Pixel Desktop -- No Taskbar

fscii

@mitu I went to desktop compositor and it asked if I'd like it enabled and I picked no just now. Rebooted, same diagonal display in chromium. So I tried enabling it, same results. Just disabled and purging it again since it wasn't part of the issue.

Ugh how to resolve this one?

mitu

Ugh how to resolve this one?

Not quite sure, I haven't seen this issue either in a new install or in an existing (upgraded) install. Do you have any other configurations in place (screen rotation) ? What kind of display are you using - TV/Monitor, resolution ?

You can try installing the Raspberry Pi OS image (with the desktop) from raspberrypi.org and see if you have the same issues.

fscii

@mitu I was originally running Raspbian buster on this rpi4 4gb, then decided to wipe it out and do a fresh install with Retropie 4/400 image. I didn't have the issue before. It affects nothing but chromium and ironically chromium is the main point of my installing the desktop port.

I have it running on a 4k tv. The only video changes in any kind of settings to video I have done is to go into pixel desktop and hit the overscan option to eliminate the black bar around the desktop, but the diagonal chromium issue existed before and after that change.

mitu

You can install the Raspberry Pi OS desktop edition - like you had before - and then add RetroPie on top - see https://retropie.org.uk/docs/Manual-Installation/.

You can then chose to run EmulationStation instead of the desktop when you want to play.

fscii

@mitu I may try that route but before I do, I'd like to try to uninstall pixel desktop and reinstall it.

https://retropie.org.uk/docs/FAQ/#where-did-the-desktop-go

I unraveled it by doing the
sudo apt-get remove --purge
lxde xorg raspberrypi-ui-mods rpi-chromium-mods

then
sudo apt install --no-install-recommends lxde
sudo apt install xorg raspberrypi-ui-mods rpi-chromium-mods

reboot
exit emulation station
startx

same thing - argh

fscii

@mitu FYI

I pulled the usb flash drive I have been using and opened a new one and used the prebuilt image 4.7.1 just now, installed pixel desktop and same chromium behavior. After installing pixel desktop I ran the option to remove unneeded packages like pulseaudio, cups, wolfram etc. I had not done that last time and had to manually uninstall pulse.

I purposely didn't update the OS etc. as I had done so on the last image and was wondering if that was the cause.

fscii

@mitu I was afraid maybe my gpu or something was messed up but did a clean install of Raspberry OS using their imager and Chromium works fine.

In Retropie I even tried changing the gpu memory from 64 to 128, 256 and even 512 suspecting not enough memory but no effect.

Is there a way to report this to Retropie development team as it only happens in the Retropie build?

mitu

@fscii said in Pixel Desktop -- No Taskbar:

Is there a way to report this to Retropie development team as it only happens in the Retropie build?

You can consider this a report, though without being able to reproduce it, it's going to be difficult to find the cause. FWIW I've also installed the desktop from scratch on a - updated - 4.7.1 image and still can't reproduce the issue.

fscii

@mitu So far it makes only 2 of us who can reproduce it. Yikes.

Ok I imaged with raspberry pi os, and went to the link you sent and manually added in Retropie and seems to be working.

To boot into Retropie/Emulationstation I followed:
https://retropie.org.uk/docs/FAQ/#how-do-i-boot-to-the-desktop-or-kodi

Then killing pulseaudio:
sudo apt-get remove --purge pulseaudio

What I'm looking for now, is to get back to the expected behavior of launching the desktop from within emulation station. I've done this with Kodi, and need to replicate it with Pixel desktop as it will no longer appear under ports due to manual install (I suggest adding this to docs under manual install).

https://howchoo.com/kodi/how-to-install-kodi-on-retropie#optional-turn-kodi-into-a-retropie-system

I can make the changes to say desktop and within the .sh change the command to startx - is that enough?

What do I need to do to get an appropriate icon for it?

This is a really long way around just installing the retropie package but it is what it is at this point and I appreciate your help VERY much.

mitu

I can make the changes to say desktop and within the .sh change the command to startx - is that enough?

