new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!)

2Play

@folly Sounds great yes.
how easy is it for you to add a new handler under the hard_reset so menu has an exit/quit function

PS Actually i d say leave 4:3 as ppl will complain. they can change by the aspect ratio right in menu, correct?

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly Sounds great yes.
how easy is it for you to add a new handler under the hard_reset so menu has an exit/quit function

Don't know.
Perhaps I can.

PS Actually i d say leave 4:3 as ppl will complain. they can change by the aspect ratio right in menu, correct?

Ok , I restore it after my test.
(restored)

2Play

@folly compiled and tested!
All good with volume!

about the handler i was looking at the menu.c code and seems a new entry for Exit\Quit can be added. I probably could do with testing but I think you are more advanced coder to me

The gui menu also pops up with WIN Key :-)

Folly

@2play

About the handler i was looking at the menu.c code and seems a new entry for Exit\Quit can be added. I probably could do with testing but I think you are more advanced coder to me.

For C/C++ I am not that advanced, but indeed I did some little things and I want to learn some more things.
Perhaps I can find it, then I will let you know.

Did you know how I found the settings ?
I just used the grep command in the terminal, like this :

pi@raspberrypi:~/the_source_directory $ grep -r volume

This will give all the files and lines that contain "volume".
That is the way I found the file.
So that is something you can do too.

The gui menu also pops up with WIN Key :-)

I will add this to the help in the module-script.

2Play

@folly
I think the master model not working ok or is just game related
see ABYSS booting messed up
airwolf wont boot at all on both

best compatibility is on lr-mess and the advmess
lr mess boots all games except a protoype that loads on b-em
I guess setting up a set in ES will require diff emus per games

Not a prob but just wanted to give you my feedback

Folly

@2play

Thanks for your feedback.

I noticed this also with a few demos and a few games.
I think it's b-em related.
Though, I see that some games and demos only work on b-em.
Like these :
Prince of Persia post link
Stunt Car Racer post link

With xmaster I also notice strange charachters sometimes.
Don't know what is causing this.

2Play

@folly maybe the integrated roms need updating?
dont know

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly maybe the integrated roms need updating?
dont know

Indeed, that could be the case.
We keep that in mind.

2Play

Is there a way to speed up tape loading on lr-mess electron ?
ssd not working with flop1?
is there a similar quick load as SHIFT+F12 for tapes ?

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

Is there a way to speed up tape loading on lr-mess electron ?

Use fast-forward by pressing the hotkey "space" to speed up for a while.
Don't know other methods, for now.

ssd not working with flop1?

Tested a few and all worked.
Perhaps not all files are supported.
(Press a few times shift+f12 until it loads)
.ssd should work as listed here :

/opt/retropie/emulators/mame/mame -listmedia bbcb
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
bbcb             cassette         (cass)     .wav  .csw  .uef  
                 romimage1        (rom1)     .rom  .bin  
                 romimage2        (rom2)     .rom  .bin  
                 romimage3        (rom3)     .rom  .bin  
                 romimage4        (rom4)     .rom  .bin  
                 printout         (prin)     .prn  
                 floppydisk1      (flop1)    .ssd  .bbc  .img  .dsd  .adf  .ads  .adm  .adl  .fsd  .dsk  .ima  .ufi  .360  .d77  .d88  .1dd  .dfi  .hfe  .imd  .ipf  .mfi  .mfm  .td0  .cqm  .cqi  
                 floppydisk2      (flop2)    .ssd  .bbc  .img  .dsd  .adf  .ads  .adm  .adl  .fsd  .dsk  .ima  .ufi  .360  .d77  .d88  .1dd  .dfi  .hfe  .imd  .ipf  .mfi  .mfm  .td0  .cqm  .cqi

is there a similar quick load as SHIFT+F12 for tapes ?

Read this post, you could create a similar .cmd file for a bbcmicro game :
https://retropie.org.uk/forum/topic/28345/old-computer-appreciation-thread/1025
Don't know if there is an other way though.

You can find much information on :
https://www.mamedev.org/

2Play

@folly thank you.
btw if you keep pressed the SHIFT F12 on the wireless small KB autoload works on bbem.
So far with bbc im great

My ques above all were related to electron wiht mess. Ill test the fast fwrd

By the way the Elkulator is the best for instant loading.
The official side is missing the linux binary from the zip file. I wanted to test but needs compiling.
I think i saw online that someone compiled a binary for RPi but cant find

Elkulator v1.0 Linux supplement
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Compiling
~~~~~~~~~

You will need the following libraries :

Allegro 4.x
OpenAL
ALut
Zlib

Open a terminal window, navigate to the Elkulator directory then enter

./configure
make

then ./elkulator to run.

Elkulator has been tested on x86-32 and x86-64 machines. No other architecture is guaranteed
to work, and big-endian machines (eg PowerPC) almost certainly won't work.


Linux specifics
~~~~~~~~~~~~~~~

The menu is not available all the time. Press F11 to open it, then F11 to close again.

