Dreamcast/Naomi Light Gun Games with Dolphinbar on LR-Flycast Help!

andykt76

@Buzzle not sure if you've seen this on Reddit:

https://www.reddit.com/r/RetroPie/comments/g1iglz/light_gun_games_update_with_dolphinbar_pi_4/

I've not attempted this yet, still setting up my RPI4 but will be giving it a go probably next week.

Let me know if you have any luck...

Krakatoa

@Buzzle I ran into the exact same issue, every time the game restarted the bindings failed to stick. All the other settings remained though.

The only way I could fix it was to configure the controller each time, which lead to frustration so I sidelined it. If someone has a workaround I would love to know as well.

I should point out I followed the guide that @andykt76 linked

andykt76

ah yes, finally tried it. Got it working on House of the Dead 2 for Naomi. Can't get settings to stick on reboot. If anyone has solved this please chime in.

Krakatoa

@andykt76 Same as me I can't get the setting to stick after reboot either.

andykt76

OK I've sussed it out! Settings also saving when relaunching Retroarch (Flycast) - Only tested on House of the Dead 2 so far, will be trying out mappings for the other games when I get time.

Here's a step by step process of what I did, some of it may not be needed, but it's the process I followed to get it working...

Stuff needed: Mayflash dolphin-bar, Wiimote (already paired to the bar), another controller (in my case a 8bitdo SN30 Pro) already mapped in Emulation Station. A keyboard.

Right, let's get started:

Boot up your image of Emulation Station
Whilst it's booting up, make sure your Mayflash dolphin-bar is set to 1 (everywhere else seems to suggest 2, but 1 works for me)
Make sure wiimote led 1 and 2 are lit up (press home and down until they are)
On your 8bitdo, press start
Click on Configure Controllers
Press and hold a button on the wiimote (the screen will show "Keyboard")
Map your D-pad on your Wiimote to the up,down,left and right
Start - map to button 1
Select - map to button 2
Button A - map to the home button
skip the other mappings by holding down on the d-pad until you get to hotkey
Map hotkey to button 2 (same as what you mapped select to, so you can easily quit retroarch by pressing 1 and 2 on the wiimote)
Now to Options in Emulation Station
Scroll to Emulation>Retroarch and start it
using your gamepad, move right one, then down to Input>set menu toggle gamepad combo. Change this to start+select on your 8bitdo
Go to input>port 1 binds
Scroll down to lightgun
Click on Gun trigger and press wiimote trigger
Click on gun aux A, click on wiimote "A" button
Click on gun start, on wiimote click 1 button
Click on gun select, on wiimote click 2 button
Then map D-pad controls on wiimote to up/down/left/right
Scroll up and click Save Autoconfig
Come out of that menu and go left, scroll down to Configuration file
Click Save Current Configuration
Save it!
Exit retroarch
In EmulationStation load House of the Dead 2
When game starts, enter quick menu (select and start on 8bitdo)
Scroll down to controls
Go to port 1 controls
Change device type to lightgun
Click "save game remap file"
Exit Retroarch
Restart House of the Dead 2
Press button 2 on your wiimote to add coins
Press button 1 to start
Kill Zombies!

Krakatoa

@andykt76 Thanks, I'd given up trying to get this working. I'll try out tonight. Hopefully it works with Noami and Atomiswave games as well.

andykt76

@Krakatoa found that my target reciticule was sticking when firing, so tried remapping the controls again with the dolphin bar in mode 2. Works much better and the controls survive a reboot, so think I've nailed it. Now to get two guns working at the same time...

Krakatoa

@andykt76 Well I tried and now this time I can't get retropie to register the A button or the trigger on the wii mote. At first I thought it was because I had a keyboard plugged in but it wasn't that. So I'm going to give up again, its just not worth the hassle.

Got it working, thanks for the help.

andykt76

@Krakatoa If you are interested, I got other systems working too

PS1 games:

SSH into \home\RetroPie-Setup\scriptmodules\libretrocores\

Find lr-pcsx-rearmed.sh

Open it with Notepad ++

Change the section to be like this:
function sources_lr-pcsx-rearmed() {gitPullOrClone "$md_build" github.com/SindenLightgun/pcsx_rearmed.git}

Now go into EmulationStation, or SSH into your box (sudo /home/pi/RetroPie-Setup/retropie_setup.sh)
Go into Options>RPSETUP
Manage packages>Manage main packages>lr-pcsx-rearmed>Remove
Then do an update from source.
Now when you launch PS1 games, go into Quick Menu, then in Options select Pad 1 Type = guncon

When that has finished then you load lr-pcsx-rearmed as your emulator as usual. Then on the menu under options you can change Pad 1 Type to "guncon".

Tested on Elemental Gearbolt, Time Crisis I and II and it works well. However, some games are not working, Die Hard/Die Hard 2, Lethal Enforcers I and II.

For NES,
got into Retroarch Quick Menu
Change Port 1 binds device type to "Zapper"
Map Wiimote buttons same as on Dreamcast example
In Quick Menu, enable "lightgun settings"
then go to Options and change Zapper Mode to "Touchscreen"
save configs and restart

For SNES, similar to NES, but when launching a game, when the splashscreen for NES comes up, press the button on your controller to bring up the launch menu
Change the emulator for the rom to "lr-SNES9x"
When Retroarch loads, go to main menu inputs
Go to Port 2 Binds
Select SuperScope
Map trigger, alt fire like before
In Quick Menu, check lightgun mode "touchscreen"

Master System, same as NES
Port 1 - MS Light Phasrer
In Quick menu turn on show cross hair
touchscreen mode
save game mappings

Megadrive/Genesis:
Set port 2 binds to "MD Menacer"
Same settings elsewhere (i.e. touchscreen)

Still not bad progress!

adman2008

@andykt76 great tutorial thank you for doing this. I followed your steps for the PS1 lightgun setup and now I’m stuck on the guncon calibration screen in time crisis. I can’t seem to get it to move past this step, any suggestions or did I take misstep?

Thanks!