OpenBOR 6xxx OpenBeta Testphase
-
@A-Bored-Ninja No the PAK extraction is only used for the scriptmodule delievered with retropie ;) But it makes easy things just complicated :)
So just set your PAKs to
~/RetroPie/roms/ports/openbor -
@cyperghost said in OpenBOR 6xxx OpenBeta Testphase:
@A-Bored-Ninja No the PAK extraction is only used for the scriptmodule delievered with retropie ;) But it makes easy things just complicated :)
So just set your PAKs to
~/RetroPie/roms/ports/openborGreat! Thank you so much!
Now I'll have to give it a whirl and see what happens. Hopefully the controller mapping isn't too difficult. Haha.
-
Hi!!! I discovered that in the latest version of retropie 4.6 on a raspberry pi 3b/3b+ the installation works fine through retropie-setup-> experimental packages, but in a raspberry pi 4 with fresh image of retropie 4.6 the package does not appear under experiment packages ... would anyone know why it is ? It is possible that the reason is because it is a beta and does not allow to do this type of installation? I don't know what differences there will be in this sense between a rpi3 and a rpi4. I can't find info about it or I haven't been able to find it. Thanks in advance
-
Hello, I would install openbor 6XXX on my pi 4 in retropie 4.6 and it's not good for me too. The path may change in the 4.6, so i don't know how to make appear opb6xxx in experimental packages
-
I've noticed an odd bug in OpenBOR 6xxx that the regular OpenBOR doesn't have: when I try to scroll the list of games to the next screen, OpenBOR shuts down. I thought it was e.g. a corrupt PAK file, but it seems to happen regardless of how many there are.
By the way, everyone with OpenBOR needs this :)
-
@BazzCatt hahaha, He-man is an awesome game!! What do you mean with trying to scroll to the next screen? Openbor-6xxx is launched through the emulationstation menu and does not have its own menu like normal Openbor. Maybe you are launching the games through openbor-3400?
-
@wsamael Hi!!! To make the module appears again in experimental packages you have to edit the script after downloading, find where it says
rp_module_flags = "! Mali! X11! Kms"and remove the! Kms flag. The result would be the following
rp_module_flags = "! Mali! X11"Then load retropie-setup again and you will see that in experimental packages it reappears
-
@julenvitoria
for openbor 6xxx ???
Which file script do u edit ? -
@janderclander14 You must compile the libGL.so.1 file for your raspberry pi 4, otherwise it will return to ES because it is compiled for rpi 3 / 3B +... Clone this repo to your rpi 4 and compile it following the instructions for raspberry. After compiling it you will find that it still doesn't work ... well, if you take a look at issue 129 you will see that you need to do make with -j4. The code to like in RPi 4 should be like this:
mkdir build; cd build; cmake ..; make -j4I have also tried this other
mkdir build; cd build; cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo; make -j4Both work but I need to do more checks to know which one works better or what affects not having the flag -DBCMHOST=1 (I'm a little noob...). Now the problem is that pak games run well but on a very small portion of the screen and I am not able to run them fullscreen. @cyperghost @mitu Sorry to bother you but ... could you tell me how to run them full screen? (Or anyone here ...) Really I don't have much idea if it can be possible either but I hope so...
Sorry for my english but it's not my language...
-
@shavecat Yes!!! Openbor 6xxx... The script is the one that created cypherghost. The steps should be the following:
wget http://raw.githubusercontent.com/crcerror/OpenBOR-63xx-RetroPie-openbeta/master/scriptmodules/openbor-6xxx.sh -O- | tr -d '\r' > /home/pi/RetroPie-Setup/scriptmodules/ports/openbor-6xxx.sh nano ~/RetroPie-Setup/scriptmodules/ports/openbor-6xxx.shand remove the !Kms flag in
rp_module_flags = "!Mali !X11 !Kms"The result would be the following:
rp_module_flags = "!Mali !X11"Save & exit with ctrl-x, run retropie setup again and go experimental packages ;)
-
@julenvitoria
Thanks a lot :) -
@julenvitoria said in OpenBOR 6xxx OpenBeta Testphase:
@janderclander14 You must compile the libGL.so.1 file for your raspberry pi 4, otherwise it will return to ES because it is compiled for rpi 3 / 3B +... Clone this repo to your rpi 4 and compile it following the instructions for raspberry. After compiling it you will find that it still doesn't work ... well, if you take a look at issue 129 you will see that you need to do make with -j4. The code to like in RPi 4 should be like this:
mkdir build; cd build; cmake ..; make -j4I have also tried this other
mkdir build; cd build; cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo; make -j4Both work but I need to do more checks to know which one works better or what affects not having the flag -DBCMHOST=1 (I'm a little noob...). Now the problem is that pak games run well but on a very small portion of the screen and I am not able to run them fullscreen. @cyperghost @mitu Sorry to bother you but ... could you tell me how to run them full screen? (Or anyone here ...) Really I don't have much idea if it can be possible either but I hope so...
Sorry for my english but it's not my language...
