     0 Y2:     0  du:0 dd:0 dl:0 dr:0  back:0 guide:0 start:0  TL:0 TR:0  A:0 B:0 X:0 Y:0  LB:1 RB:0  LT:  0 RT:  0

It seems that the emulation to the LB button works, but when I restart to initialize xboxdrv, the result is lost:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv 
 --evdev /dev/input/event1 
 --evdev-debug
EV_KEY BTN_LEFT 1
X1:     0 Y1:     0  X2:     0 Y2:     0  du:0 dd:0 dl:0 dr:0  back:0 guide:0 start:0  TL:0 TR:0  A:0 B:0 X:0 Y:0  LB:0 RB:0  LT:  0 RT:  0
EV_KEY BTN_LEFT 0
X1:     0 Y1:     0  X2:     0 Y2:     0  du:0 dd:0 dl:0 dr:0  back:0 guide:0 start:0  TL:0 TR:0  A:0 B:0 X:0 Y:0  LB:0 RB:0  LT:  0 RT:  0

There may be something that I am doing wrong, Do I have to write it in rc.local?

mediamogul

@javisousa20

I believe you're right. xboxdrv is allowing the map to happen without error, but when the virtual controller is produced, those buttons don't seem to be communicating as they should. If I had to guess, it may be because you're mapping a mouse event. I've never done that myself and while it's technically possible and xboxdrv doesn't complain, it's just not communicating for some reason.

javisousa20

@mediamogul
Is there any way to start xboxdrv without rebooting? Or what is the way to start the configuration of xboxdrv at start? Is it to write the code in rc.local? Because I'm having troubles in that case

mediamogul

@javisousa20

You can always kill it at any time with

sudo killall xboxdrv

When testing, you can just created a script, say in your home folder and launch it to see if it's working. If not, kill it, alter it and launch it again.

javisousa20

@mediamogul said in Guide: Advanced Controller Mappings:

@javisousa20

You can always kill it at any time with
sudo killall xboxdrv
When testing, you can just created a script, say in your home folder and launch it to see if it's working. If not, kill it, alter it and launch it again.

It would not work for what I try to get, xboxdrv does not modify the first virtual event (ex: event2, js0) if I have not used killall before, either through rc.local or a script or directly from the xboxdrv command, but that creates a new event (and new js) that does not appear in /dev /input because it always exceeds the limit of defined controllers for the driver. The problem was that I could not run xboxdrv after I had used the killall command, only if I rebooted... or I don't know how.
But I think I've got it, I should try a script like you said, but for now I've managed to make it work by making the following change in rc.local:


sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
 --evdev /dev/input/event1 \
 --silent \
 --mimic-xpad \
 --trigger-as-button \
 --evdev-keymap BTN_LEFT=LB,BTN_RIGHT=RB,KEY_CONFIG=LT,KEY_SEARCH=RT,KEY_PLAYPAUSE=A,KEY_PREVIOUSSONG=X,KEY_NEXTSONG=B,KEY_VOLUMEUP=Y,KEY_VOLUMEDOWN=back

"/opt/retropie/supplementary/xboxdrv/bin/xboxdrv" --daemon --detach --dbus disabled --detach-kernel-driver --id 0 --led 2 --deadzone 4000 --silent --trigger-as-button --next-controller --id 1 --led 3 --deadzone 4000 --silent --trigger-as-button

exit 0

The first call is my design for xboxdrv and the second one is the default one when enabling the driver from retropie config.
The problem with this method now comes from that to include that code in rc.local, when loading backpieces at the beginning, instead of entering emulationstation runs xboxdrv as expected from command line, but remains stopped in its last sentence:

Your Xbox/Xbox360 controller should now be available as:
 /dev/input/js0
 /dev/input/event2

Press Ctrl-C to quit

But I can't do nothing to quit, skip or enter in emulationstation directamente. (Or I may not know how)
I can only enter emulationstation using SSH. There I can map all the keys and buttons without problems (although I still have to try the touchpad as a joystick).
It is an advance, I would like to take advantage of your knowledge in programming that I don't have to finish polishing it, there may be more interested people.

