Update of AdvanceMame did not work?

sirhenrythe5th

System: fresh install of Retropie 4.4.1 on a Raspberry Pi3+ without any modifications or changes.

Yesterday i updated AdvanceMame 3.7 to AdvanceMame 3.8 by going the ordinary way: Retropie_setup.sh -> optional packages -> AdvanceMame -> update from Binary.

Everything went well, no error messages or something like that.
After a Reboot i did not recognize any changes (i.e. Better Sound in Ataris Star Wars), so i opened the TAB-Menue and what i saw, and still see, is v3.7.

It's not the first time i updated AdvanceMame, but the first time that it did not seem to work.
Anyone got an idea?
Will it be better when i update everything as soon as Retropie itself is updated to 4.4.2 because the "update all packages" should work better?

dankcushions

@sirhenrythe5th the binary is not always the latest version. you should update by source to get the very latest.

this will take 1+ hrs for advmame

sirhenrythe5th

@dankcushions i see, will do that, thanks a lot!

Just to get sure: this is also the point even if the messages in the terminal during the installation talk about v3.8?
However, i will update from source as soon as im at home again 😊

Thanks again and nice sunday evening!!! 👍😎

sirhenrythe5th

Just a small update: i still got no luck updating AdvanceMame to 3.8.

I tried to update from source. Seemed to work, but was finished within 2 Minutes....
Result was that i could not start any rom anymore.
I had a look in the log and it told me that the Mame ececutable was not there anymore.
So i updated from Binary once again and it worked again, but still under Version 3.7.

Last week i updated Retropie to 4.4.2.
Everything worked great: emulationstation is on higher Version now, retroarch is on 1.7.3. and so on.
Only AdvanceMame stays on 3.7.
I will continue to solve this problem next week, will Check where the Files of 3.8 get installed to, i think something has changed concerning the paths.

mitu

@sirhenrythe5th said in Update of AdvanceMame did not work?:

I will continue to solve this problem next week, will Check where the Files of 3.8 get installed to, i think something has changed concerning the paths.

No, they haven't changed. Try to update from source and then check the build log in /home/pi/RetroPie-Setup/logs- pick the last log file there and upload its contents to pastebin.com to see the error.

mediamogul

@sirhenrythe5th

When you try to exit the emulator, does the confirmation window have options for saving and loading a state? If so, you're actually on 3.8. Anecdotally, I noticed something similar with 3.7, where it was identified as being 3.6 in the menu and when the version number was requested from the command line. However, I had all the features that 3.7 was supposed to have, so I just assumed it was a versioning error of some sort.

sirhenrythe5th

@mediamogul maybe, that would make sense.

I had this exit menu with the options of saving and loading save states, but changed it in the config-file (secureexit=0) because i did not want that.
I am a highscore-hunter and dont want me or other s using my image cheat this way.

This option was introduced with 3.7, so it does not affect 3.8.
But nethertheless, i also thought that maybe Andrea (the creator of AdvanceMame) has forgotten to make 3.8 visiable in the latest update.

mediamogul

@sirhenrythe5th said in Update of AdvanceMame did not work?:

This option was introduced with 3.7, so it does not affect 3.8.

Ah, you're right. In fact, those were likely the features I used to visually identify 3.7 from 3.6 in the first place.

sirhenrythe5th

@mitu said in Update of AdvanceMame did not work?:

@sirhenrythe5th said in Update of AdvanceMame did not work?:

I will continue to solve this problem next week, will Check where the Files of 3.8 get installed to, i think something has changed concerning the paths.

No, they haven't changed. Try to update from source and then check the build log in /home/pi/RetroPie-Setup/logs- pick the last log file there and upload its contents to pastebin.com to see the error.

Will do that, thank you Mitu!!!!

In the end this update is not that important, i was just interessted because the sound of Star Wars and others shall be better. But it is the first time that an update does not seem to go right, so i stuck my teeth in 😊

Thank you an Mogul for the help!!! 👍😎

mitu

Actually, there is a problem and it's good you've caught it. Building the latest 3.8, compilation fails with

[..]
obj/mame/linux/blend/advance/linux/mevent.o
obj/mame/linux/blend/advance/linux/jevent.o
advance/linux/jevent.c: In function 'joystickb_setup':
advance/linux/jevent.c:413:25: fatal error: joverride.dat: No such file or directory
 #include "joverride.dat"
                         ^
compilation terminated.
advance/emu.mak:570: recipe for target 'obj/mame/linux/blend/advance/linux/jevent.o' failed
make: *** [obj/mame/linux/blend/advance/linux/jevent.o] Error 1
[...]

but the install script doesn't detect the compilation failed and then moves over to the install && configure steps, thinking the installation succeeded.
Will see how to fix that.

EDIT: Reported also at https://sourceforge.net/p/advancemame/discussion/313512/thread/e394fb57/

sirhenrythe5th

@mitu great you caught it, thank you so much!! 😎

mitu

Jools updated the scripmodule and the installation from source should work now. I don't know if the binary package was also updated. As @dankcushions said, the compilation from will take some time..

stoney66

I can confirm that binary build is still 3.7 but it's fixed a lot of my graphic size issues wish I tried it sooner!

Build from source still not working for me.

obj/mame/linux/blend/advance/linux/event.o
advance/linux/jevent.c: In function 'joystickb_setup':
advance/linux/jevent.c:413:25: fatal error: joverride.dat: No such file or directory
 #include "joverride.dat"
                         ^
compilation terminated.
advance/emu.mak:570: recipe for target 'obj/mame/linux/blend/advance/linux/jevent.o' failed
make: *** [obj/mame/linux/blend/advance/linux/jevent.o] Error 1
make: *** Waiting for unfinished jobs....
/home/pi
/opt/retropie/emulators/advmame /home/pi

= = = = = = = = = = = = = = = = = = = = =
Configuring 'advmame' : AdvanceMAME v3.8
= = = = = = = = = = = = = = = = = = = = =

/home/pi

Log ended at: Mon Jul 23 10:04:24 PDT 2018
Total running time: 0 hours, 1 mins, 18 secs

mitu

Update your Retropie setup script first, then install from source.