Cant boot

[mitu]

If you insert the sdcard back into your PC, do you see the boot partition with the files there (config.txt, cmdline.txt, etc.) ?

[kitaek27]

@mitu yes, both txt files are there.

[kitaek27]

figure ill add a bit more info so here's the status of the 32GB boot media i made

and the txt files present in the boot partition

[mitu]

Looks like the image was written correctly on the sdcard, so that's not the problem here. Haven't seen this error yet, assuming it's not the power source, you could try updating the Pi's boot EEPROM first and try again.

[DreamcastKid]

@kitaek27 said in Cant boot:

and the txt files present in the boot partition

what i find a bit odd in the image you posted is that bootcode.bin and COPYING.linux both have file extensions ... but cmdline and config are both missing the .txt extension :/

they should look like config.txt and cmdline.txt

[mitu]

@dreamcastkid said in Cant boot:

they should look like config.txt and cmdline.txt

Windows 10, by default, hides extensions for known file types. If you look at the 3rd column, you'll see they're labeled 'Text Document' and the file type icon is a text file.

[kitaek27]

I tried the EEPROM thing. It didn't really change how the pi behaves.

I'm assuming that the flashing green light and the green screen on display means it's completed successfully. If I put the SD card in after power it on though I do get some concerning error messages.

VL805 EEPROM is up to date
recover4.elf not found (6)
recovery.elf not found (6)
start4.elf not found (6)
Firmware not found
ERROR 00000004

Not sure how relevant this is. Either way, after the whole green screen thing I tried the retropi image and its giving me the same errors in the initial post.

I was concerned that my microSD reader/writer was defective as it was having some issues, but I'm trying today on a new device that is writing smoothly. No differences.

At this point I'm thinking it's the pi itself. No blinking red light error codes though.

[kitaek27]

Update: It seems to be working.

I more or less tried everything exactly the same way I've been trying it so far, but with one minor difference.

I tried using the download and flash option from Raspberry Pi Imager, rather than the local image from the download page. I'll have to mess around with it a bit more later but for now I think its been resolved.

[DreamcastKid]

@mitu said in Cant boot:

Windows 10, by default, hides extensions for known file types. If you look at the 3rd column, you'll see they're labeled 'Text Document' and the file type icon is a text file.

oh, ok ... i'm using Windows 7 and have that setting Off because it make renaming files and extensions a pain.

[mitu]

@kitaek27 Glad you got it working.
One advantage when using the Raspberry Pi Image is that you don't need to download the image, the program will do it for you and automatically check the image file against its checksum.