The Ports entry added by the RetroPie setup just runs

startx -- vt1 -keeptty

and this starts the desktop. Add this to roms/ports/desktop.sh and it should be fine.

What do I need to do to get an appropriate icon for it?

Find a raspberry icon, copy it in the ports folder, then edit the entry in EmulationStation (Select will allow you to edit the metadata for the any game/program entry) and add path in the image tag.

fscii

@mitu Everything is working as expected now. Thank you very much for your patience and your help!

Matt 0

I have exactly the same problem. So make that three people!
Burn Retropie 4.7.1 onto a 32GB sd card with Raspberry Pi Imager v1.6.2
Let it install on a Raspberry Pi 4 2GB
Setup the bare mininum, XBOX 360 control, and Wifi
Quit emulationstation to terminal
sudo ~/RetroPie-Setup/retropie_setup.sh
Configuration/Tools -> raspiantools -> Install Pixel Desktop
Wait to finish installing
startx
I get a desktop with no icons or taskbar, empty taskbar does flash a few times at top of screen but ends with a blank desktop
Cut power to Raspberry Pi because I see no way to close it down.
Boot up again, select Desktop on Ports menu in Retropie
Open Chromium from Taskbar
I get exactly the same issue as shown above with Chromium being slanted

Is there something I am doing wrong or missing? Any ideas what I can do? I've only had my pi for 2 days, so don't assume I know any pi or linux specific terms or menus.

I did also try using Retropie inside Twister OS, but I couldn't access the Roms folders on Retropie by connecting to the PI's IP in WIndows Explorer.

Thanks in advance for any help or advice.

whyza

@matt-0 said in Pixel Desktop -- No Taskbar:

I have exactly the same problem. So make that three people!
Burn Retropie 4.7.1 onto a 32GB sd card with Raspberry Pi Imager v1.6.2
Let it install on a Raspberry Pi 4 2GB
Setup the bare mininum, XBOX 360 control, and Wifi
Quit emulationstation to terminal
sudo ~/RetroPie-Setup/retropie_setup.sh
Configuration/Tools -> raspiantools -> Install Pixel Desktop
Wait to finish installing
startx
I get a desktop with no icons or taskbar, empty taskbar does flash a few times at top of screen but ends with a blank desktop
Cut power to Raspberry Pi because I see no way to close it down.
Boot up again, select Desktop on Ports menu in Retropie
Open Chromium from Taskbar
I get exactly the same issue as shown above with Chromium being slanted

Is there something I am doing wrong or missing? Any ideas what I can do? I've only had my pi for 2 days, so don't assume I know any pi or linux specific terms or menus.

I did also try using Retropie inside Twister OS, but I couldn't access the Roms folders on Retropie by connecting to the PI's IP in WIndows Explorer.

Thanks in advance for any help or advice.

I have the same issue with chromium on a pi400 with latest software.

my desktop is running on HDMI mode @ 1920x1280

Interestingly the problem is present when the chromium starts, as it does not start in a full window

It starts in a window roughly the size of half the screen, and the issue is present.

If I increase the window size to roughly 3/4's of the total desktop size, the problem is no longer present.

If I set the chromium window to maximum size, the problem is not present.

With the window max size, the issue is not present, unless you open the drop down menu inside chromium. This drop down menu has the problem.

So it seems to be a window size/scaling? issue.

If the window is not large enough, the problem is present.

Hopefully that helps to reproduce the issue.

whyza

@whyza

I was able to work around this chromium issue with the following commands

sudo apt-get remove rpi-chromium-mods
sudo apt-get install chromium

After this, chromium works fine.

whyza

@whyza

actually just the one command will do all the work for you

sudo apt-get install chromium

It will remove rpi-chromium-mods

whyza

@whyza

specifically the problem is with package

chromium-browser 88.0.4324.187-rpt1

work around is to install chromium meta package

sudo apt-get install chromium

which installs

chromium 90.0.4430.212-1~deb10u1

and the issue is worked around.