new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!)

2Play

@folly
Autoload working only from a full KB. Thank you!
My little wireless kb/mouse combo not good as it needs FN key to apply F12.
works ok though on the lr-mess setup if pressed quickly :-) weird

i tried the -autoboot added to sh files but no difference. at least i know shift + f12 is working so all good

I have to say this emu has the best graphics in cli etc, second is lr-mess and last advmess. I have all 3 working.

I was reading the original README info from Graham, menu should have an EXIT option. xbeeb and xmaster do not though.
So only solution is to use mouse and click X on window to close it and go back to ES.

I tried to find where the config file exists but no luck
I wanted to boost and save volume to 100% and 70%.
Any idea?

You dont have correct resolution on yours?
Here is what I have fullscreen

And command line options from help i found

/opt/retropie/emulators/b-em-pico-pi/xbeeb --help
Starting GUI thread
main: starting B-em v-2.2?-pi_x_drm
ERROR(/home/pi/code/b-em-pico-pi/src/pico/x_gui/x_gui.cpp:641) : model: invalid rom setup type 'swram' in model 'BBC B w/1770 FDC', using 'swram' instead
B-em v-2.2?-pi_x_drm command line options:

-disc disc.ssd  - load disc.ssd into drives :0/:2
-disc1 disc.ssd - load disc.ssd into drives :1/:3
-autoboot       - boot disc in drive :0
-Fx             - set maximum video frames skipped
-s              - scanlines display mode
-i              - interlace display mode

-disc1 disc.ssd

Seems a good option to have manullay loading a dual disk game...
Make a custom sh file and add in es_systems .sh as extension . Just an idea

DTEAM

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

anyone interested i have covered most of older systems on my themes which are forks of the excellent @chicuelo work
https://github.com/2play/2Play-v2-Themes

Thanks @2play, I don't know if you are aware but @folly, @valerino and I working on the Development of module-script generator for lr-mess and mame standalone, It's the updated thread for the sciptmodules.

4 weeks ago we posted this: Request for artists working on themes - needs for (lr-mess/MAME) additions

What you did seems to be in line with that. Thanks.

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly
Autoload working only from a full KB. Thank you!

Nice.

My little wireless kb/mouse combo not good as it needs FN key to apply F12.

Damn.

works ok though on the lr-mess setup if pressed quickly :-) weird

I press it sometimes twice, then it works ok.

i tried the -autoboot added to sh files but no difference. at least i know shift + f12 is working so all good

I have to say this emu has the best graphics in cli etc, second is lr-mess and last advmess. I have all 3 working.

Yes, indeed.
Graham changed something that make this run quite good on rpi. Also the audio is pretty good.

I was reading the original README info from Graham, menu should have an EXIT option. xbeeb and xmaster do not though.
So only solution is to use mouse and click X on window to close it and go back to ES.

The readme he made is written in very hurry up way.
I had to change some built lines to compile.
I can imagine there are many mistakes in the readme still.
I saw separate gui code of Graham qui.
Perhaps it can be added in that part.

I tried to find where the config file exists but no luck
I wanted to boost and save volume to 100% and 70%.
Any idea?

I think this also has to be done in the source.
He made it in such a way that all settings, roms and demos are in the binary so it could work on the pico.

You dont have correct resolution on yours?

If I run the binaries directly I don't have correct resolution.
But it is correct if I do it thought my .sh that are installed with my module-script, then it is ok.

Here is what I have fullscreen

Just how it looks on my end.
You can force it to be wide-screen, did you see that ?

And command line options from help i found

/opt/retropie/emulators/b-em-pico-pi/xbeeb --help
Starting GUI thread
main: starting B-em v-2.2?-pi_x_drm
ERROR(/home/pi/code/b-em-pico-pi/src/pico/x_gui/x_gui.cpp:641) : model: invalid rom setup type 'swram' in model 'BBC B w/1770 FDC', using 'swram' instead
B-em v-2.2?-pi_x_drm command line options:

-disc disc.ssd  - load disc.ssd into drives :0/:2
-disc1 disc.ssd - load disc.ssd into drives :1/:3
-autoboot       - boot disc in drive :0
-Fx             - set maximum video frames skipped
-s              - scanlines display mode
-i              - interlace display mode

-disc1 disc.ssd

Seems a good option to have manullay loading a dual disk game...
Make a custom sh file and add in es_systems .sh as extension . Just an idea

Nice, I haven't done that -help part, but that is interesting.
I will look at that too.