javisousa20

@javisousa20 said in Guide: Advanced Controller Mappings:

But I can't do nothing to quit, skip or enter in emulationstation directly. (Or I may not know how)

Ok sorry, I forgot the &. Now it's working well!
When I want to use lxde desktop I can't use the keyboard or mouse, how can I end the xboxdrv process automatically when I want to access the desktop and restart it when I go back to retropie?

mediamogul

@javisousa20

So the virtual controller is preventing you from using a mouse and keyboard in lxde?

javisousa20

@mediamogul
Yes, if I run killall xboxdrv, I can control it normally again

mediamogul

@javisousa20

Well, as you know, the guide covers a method for starting and stopping xboxdrv maps using the runcommand-onstart/end scripts, but I don't think they come into play for lxde. I've never enabled lxde on my own setup, but I assume a script is created to launch it, located in the RetroPie menu. Making sure to work from a copy of that, you could try altering it to kill xboxdrv at the beginning of the script and relaunching it at the end.

javisousa20

@mediamogul
Thanks, I got what I wanted!
This is for runcommand-onstart.sh

#!/bin/sh

### Set variables for your joypad and emulator
### Basic Configuraions - Standard controller mappings

minikbd="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
--evdev /dev/input/by-id/usb-6901_2701-if01-event-mouse \
--silent \
--mimic-xpad \
--trigger-as-button \
--evdev-keymap BTN_LEFT=LB,BTN_RIGHT=RB,KEY_CONFIG=LT,KEY_SEARCH=RT,KEY_PLAYPAUSE=A,KEY_PREVIOUSSONG=X,KEY_NEXTSONG=B,KEY_VOLUMEUP=Y,KEY_VOLUMEDOWN=back \"

### Kill Command
xboxkill="sudo killall >/dev/null xboxdrv"

### Execute the driver with the configuration you need
# $1 is the name of the emulation, not the name of the software used
# it is intellivision not jzintv
case $1 in
        emulationstation)
                $xboxkill
                joycommand="$minikbd &"
                eval $joycommand
        ;;
        kodi)
                $xboxkill
        ;;

        lxde)
                $xboxkill
        ;;

esac

And this one for runcommand-onend.sh

#!/bin/sh
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >/dev/null \
--evdev /dev/input/by-id/usb-6901_2701-if01-event-mouse \
--silent \
--mimic-xpad \
--trigger-as-button \
--evdev-keymap BTN_LEFT=LB,BTN_RIGHT=RB,KEY_CONFIG=LT,KEY_SEARCH=RT,KEY_PLAYPAUSE=A,KEY_PREVIOUSSONG=X,KEY_NEXTSONG=B,KEY_VOLUMEUP=Y,KEY_VOLUMEDOWN=back \
&

I would like to start from Kodi or Desktop, but if I delete the xboxdrv configuration in rc.local, I can not start xboxdrv when I press exit to enter in emulationstation. It does not work either leaving it in rc.local because it starts desktop/kodi with xboxdrv and does not allow me to use normal controls. Is there any chance of making a change in autostart.sh or in runcommand-onstart.sh to autostart running through runcommand?

On the other hand, I can't emulate the axes of the joystick, the REL_X / Y events go approximately from -60 to 60 depending on the speed with which I move on the touchpad, but I can not get them to work either by calibration, can it be a problem defining them using --ui-axismap?

Thank you very much!

mediamogul

@javisousa20 said in Guide: Advanced Controller Mappings:

I can not start xboxdrv when I press exit to enter in emulationstation.

I suppose you could create a script that can be selected from within lxde that would kill the desktop environment and launch xboxdrv, as well as Emulation Station if necessary. The same can actually be done from within Kodi but it's not as straightforward. You'll need to do some research on script addons, or even ways to add scripts as menu items.

On the other hand, I can't emulate the axes of the joystick, the REL_X / Y events go approximately from -60 to 60 depending on the speed with which I move on the touchpad, but I can not get them to work either by calibration, can it be a problem defining them using --ui-axismap?

I believe defining the outer deadzones as defined in the guide should take care of that. Have you given that a go?