My last problem - the TRS80

BuZz

Although would that mean 4 more launching options for each system we have? As that makes me think upstream needs an automatic mode, which could be requested maybe

mitu

@buzz Didn't test any .cas options when the module was redone (based on @JenGun's fork), but I can take a look to see if it has any automatic media detection and maybe update the launch options or find a option to accommodate more media types.

BuZz

@mitu Sounds good. Feel free to pass anything my way also. Cheers.

JenGun

@mitu said in My last problem - the TRS80:

sdltrs-model4p-cas = "/opt/retropie/emulators/sdltrs/sdl2trs -fullscreen -nomousepointer -showled -m4p -romfile4p /home/pi/RetroPie/BIOS/level4p.rom -cas %ROM%"

The option for loading cassette images is -cassette or -cass ...

JenGun

@buzz said in My last problem - the TRS80:

As that makes me think upstream needs an automatic mode, which could be requested maybe

Automatic media detection for a few use cases? Probably not ... :-)

JimmyFromTheBay

Swapping -flop1 in EMULATORS.CFG for -cass has got me to the OS, many thanks to all. Now when I type CLOAD the tape counter appears and runs, but nothing happens when it reaches the end :(

JenGun

@jimmyfromthebay said in My last problem - the TRS80:

Now when I type CLOAD the tape counter appears and runs, but nothing happens when it reaches the end :(

Loading programs from cassette was always a pain in the "old days" because it depended on various factors: volume of the recording and quality of the tape ... and mostly only succeeded by chance ... ;-)
You can only load BASIC-programs with CLOAD, for programs in "machine-language" use SYSTEM ...
Not all CAS-files of the internet will work in the emulator ... so please provide more details ...

Folly

@jimmyfromthebay said in My last problem - the TRS80:

Swapping -flop1 in EMULATORS.CFG for -cass has got me to the OS, many thanks to all. Now when I type CLOAD the tape counter appears and runs, but nothing happens when it reaches the end :(

Don't know if it will work on TRS80 but with MSX you had to do :
cload
run

You can try that.

JimmyFromTheBay

@folly I don't get the command prompt back after the load.

JimmyFromTheBay

@jengun @jengun Okay, so I'm trying to load SeaDragon, as seen here:

That video shows the game is loaded with SYSTEM followed by S, and if I do that then the tape spins up and loads for about four minutes. But after that nothing happens and I'm just left looking at this:

I'm still getting nowhere with SDLTRS, so I'm using LR-MESS:

lr-mess-trs-80-cass = "/home/pi/RetroPie-Setup/scriptmodules/run_mess.sh /opt/retropie/emulators/retroarch/bin/retroarch /opt/retropie/libretrocores/lr-mess/mess_libretro.so /opt/retropie/configs/trs-80/retroarch.cfg trs80m3 /home/pi/RetroPie/BIOS -cass %ROM%"

I'm just hitting Enter when the "Cass?" and "Memory Size?" prompts come up. And as I said it's the CAS file from the most recent MAME softlist so hopefully it's not the file that's the problem.

JenGun

@jimmyfromthebay said in My last problem - the TRS80:

And as I said it's the CAS file from the most recent MAME softlist so hopefully it's not the file that's the problem.

No idea which CAS-file MAME is using, but this works with SDLTRS in Model I-mode ... in Model III-mode you have to type L after Cass? to select 500 Baud to load and save tapes for the Model I ...

Folly

@jengun

You can only use .wav (cas files) with TRS-80 (trs80) on mame/lr-mess.

This is the output from mame :

pi@raspberrypi:~ $ /opt/retropie/emulators/mame/mame -listmedia trs80
SYSTEM           MEDIA NAME       (brief)    IMAGE FILE EXTENSIONS SUPPORTED
---------------- --------------------------- -------------------------------
trs80            cassette         (cass)     .wav

JenGun

@folly said in My last problem - the TRS80:

You can only use .wav (cas files) with TRS-80 (trs80) on mame/lr-mess.

SDLTRS also supports WAV-files (mono) as cassette images, so that should work too ...

JimmyFromTheBay

@jengun said in My last problem - the TRS80:

No idea which CAS-file MAME is using, but this works with SDLTRS in Model I-mode ... in Model III-mode you have to type L after Cass? to select 500 Baud to load and save tapes for the Model I ...

Job done! That generated a flickering asterisk readout at top right, and got the command prompt back when the tape was finished, then I watched the video to find out you need to (bizarrely) type / to start the game.

Many thanks! Now I just need to get sound working...

Folly

@jimmyfromthebay

On the internet I see info of people using (binary files) :
CLOADM

You could try that.

JimmyFromTheBay

I see / doesn't work for EVERY game, so time to do some Googling. But other than sound that's the emulator figured out now, which is the hardest bit :D

JimmyFromTheBay

@folly said in My last problem - the TRS80:

@jimmyfromthebay

On the internet I see info of people using (binary files) :
CLOADM

You could try that.

Yeah, I'm quite experienced with the Dragon/Coco so CLOADM was the first thing I tried, but I'll keep it in mind for other filetypes :)

JenGun

@jimmyfromthebay said in My last problem - the TRS80:

Yeah, I'm quite experienced with the Dragon/Coco so CLOADM was the first thing I tried, but I'll keep it in mind for other filetypes :)

For these TRS-80 Models there is only CLOAD and SYSTEM ... no CLOADM ..

JimmyFromTheBay

@jengun Is there any significance in the fact that the asterisk readout sometimes starts with a C rather than being all asterisks? Those seem to be the games that can't be started with /.

Folly

@jimmyfromthebay

You can convert and test things on :
https://www.my-trs-80.com/cassette/

I downloaded the manual of the model 3:
If it asks for Cass ? press L or H for baudrate :
You can press enter for the memory part
then do CLOAD
then do RUN

Here you can test on the website :
Press on C-1-1 and choose Emulator (reconstructed low speed) :

Type the commands and enter :