PiFBA Control issues

[bananapi761]

@BuZz Updating seems to work, but stops somewhere, I can't remember where. The joystick works in ES and all other emulators. Also, after part-updating, I re-entered all the controls in ES and the config for PiFBA changed itself, but the Y axis still doesn't work.

[whemming]

I have the same issue as OP. up/down does not work in pifba. jstest verified up/down is axis 3.

fba2x.cfg

[Joystick]

Get codes from "jstest /dev/input/js0"

from package "joystick"

Defaults to XBOX 360 Controller

A_1=0
B_1=1
X_1=3
Y_1=4
L_1=4
R_1=5
START_1=6
SELECT_1=7
#Joystick axis
JA_LR=0
JA_UD=3

All buttons work fine, only issue is JA_UD=3? Any ideas? I'm running latest retropie

[BuZz]

Might be a limitation/bug with pifba - for now I can only recommend to use another emulator, or use another joypad.

@whemming please format your posts if posting config files - https://retropie.org.uk/forum/topic/3/read-this-first

[norris_309]

Any luck sorting this? I have the exact same problem
It's so annoying, the only game I wanted this retropie for only works in pifba but the UP/|Down doesn't work on my joystick! (zero delay encoder with joystick & buttons connected to piZero)

The joystick works with all the other emulators, just not pifba

[josue9423]

I had the same problem, I solved it by adding the number of each player.

[Joystick]

#Get codes from "jstest /dev/input/js0"
#from package "joystick"
#Defaults to XBOX 360 Controller
A_1=1
B_1=0
X_1=2
Y_1=3
L_1=7
R_1=6
START_1=9
SELECT_1=8
#Joystick axis
JA_LR_1=0
JA_UD_1=3
#player 2 button configuration
A_2=1
B_2=0
X_2=2
Y_2=3
L_2=7
R_2=6
START_2=9
SELECT_2=8
#Joystick axis
JA_LR_2=0
JA_UD_2=3

[BuZz]

@josue9423 if posting configs to the forum, please wrap them in a code block for easier reading (also stops data being lost as characters may be interpreted as markdown) see http://commonmark.org/help/

[AHumanWolverine]

I'm having the same problem and have added the player numbers to the axis numbers. Still nothing. I even copied what the keyboard uses (since that works)

LEFT_1=3
RIGHT_1=2
UP_1=1
DOWN_1=4

Still nothing!

[ultranano]

@josue9423 works fine with this config on "Dragon rise USB Joystick" but i have to invert connectors up/down for the joystick

[AHumanWolverine]

Can anyone confirm that Pi FBA works with the GP-Wiz40? It works fine with MAME and console emulators but not pifba. All my Roms worked great on the NeoGeo emulator on Pi B+, now I move everything over and they don't run on the neo geo emulator, only on pifba, but the up, down, left, right controls will not work on pifba. I've tried changing the config file to everything I can think of.

[crumbs]

@ultranano has this been fixed? I also have a DragonRise Joystick and up and down is inverted. I cannot switch the up down wires without desoldering the connector. It's just a hassle...

Is there another way to invert the axis?
I read somewhere changing from JA_LR_1=0 to JA_LR_1=-0 but this didn't work.