Two Thoughts: Auto-boot RetroPie into a Game / into a Slideshow

OneSwitch

@mitu Thanks for this clarification. I tried moving gorf.zip + configs into the Arcade folder (works fine there manually) so I could more closely mimic what you suggested. Still not working for me. Don't know if it makes any difference but my system starts up within "Collections". A possible pathway issue? Also, is it right that there are spaces in the /opt/retropie/supplementary.... line?

mitu

@OneSwitch There might be a typo in my 1st command. Instead of

/opt/retropie/supplementary/runcommand/runcommand.sh 0_SYS_ arcade ~/RetroPie/roms/arcade/tmnt.zip

it should be

/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade ~/RetroPie/roms/arcade/gorf.zip

Other ES settings shouldn't affect this command, since it's run outside of Emulationstation.

BJRetro

Also what emulator are you running gorf with? I swear I read a thread recently and there were some kinds of issues with that game or someone was saying there were issues with that game running with standard emulators. I use Lr-mame2003 for tmnt. If it doesn’t work for you after what mitu just said maybe try with a different rom first that you run using standard lr-mame2003 so you can at least test whether it is the command or the rom/emulator combo.

OneSwitch

I tried a few times, using gorf with libretro mame 2003, and 2010 (2003 is the really sluggish one for Gorf).... No luck, nothing auto boots. I also find that if I edit that file too many times, I'm getting a "Error reading lock file /opt/ ... (not sure of the end as on the vertical CRT I'm getting the leftmost and rightmost sides chopped off in the terminal editing part).

Thanks for trying to help me. It would be brilliant to get this sussed for 4.4 or newer.

mitu

@OneSwitch In order for the 'auto-boot' to work, you first have to make the game work normally - from ES, using the Runcommand menu to choose the right emulator for the ROM. After that, using the Runcommand from the auto-start script will run the game normally - using the chosen emulator. If this part is not working, then the 'auto-boot' will not work.

OneSwitch

@mitu said in Two Thoughts: Auto-boot RetroPie into a Game / into a Slideshow:

you first have to make the game work normally - from ES, using the Runcommand menu to choose the right emulator for the ROM. After that, using the Runcommand from the auto-start script will run the game normally - using the chosen emulator. If this part is not working, then the 'auto-boot' will not work.

Not quite sure what you mean. The test gorf.zip rom works in Emulation Station/RetroPIe when I select it manually as I would any other game with a joypad. Works in Mame 2003 and 2010 libretro.

Do you mean starting the game after pressing F4?

mitu

@OneSwitch said in Two Thoughts: Auto-boot RetroPie into a Game / into a Slideshow:

Not quite sure what you mean. The test gorf.zip rom works in Emulation Station/RetroPIe when I select it manually as I would any other game with a joypad. Works in Mame 2003 and 2010 libretro.

I mean if the game doesn't run normally, it would also not run during 'auto-boot' - this is what @BJRetro was referring also (I think).

Do you mean starting the game after pressing F4?

That's something you can try with the runcommand command from the autostart.sh file, to verify that it works.

BJRetro

@mitu @OneSwitch yes, mitu was right about what I meant. In any event OneSwitch here is an alternative see if it works for you since you are running gorf with Lr-mame and the rom is in the arcade folder and it works from emulation station. Content of the autostart.sh:

(All one line, no line breaks): /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS mame-libretro ~/RetroPie/roms/arcade/gorf.zip && emulationstation —no-splash #auto

Before no splash that big dash is two hyphens. Make sure you accurately capture where there are spaces. The SYS in italics just has two underscores before and after it with no spaces as in @mitu’s example.

If this does not work for you I am at a loss as it is the exact contents of my autostart file. I just pulled it up.

cyperghost

@BJRetro

(All one line, no line breaks): /opt/retropie/supplementary/runcommand/runcommand.sh 0 SYS mame-libretro ~/RetroPie/roms/arcade/gorf.zip && emulationstation —no-splash #auto

Before no splash that big dash is two hyphens. Make sure you accurately capture where there are spaces. The SYS in italics just has two underscores before and after it with no spaces as in @mitu’s example.

That's bad! If the ROM would fail to load than emulationstation will also not start. Furthermore the command switch are two dashes....

@OneSwitch
This will run the emulator setted up. I don't know what's your config now! (arcade, mame, check pathes and emulator call on yourself ....) - I think @mitu suggested more correct of your current config so I took his command line.

wait command could be usefull (you can try to remove it)

# you suggested
#/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ mame-libretro ~/RetroPie/roms/mame-libretro/gorf.zip
# mitu suggested
/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade ~/RetroPie/roms/arcade/gorf.zip
wait $!
emulationstation --no-splash #auto

OneSwitch

It works!!

Thank you both so much for sticking with me. I'm not quite sure what the precise issue was but having the gorf.zip in arcade,

(0) Drop gorf.zip in the arcade folder, with MAME2010 config files.
(1) Go to terminal (F4 on keyboard)
(2) Type sudo nano /opt/retropie/configs/all/autostart.sh
(3) Edited as follows...

/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ arcade ~/RetroPie/roms/arcade/gorf.zip
wait $!
emulationstation --no-splash #auto

(4) CTRL+X > yes to save and return to save as the file name is suggests.
(5) Restart the Pi.
(6) Gorf auto loads.

Thanks so much. I'll get this working for Space Invaders, ideally once I've found a way to flip the screen so that it works in a mirror so I can use a CRT monitor vertically. That would be so nice. Then I can flick my arcade on at the wall, and have it all auto-boot.

Huge thanks again, I really appreciate it. Excellent community here.

OneSwitch

Trying to do the same with advmame 0.94 (to autoboot Asteroids), but finding the game hangs at the title-screen, or I get a blank screen. I managed once to get the game working by pressing some keys on a keyboard, but mostly, it fails to start.

Advmame 0.94 is the only emulator that runs Asteroids well I've found (good resolution, and no lag on the sound effects). Would love to get this working.

OneSwitch

@OneSwitch Think it was running in 1.4. Changed to 0.94 and it's working now. Had to use Filezilla to get into the autostart.sh file to edit it via a PC, as the system had locked up.

IanDaemon

@OneSwitch said in Two Thoughts: Auto-boot RetroPie into a Game / into a Slideshow:

...so that it works in a mirror...

Did you try display_rotate in config.sys? I found this explanation on the web:

"Can be used to rotate or flip the screen orientation; the default value is 0.
display_rotate result
0 no rotation
1 rotate 90 degrees clockwise
2 rotate 180 degrees clockwise
3 rotate 270 degrees clockwise
0x10000 horizontal flip
0x20000 vertical flip
Note that the 90 and 270 degree rotation options require additional memory on the GPU, so these won't work with the 16MB GPU split.
You can horizontally flip the display by adding
display_rotate=0x10000"

I use "display_rotate=1" at home for my arcade cocktail cabinet.

OneSwitch

@IanDaemon Thanks, Ian. This doesn't work on a CRT monitor (at least not with Pi2Scart). More here: