Which Mame is suggested for the a Pi 4 with 4GB of Ram?

arcadez2003

On the subject of bootleggers some of them were really talented and if you played a bootleg then the original version they copied you'd never notice the difference
some of them actually perform better if you play the technos version of Renegade vs the bootleg you'll notice the latter to be better as the original uses a MCU for the inputs
and many game routines like enemy attacks and movements etc etc.

This causes a delay which you'll notice as slowdown in game, the bootleggers simply dumped the contents of the MCU and set the main CPU to deal with the
the game protection routines instead which is actually less of a resource and memory hog so the bootleg is a more streamlined version of the game and plays
way better as a result.

As mentioned above some bootleggers were plain hopeless or just rip off artists, but i always found it amusing that quite alot of them after stealing someone
else's game they actually protected their bootleg so no one could steal their game, kinda like a thief robbing your house and then locking the door or window again on
the way out :)

RedMarsBlueMoon

I could not get many of the old 70s/early 80s classics to run on lr-mame2003/Pi4/RP4.6 so last night tried lr-mame2010. The first couple of rom's have been running ok although Iv'e had to turn off the crt shaders as thing were getting stuttery.
Playing R-Type still didn't seem that smooth I would have expected it to run super smooth being an old game. Not sure if its there's a faster mame that works well on the Pi4?

mitu

@RedMarsBlueMoon said in Which Mame is suggested for the a Pi 4 with 4GB of Ram?:

I could not get many of the old 70s/early 80s classics to run on lr-mame2003/Pi4/RP4.6 so last night tried lr-mame2010

Looks like you're not using the right ROM set for Mame2003.

Not sure if its there's a faster mame that works well on the Pi4?

Yes, there is - please start with https://retropie.org.uk/docs/Arcade/ to understand what options you have and how to start with arcade emulation.

Darksavior

@janderclander14 I forgot who told me that 2010 has shoddy joystick support since it's a hack or something.
I'd rather use 2003 plus if a game: is not supported on fbn or not emulated well, or it doesn't run well on 2016. 2003 does have to deal with bootleg rom sets sometimes and I'm trying to not use those anymore.

Namco psx arcade games won't even run on 2003 so don't bother. Maybe advmame might run them. I use the ps1 versions.

RedMarsBlueMoon

@mitu I'm using the 0.78 romset and I also tried all the failing roms on my PCs retroarch mame2003 and they ran perfectly there.
I inspected the roms using a 2003 dat and romcenter and it all checked out (we'll there was maybe one rom that was missing something, but still worked on the pc)

mitu

@RedMarsBlueMoon You should open a new topic and provide the info about your system, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.
An detailed emulator log should tell us more on what's the error with your ROMs.

sirhenrythe5th

to summarize the topic: there is no advantage in buying a Pi4 instead of a Pi3 concerning MAME atm, right?
When i read that games from the 70 & 80s run stuttery (w/ shaders) than you could even say: it got worse :)
All the games that did not run before with a Pi3 (Cave SH3, Sega Titan, 3D-Games,...) dont get any boost with the Pi4, so it seems that we have to wait for a fork like "MAME2019++++, super-optimized for the Pi4" or something like that :)

mitu

@sirhenrythe5th said in Which Mame is suggested for the a Pi 4 with 4GB of Ram?:

to summarize the topic: there is no advantage in buying a Pi4 instead of a Pi3 concerning MAME atm, right?

No, that's not true.

When i read that games from the 70 & 80s run stuttery (w/ shaders) than you could even say: it got worse :)

Not remotely true.

Darksavior

@sirhenrythe5th said in Which Mame is suggested for the a Pi 4 with 4GB of Ram?:

to summarize the topic: there is no advantage in buying a Pi4 instead of a Pi3 concerning MAME atm, right?

You can run a few more games full speed on fb-neo now like the taito f3 games (elevator action returns, Ninja Baseball Batman, etc) and some cave games (dodonpachi3 dai ou jou)

When i read that games from the 70 & 80s run stuttery (w/ shaders) than you could even say: it got worse :)

While the gpu drivers aren't finished (that's why there's screen tearing), it's considerably better than the pi3b+. I don't believe you can run any new shaders the pi3b+ can't support, but it's not a downgrade. For instance, I use the pegasus-frontend, and it's much smoother than a pi3b+. The dreamcast emulator redream runs just about all games at full speed with frame drops and it's exclusive to the pi4 because of its better gpu.

All the games that did not run before with a Pi3 (Cave SH3, Sega Titan, 3D-Games,...) dont get any boost with the Pi4, so it seems that we have to wait for a fork like "MAME2019++++, super-optimized for the Pi4" or something like that :)

They got a boost. Just not to a point where they're in a playable form. Like, some cave games run full speed on mame2016 until you get explosions and action which drops it to the 40s sometimes and the scratchy audio doesn't help the experience. I'm not a dev so I have no idea if these later mame's (2015,2016, etc) can get any optimizations.

sirhenrythe5th

@Darksavior said in

You can run a few more games full speed on fb-neo now like the taito f3 games (elevator action returns, Ninja Baseball Batman, etc) and some cave games (dodonpachi3 dai ou jou)

I´ve got pretty good performance with DoDonpachi 3 (&2) using FBNeo on my Pi3B+ (no overclocking).
But to be honest: there is a difference using HDMI vs. AV-Output.
When i run DDP2 & DDP3 on the HDMI (55" Bravia) you recognize stuttering - running on the CRT ...fine!
I am playing the Taito F3-Games with AdvanceMame since years, they also run well using this emulator.

I am pretty sure that all of these games will run perfect on HDMI too now with the Pi4B - but this is something that does not bother me as a CRT-Retronerd :D :D
I was more interested in the suppport of later MAME-Versions and of course more games.
I guess some more patience will be the right way ;)

barbudreadmon

@sirhenrythe5th said in Which Mame is suggested for the a Pi 4 with 4GB of Ram?:

I´ve got pretty good performance with DoDonpachi 3 (&2) using FBNeo on my Pi3B+.

Same here, not the first time i read this recently so i have been wondering if some people aren't abusing the "cpu clock" core option again. I hooked that setting into our pgm driver just a few months ago in a failed attempt to reproduce original cabinet's slowdowns (there is still something missing, probably some kind of interrupt we aren't emulating properly), so it might be worth mentioning that downclocking this would actually provide a game experience closer to the original cabinet.

Clyde

@barbudreadmon Can you recommend a particular value (range) of that setting?

Jiryn

I kinda just want to play Sunset Riders 2 player, since it lets you pick your characters.
(Green guy is my fav, best guns in the game!)

sirhenrythe5th

@Jiryn which also runs perfect with AdvanceMame as well as with FBNeo on a Pi3B+ (AFAIR it was allready great playable on the Pi2B).
FBNeo offers even cheevos for that game :)

Jiryn

@sirhenrythe5th
Sounds like a plan!
What's a good rom set for those?

See, I'm just trying to find the perfect, all around fit for the Pi 4 4GB, so I can just play 90% of the games without issue of emulator or issues.

Already slightly disappointed that it's not as big of a leap as I would have hoped on other consoles.

Jiryn

@sirhenrythe5th
Which Advance mame did you use?

.94, 104 or 3?

sirhenrythe5th

@Jiryn i always use the latest version, so i did start with 0.94 but use 3.9 at the moment ;)
The Romset required for AdvanceMame is 0.106.

Jiryn

@sirhenrythe5th
Thank you!
it says .94 for the base, I didn't know which to grab.

sirhenrythe5th

@Jiryn it is the package named just "AdvanceMame" - without version number.
This one is the current release (v3.9).

Jiryn

@sirhenrythe5th said in Which Mame is suggested for the a Pi 4 with 4GB of Ram?:

@Jiryn it is the package named just "AdvanceMame" - without version number.
This one is the current release (v3.9).

Now I am wondering if I did something wrong.
Installed Advance Mame, started it up.... looked amazing... but for some reason my controller stopped working. It wasn't registering any of my inputs.

SN30 Pro+ in Xbox/Windows mode.