I could make an extra sh file with-disc1 and add a command-line in the emulators.cfg that would load that sh.
Or I can change the standard sh which could search for a second disc.

Do you have an example on a 2 disc game ?
Good idea to test.

2Play

@folly Thank you for replying!
I do have wide full screen covered with your script. Thats what im using
If we can find how to save setting for sound that would be nice.
if its hardcoded then i guess no cfg file and changes are temp.

The dual disk games are rare but here is one example

Superman - Man of Steel (1989)(Tynesoft)(Disk 1 of 2)[h TSTH].ssd
Superman - Man of Steel (1989)(Tynesoft)(Disk 2 of 2)[h TSTH].ssd

2Play

@dteam Thank you! I have seen that post.
I saw the in the past the beg of the post but recently i discovered again as I decided to make all old systems work.
I ve even boosted some systems further.
Once done Im happy to share feedback

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly Thank you for replying!
I do have wide full screen covered with your script. Thats what im using
If we can find how to save setting for sound that would be nice.
if its hardcoded then i guess no cfg file and changes are temp.

The dual disk games are rare but here is one example
Superman - Man of Steel (1989)(Tynesoft)(Disk 1 of 2)[h TSTH].ssd
Superman - Man of Steel (1989)(Tynesoft)(Disk 2 of 2)[h TSTH].ssd

I have made a fork of the source, just like you did.
Perhaps I can find some hard coded stuff and change that and then use my repo.

Can't promise anything, but if I can, I will try and see if I can make a dual boot solution and fix the volume.

Edit (volume fix):
I changed the volume settings in my fork to 80%.
My module-script is set to use my fork now.

So update the module-script with the wget command in post 43 .
Install again in RetroPie-Setup.

This is the commit I did :
https://github.com/FollyMaddy/b-em/commit/8e2cfe6e335498bad89b318202b3caeb09c62e95

2Play

@folly Tx for quick handling!!
I think Ill use your fork and make it 9-10 for main and 7 for drive

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly Tx for quick handling!!
I think Ill use your fork and make it 9-10 for main and 7 for drive

I will make a commit now.

I made it 10 / 7 .

I will also make it wide-screen by default ?

2Play

@folly Sounds great yes.
how easy is it for you to add a new handler under the hard_reset so menu has an exit/quit function

PS Actually i d say leave 4:3 as ppl will complain. they can change by the aspect ratio right in menu, correct?

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly Sounds great yes.
how easy is it for you to add a new handler under the hard_reset so menu has an exit/quit function

Don't know.
Perhaps I can.

PS Actually i d say leave 4:3 as ppl will complain. they can change by the aspect ratio right in menu, correct?

Ok , I restore it after my test.
(restored)

2Play

@folly compiled and tested!
All good with volume!

about the handler i was looking at the menu.c code and seems a new entry for Exit\Quit can be added. I probably could do with testing but I think you are more advanced coder to me

The gui menu also pops up with WIN Key :-)

Folly

@2play

About the handler i was looking at the menu.c code and seems a new entry for Exit\Quit can be added. I probably could do with testing but I think you are more advanced coder to me.

For C/C++ I am not that advanced, but indeed I did some little things and I want to learn some more things.
Perhaps I can find it, then I will let you know.

Did you know how I found the settings ?
I just used the grep command in the terminal, like this :

pi@raspberrypi:~/the_source_directory $ grep -r volume

This will give all the files and lines that contain "volume".
That is the way I found the file.
So that is something you can do too.

The gui menu also pops up with WIN Key :-)

I will add this to the help in the module-script.

