DOSBox and RetroPie.
-
Ok. Trying to "Install from source"... We'll see.
-
@ignatius All optional packages should have a binary update/install option - don't you have that option ?
-
No, I don't. :(
-
@ignatius usually if you dont have a binary it means you arent connected to the internet. But you havent said if the source was installing. Which dosbox are you installing?
-
I've tried two different WiFi Servers. No luck with either.
-
Could it possibly be a permissions error?
-
@ignatius have you tried clicking on update retropie-setup? What happens? 2 things i have seen are biggest issues. No wifi or your clock settings are wrong.
-
Ok. I sovled it. It turned out that my router was blocking my RPi. Thanks to everyone for their insight.
-
Now, one last question before I close this thread. I'm trying to transfer my RPi instalation from a 16GB card to a 32GB card. I formatted just as I did my 16GB card, partitioned the same, etc, but it just isn't working. I know that the RPi requires that the first partition needs to be FAT32 formatted, and the second partition needs to be formatted ext4 Linux. I copied my installation over, but it just isn't booting. Does the RPi Zero W not support 32GB cards, or what?
Thanks to everyone.
-
@ignatius You can just create a backup image from your existing SD card, then write it - with Etcher/Win32Diskimager - on your new SD card. It should work as long as the Pi model is the same.
Afterwards, you can go intoraspi-config(which you can start from the RetroPie menu) and use the Expand filesystem option to fill up the rest of your 32Gb card. -
Awesome. Thank you. :)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.