Juyao Dual Arcade 2 player on Ubuntu

mitu

@Dennis said in Juyao Dual Arcade 2 player on Ubuntu:

ps: I have one other issue with this controller, i can set it up in the input configuration.. but when i am done in the menu (cant get to a game) if i ie: press down, it doesnt go down 1 step but flipt out and goes all the way to the last option.. any idea?

What controller is this ? A lot of arcade kits have the same chip and the same name.
Are you referring to the joystick up/down movements ?

Dennis

@mitu i didnt buy it originaly myself... they are identified as 'Juyao Dual Arcade'.. yeah up and down, but also left and right... i don't know how to explain in english (dutch myself) but after configuration it goes all spastic.. doing one click to the left in real life. make the menu skip like 3 or 4 clicks... in the retropie menu doing one click down makes it skip the the last option... if i go to the retropie setup menu, where you can add emulators and update the script etc, i can use the controller just fine

mitu

Have you mapped the joystick axis as D-Pad buttons or as Analog controls ?

Dennis

@mitu d-pad is the first option right?? that one then

Dennis

by the way... i did what you said in your first post, pressen ctrl+c to save the file... restarted retropie but it still says one controller found... although it doesnt work any good as described above

Dennis

@mitu ok i think the problem lies that i cant get it to work to show 2 controllers.... if i test it using jtest both controllers work as one resulting in multiple clicks...

mitu

Please run cat /proc/bus/input/device from the command line and post the output here.
Are you sure you saved the options file correctly ? Ctrl+C does not save the file, Ctrl+O saves it (or you can use Ctrl+X to exit and you'll be prompted to save the file). Did you restart after creating the file ?

Dennis

if i run that from the terminal it says path does not exist.... i think thats also the problem with the: sudo nano /etc/modprobe.d/rp-usbhid-quirks.conf file? which is indeed saved now but doesnt work.... i have ubuntu running

mitu

@Dennis said in Juyao Dual Arcade 2 player on Ubuntu:

if i run that from the terminal it says path does not exist..

Yes, it's missing a letter:

cat /proc/bus/input/devices

Dennis

@mitu ahhhh lol.. i also have a xbox one hooked up:
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input8
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100017
B: KEY=fff 0 4200108fc32e 237605100000000 0 700158000 419200004001 8e968000000000 10000000
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=045e Product=02d1 Version=0203
N: Name="Microsoft X-Box One pad"
P: Phys=usb-0000:00:14.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input9
U: Uniq=
H: Handlers=event8 js0
B: PROP=0
B: EV=20000b
B: KEY=7cdb000000000000 0 0 0 0
B: ABS=3003f
B: FF=107030000 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=0314 Product=0328 Version=0110
N: Name="D_R_M JUYAO Dual Arcade"
P: Phys=usb-0000:00:14.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:0314:0328.000E/input/input26
U: Uniq=
H: Handlers=event4 js1
B: PROP=0
B: EV=1b
B: KEY=3fff000000000000 0 0 0 0
B: ABS=30027
B: MSC=10

I: Bus=0003 Vendor=046d Product=c077 Version=0111
N: Name="Logitech USB Optical Mouse"
P: Phys=usb-0000:00:14.0-3.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C077.000F/input/input27
U: Uniq=
H: Handlers=mouse0 event5
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=903
B: MSC=10

I: Bus=0003 Vendor=03f0 Product=034a Version=0110
N: Name="Chicony HP Elite USB Keyboard"
P: Phys=usb-0000:00:14.0-3.4/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4:1.0/0003:03F0:034A.0010/input/input28
U: Uniq=
H: Handlers=sysrq kbd event6 leds
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=03f0 Product=034a Version=0110
N: Name="Chicony HP Elite USB Keyboard System Control"
P: Phys=usb-0000:00:14.0-3.4/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4:1.1/0003:03F0:034A.0011/input/input29
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=13
B: KEY=c000 10000000000000 0
B: MSC=10

I: Bus=0003 Vendor=03f0 Product=034a Version=0110
N: Name="Chicony HP Elite USB Keyboard Consumer Control"
P: Phys=usb-0000:00:14.0-3.4/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4:1.1/0003:03F0:034A.0011/input/input30
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=1f
B: KEY=3f000300ff 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c000 677bfad9415fed 9ed68000004400 10000002
B: REL=1040
B: ABS=100000000
B: MSC=10

mitu

Ok, so this looks according to the docs about this controller:

I: Bus=0003 Vendor=0314 Product=0328 Version=0110
N: Name="D_R_M JUYAO Dual Arcade"
P: Phys=usb-0000:00:14.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:0314:0328.000E/input/input26
U: Uniq=
H: Handlers=event4 js1
B: PROP=0
B: EV=1b
B: KEY=3fff000000000000 0 0 0 0
B: ABS=30027
B: MSC=10

If you run cat /etc/modprobe.d/rp-usbhid-quirks.conf (assuming this is the module options file you created with nano), what's the output ?

Dennis

@mitu said in Juyao Dual Arcade 2 player on Ubuntu:

cat /etc/modprobe.d/rp-usbhid-quirks.conf

options usbhid quirks=0x0314:0x0328:0x040

ps: something that makes it maybe weirder... my friend has a raspberry pi and it works on that... also works on windows (using a different emulator) but i got a mini pc with ubuntu i want to add in my arcade cabinet

mitu

@Dennis said in Juyao Dual Arcade 2 player on Ubuntu:

options usbhid quirks=0x0314:0x0328:0x040

This looks correct, matching your device. I don't know why this isn't applied. You can check if the quirks parameter is applied by running

cat /sys/module/usbhid/parameters/quirks

I assume you've rebooted the system after adding the file.

Dennis

@mitu when i run that it gives me:
(null),(null),(null),(null)

ps: i used this to install retropie:
https://markontech.com/linux/how-to-install-retropie-on-ubuntu-tutorial/

mitu

@Dennis said in Juyao Dual Arcade 2 player on Ubuntu:

@mitu when i run that it gives me:
(null),(null),(null),(null)

This means the quirks didn't apply. It's strange - I wonder if the usbhid module is built-in. What version of Ubuntu are you using ?

Dennis

@mitu Ubuntu 18.04.3 LTS, the latest.. clean install yesterday
do I need to run the terminal as admin?

mitu

Usually, if there's something needing admin rights - like loading/unloading module - it'e enough to add sudo before the command to run it as admin.

I don't have any more ideas what to check.
You can manually unload the driver (sudo rmmod usbhid), then load it with the quirks parameter set

sudo modprobe usbhid quirks=0x0314:0x0328:0x040

then check again if your encoder is detected as 2 gamepads.

Dennis

@mitu said in Juyao Dual Arcade 2 player on Ubuntu:

sudo modprobe usbhid quirks=0x0314:0x0328:0x040

you sire... are my new GOD!!... thank you so,so much... this DID the trick... it shows as 2 players AND no more spastic movement in menu! I need to get roms on there and see if all still works.. but i will let you know!

thanks a million times

mitu

.. this DID the trick ..

The command should be the equivalent of setting the module options (usbhid.quirks) with the .conf file, so I don't understand why it's not working via configuration, but it works from the command line (?).

Dennis

@mitu yeah it does, but does this mean i have to run it each time? Because that wouldn't be the best lol

Isn't the problem the line I added?
options usbhid quirks=0x0314:0x032..... etc
Because via the command line I did not use the 'options' text