Because I am stupid I did not take into account that openbor games can be configured from VIDEO OPTIONS to run full screen ... LOL
-
@julenvitoria Thanks a lot for the tips. I was able to build the gl4es lib for the RPI4 and this made OpenBor run. However, I tried Streets of Rage 2X and the game crashes just after the "start" screen. This is the runcommand log, if it is of any help
LIBGL: Error while gathering supported extension (eglInitialize: EGL_NOT_INITIALIZED), default to none LIBGL: Initialising gl4es LIBGL: v1.1.3 built on May 9 2020 23:34:30 LIBGL: Using GLES 2.0 backend LIBGL: loaded: libGLESv2.so LIBGL: loaded: libEGL.so LIBGL: Using GLES 2.0 backend LIBGL: Targeting OpenGL 2.1 LIBGL: WARNING, No Limited or Full NPOT support in hardware, Forcing NPOT have no effect! LIBGL: Not trying to batch small subsequent glDrawXXXX LIBGL: try to use VBO LIBGL: glX Will try to recycle EGL Surface LIBGL: Current folder is:/opt/retropie/ports/openbor-6xxx LIBGL: Shuting down -
@janderclander14 Hi!!! I downloaded Street Of Rage 2x from here (download android PAK, inside the zip you'll found it) and it works fine for me ;)
Could you tell me the size of your libGL.so.1 file? Mine is 1595 kb and works fine on my pi 4 -
@julenvitoria Thanks, that worked! I was using the latest version of the mod (1.9.3) and for some reason it crashes. Version 1.7 works fine.
-
So i install the openbor and openbor6xxx
and trying to play it straight from the folder (ports/openbor)with *.pak file,
and it goes back to the emulitonstaion .
and from the openbor selector ports same...
any help plz? -
@julenvitoria said in OpenBOR 6xxx OpenBeta Testphase:
@janderclander14 You must compile the libGL.so.1 file for your raspberry pi 4, otherwise it will return to ES because it is compiled for rpi 3 / 3B +... Clone this repo to your rpi 4 and compile it following the instructions for raspberry. After compiling it you will find that it still doesn't work ... well, if you take a look at issue 129 you will see that you need to do make with -j4. The code to like in RPi 4 should be like this:
mkdir build; cd build; cmake ..; make -j4I have also tried this other
mkdir build; cd build; cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo; make -j4Both work but I need to do more checks to know which one works better or what affects not having the flag -DBCMHOST=1 (I'm a little noob...)
@shavecat You must compile the libGL.so.1 file for your raspberry pi 4, follow this instructions ;)
-
EDIT: [SOLVED] User error. For my configuration, I needed to move the active directory to opt/retropie/configs/ports/openbor
@julenvitoria , like others, I'm very excited about this.
I followed the instructions for Raspberry Pi4B. No trouble compiling libGL.so.1 as described with the -j4 switch. Moved the compiled file from ./lib to the /opt/retropie/ports/openbor-6xxx folder (renamed the old one first).
When running the openbor-6xxx emulator, it fails for me. Viewing dev/shm/runcommand.log shows "failed to add service - already in use?"
Example trying to launch He-Man.pak
Parameters: Executing: pushd /opt/retropie/ports/openbor-6xxx; /opt/retropie/ports/openbor-6xxx/OpenBOR "/home/pi/RetroPie/roms/openbor/He-Man.pak"; popd /opt/retropie/ports/openbor-6xxx ~ * failed to add service - already in use? LIBGL: Initialising gl4es LIBGL: v1.1.3 built on May 10 2020 20:10:23 LIBGL: Using GLES 2.0 backend LIBGL: loaded: libGLESv2.so LIBGL: loaded: libEGL.so LIBGL: Using GLES 2.0 backendRunning from the command-line works just fine. Issue occurs only when launching via ES.
EDIT: [SOLVED] User error. For my configuration, I needed to move the active directory to opt/retropie/configs/ports/openbor
-
@julenvitoria said in OpenBOR 6xxx OpenBeta Testphase:
mkdir build; cd build; cmake ..; make -j4
So im trying your bulid code both of them
but it gives me that -pi@retropie:~ $ mkdir build; cd build; cmake ..; make -j4 CMake Error: The source directory "/home/pi" does not appear to contain CMakeLists.txt. Specify --help for usage, or press the help button on the CMake GUI. make: *** No targets specified and no makefile found. Stop. pi@retropie:~/build $ mkdir build; cd build; cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo; make -j4 CMake Error: The source directory "/home/pi/build" does not appear to contain CMakeLists.txt. Specify --help for usage, or press the help button on the CMake GUI. make: *** No targets specified and no makefile found. Stop. pi@retropie:~/build/build $Does the roms going to the same place like pi3b+ in the ports openbor folder (then paks files there )
Or is it going to rom/openbor folder ... -
@julenvitoria said in OpenBOR 6xxx OpenBeta Testphase:
mkdir build; cd build; cmake ..; make -j4I have also tried this other
mkdir build; cd build; cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo; make -j4Both work but I need to do more checks to know which one works better or what affects not having the flag -DBCMHOST=1 (I'm a little noob...).
@shavecat You must first change to the directory where you cloned the gl4es repo, then run the commands...
git clone https://github.com/ptitSeb/gl4escd gl4esmkdir build; cd build; cmake ..; make -j4It will be compiled... then you must copy libGL.so.1 to the openbor-6xxx directory
cd lib; sudo cp libGL.so.1 /opt/retropie/ports/openbor-6xxxalso you can try the repo that I created ... it is a fork of the cypherghost repo but I changed the routes because I included ligbGL.so.1 for raspberry pi zero and raspberry pi 4. The structure of the repo is very different and I didn't know very well how to do it (I'm a little noob...)
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.