2Play

@folly
I think the master model not working ok or is just game related
see ABYSS booting messed up
airwolf wont boot at all on both

best compatibility is on lr-mess and the advmess
lr mess boots all games except a protoype that loads on b-em
I guess setting up a set in ES will require diff emus per games

Not a prob but just wanted to give you my feedback

Folly

@2play

Thanks for your feedback.

I noticed this also with a few demos and a few games.
I think it's b-em related.
Though, I see that some games and demos only work on b-em.
Like these :
Prince of Persia post link
Stunt Car Racer post link

With xmaster I also notice strange charachters sometimes.
Don't know what is causing this.

2Play

@folly maybe the integrated roms need updating?
dont know

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly maybe the integrated roms need updating?
dont know

Indeed, that could be the case.
We keep that in mind.

2Play

Is there a way to speed up tape loading on lr-mess electron ?
ssd not working with flop1?
is there a similar quick load as SHIFT+F12 for tapes ?

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

Is there a way to speed up tape loading on lr-mess electron ?

Use fast-forward by pressing the hotkey "space" to speed up for a while.
Don't know other methods, for now.

ssd not working with flop1?

Tested a few and all worked.
Perhaps not all files are supported.
(Press a few times shift+f12 until it loads)
.ssd should work as listed here :

/opt/retropie/emulators/mame/mame -listmedia bbcb
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
bbcb             cassette         (cass)     .wav  .csw  .uef  
                 romimage1        (rom1)     .rom  .bin  
                 romimage2        (rom2)     .rom  .bin  
                 romimage3        (rom3)     .rom  .bin  
                 romimage4        (rom4)     .rom  .bin  
                 printout         (prin)     .prn  
                 floppydisk1      (flop1)    .ssd  .bbc  .img  .dsd  .adf  .ads  .adm  .adl  .fsd  .dsk  .ima  .ufi  .360  .d77  .d88  .1dd  .dfi  .hfe  .imd  .ipf  .mfi  .mfm  .td0  .cqm  .cqi  
                 floppydisk2      (flop2)    .ssd  .bbc  .img  .dsd  .adf  .ads  .adm  .adl  .fsd  .dsk  .ima  .ufi  .360  .d77  .d88  .1dd  .dfi  .hfe  .imd  .ipf  .mfi  .mfm  .td0  .cqm  .cqi

is there a similar quick load as SHIFT+F12 for tapes ?

Read this post, you could create a similar .cmd file for a bbcmicro game :
https://retropie.org.uk/forum/topic/28345/old-computer-appreciation-thread/1025
Don't know if there is an other way though.

You can find much information on :
https://www.mamedev.org/

2Play

@folly thank you.
btw if you keep pressed the SHIFT F12 on the wireless small KB autoload works on bbem.
So far with bbc im great

My ques above all were related to electron wiht mess. Ill test the fast fwrd

By the way the Elkulator is the best for instant loading.
The official side is missing the linux binary from the zip file. I wanted to test but needs compiling.
I think i saw online that someone compiled a binary for RPi but cant find

Elkulator v1.0 Linux supplement
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Compiling
~~~~~~~~~

You will need the following libraries :

Allegro 4.x
OpenAL
ALut
Zlib

Open a terminal window, navigate to the Elkulator directory then enter

./configure
make

then ./elkulator to run.

Elkulator has been tested on x86-32 and x86-64 machines. No other architecture is guaranteed
to work, and big-endian machines (eg PowerPC) almost certainly won't work.


Linux specifics
~~~~~~~~~~~~~~~

The menu is not available all the time. Press F11 to open it, then F11 to close again.

The debugger is only available via the command line.

Hardware line doubling mode is not available on Linux.

Fullscreen mode doesn't appear to work correctly, at least on my machine. Elkulator takes over
the screen, but the resolution never changes.

Video performance is noticeably slower than on Windows. This is largely due to the lack
of hardware acceleration support in Elkulator.


Tom Walker
b-em@bbcmicro.com

I havent managed to load an ssd on electron yet

Folly

@2play

Sorry misunderstood.

Will try electron with lr-mess. (.ssd should be supported : mame -listmedia electron )
Will do some search on that Elkulator.