The debugger is only available via the command line.

Hardware line doubling mode is not available on Linux.

Fullscreen mode doesn't appear to work correctly, at least on my machine. Elkulator takes over
the screen, but the resolution never changes.

Video performance is noticeably slower than on Windows. This is largely due to the lack
of hardware acceleration support in Elkulator.


Tom Walker
b-em@bbcmicro.com

I havent managed to load an ssd on electron yet

Folly

@2play

Sorry misunderstood.

Will try electron with lr-mess. (.ssd should be supported : mame -listmedia electron )
Will do some search on that Elkulator.

Folly

@2play said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly thank you.

By the way the Elkulator is the best for instant loading.
The official side is missing the linux binary from the zip file. I wanted to test but needs compiling.
I think i saw online that someone compiled a binary for RPi but cant find

I compiled Elkulator successfully on the pi4.
But now I have to find the roms.
I did some guess work and added some blank dummy files.
It looks like it can work, here is the proof !

This is how I did the compile :

Download the source :
https://github.com/stardot/elkulator
Extract this and go to the directory with :

cd /home/pi/Downloads/elkulator-master

Install the packages (aclocal wasn't found, so I used autotools-dev instead) :

sudo apt-get install automake liballegro4-dev zlib1g-dev libalut-dev libopenal-dev autotools-dev

compile using :

aclocal -I m4
automake -a
autoconf
./configure
make

Run Elkulator

./elkulator

(Edit : I found all the roms, which are shipped with the windows version 1.0 )
It will ask for the roms, one by one :

os
os300.rom
adfs.rom
dfs.rom
basic.rom
sndrom
plus1.rom

All the correct sha1sum's are :

pi@raspberrypi:~/Downloads/elkulator-master $ sha1sum os;sha1sum *rom* | sort -k2
2863b45dc880a7ed91ad9828795a3eb5ed0bcdd4  os
e7c7a1094d50a3579751df2007269067c8ff6812  adfs.rom
4a7393f3a45ea309f744441c16723e2ef447a281  basic.rom
eaf340b64a0a747ec479e575cc7b07cf928fd845  dfs.rom
e759e77efd8073c74a04b3907adcca4c6edd1cc8  os300.rom
2de04ab7c81414d6c9c967f965c53fc276392463  plus1.rom
2e409b92c97cda34ff25c2951e5f799125fe7e32  sndrom

Loading disks will work too, see explanation post :

2Play

@folly I will def compile and test. Much much appreciated your contrsuctive feedback and help
reverting my good friend

2Play

@folly FANTASTIC!!!
Smooth like silk! instant boot as expected.

F11 opens emu menu FYR!
I have used rom files from orig win emu folder, (needs to change from capitals to lower case 3 of them)

Folly

@2play

I tried electron with lr-mess, but I am missing 1 bios rom (os_basic.ic2), so I have to search for that.
What I found was that you talked about -flop1 but electron uses -flop.
Try that for a change, I think this is the solution.

btw.
How are you installing this ?
Are you doing this all by hand ?
You can use my script you know,

Folly

@2play

(About elkulator)
Aha nice!
So we should make a module-script of that !

2Play

@folly I ll test the flop, you probably right
I m having a custom setup so all ok. no worries

you might have also to put 1 (enable adfs) in elk.cfg

Folly

@2play

(About lr-mess / mame)
With this you will see that only flop exists :

/opt/retropie/emulators/mame/mame -listmedia electron
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
electron         cassette         (cass)     .wav  .csw  .uef  
                 floppydisk       (flop)     .ssd  .bbc  .img  .dsd  .adf  .ads  .adm  .adl  .d77  .d88  .1dd  .dfi  .hfe  .imd  .ipf  .mfi  .mfm  .td0  .cqm  .cqi  .dsk  
                 printout         (prin)     .prn  
                 cartridge1       (cart1)    .rom  .bin  
                 cartridge2       (cart2)    .rom  .bin

You should read my thread :
https://retropie.org.uk/forum/topic/29682/development-of-module-script-generator-for-lr-mess-and-mame-standalone

If you use this line it wil automatically create the electron module-script for you, without any human mistakes :
In the ext directory :

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v1-ext.sh" | bash -s electron

Or in the plain directory :

curl "https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scripts-00/generate-systems-lr-mess_mame-2v1.sh" | bash -s electron

Just install in RetroPie-Setup and you are good to go.
Bioses have to go in /home/pi/RetroPie/BIOS/mame !

Folly

@2play

(About elkulator)
I have cassette files working too and with sound !
No luck on floppy's yet

Here some tips and tricks I found :
https://github.com/damieng/BBCMicroTools/blob/master/tips-and-tricks.md