[DOSBox] official thread

jamrom2

@nemo93 No good here. Seems there is something wrong with the binary and source builds.

The Binary completes the build process, but there is nothing in the /opt/retropie/emulators/dosbox-staging/dosbox folder. This looks like a permissions issue. All others emus build fine. It shows in the Retropie package list as Installed, but it's not.

The Source build now gives me the same error as posted above that it can't finish the build. I did not have this issue before. I've since updates my OS as well as my core packages. Everything is up to date with the most recent releases.

Here is my runcommand.log with the error when I try to run Aces Over Europe...or any other game.

pc
dosbox-staging
/home/pi/RetroPie/roms/pc/aoe.conf
Not an lr-atari800 system.

Parameters:
Executing: bash /home/pi/RetroPie/roms/pc/+Start\ DOSBox-Staging.sh "/home/pi/RetroPie/roms/pc/aoe.conf"
/home/pi/RetroPie/roms/pc/+Start DOSBox-Staging.sh: line 19: /opt/retropie/emulators/dosbox-staging/dosbox: No such file or directory

Attempted to pull it down from the dosbox-staging site... but it does our version of Linux (I thought it was Ubuntu?) does not recognize the commands.

https://dosbox-staging.github.io/downloads/linux/

nemo93

@jamrom2 sorry to hear you're having issue. I'm a bit surprised to see your post given it was alright few days ago. Nevertheless let's try to sort it out.

I'm seeing some awkward output there > Not an lr-atari800 system. Wait. What? This doesn't look like a complete log. Make sure to properly copy/paste the output given by: $ cat /dev/shm/runcommand.log
there is nothing in the /opt/retropie/emulators/dosbox-staging/dosbox folder
/home/pi/RetroPie/roms/pc/+Start DOSBox-Staging.sh: line 19: /opt/retropie/emulators/dosbox-staging/dosbox: No such file or directory

The binary will install into /opt/retropie/emulators/dosbox-staging/bin/dosbox. Not sure why there's no /bin/ for you. Have you ever edited the +Start DOSBox-Staging.sh script?

=> definitely something is wrong with your setup. There's no "build" process so to speak when you opt for the pre-compiled binary version from Retropie Setup. Simply put it's a file being decompressed somewhere (/opt/retropie/emulators/dosbox-staging/bin/) on your device. So this one should work no problem on any standard Retropie image. I will require from you an exact step-by-step description please on how you got there to better understand your issue.

Please do not use binaries provided on DOSBox Staging website. These are not meant for Raspberry Pi. The supported way to get Staging on your device is via Retropie Setup.

Let's take a few steps back and just aim for something simple: to get the binary version of the current stable (0.77.1). I assume you have an up-to-date system (OS packages and Retropie Setup both updated).

Remove any Staging version you have from Retropie Setup > Manage Packages > Manage all installed Packages > Dosbox Staging > Remove.
From the same menu hit the "Install from pre-compiled binary"
Typically complete in few seconds without issue. This should generate the required config files as well as a pc directory under Retropie config (/opt/retropie/configs/) and roms (/home/pi/RetroPie/roms/). The dosbox binary will be copied over /opt/retropie/emulators/dosbox-staging/bin/.
If there's any issue preventing Retropie from creating those files/folders you should get an error message.
If there's no error then you should be ready to go.

Let me know how it goes and focus only on installing the pre-compiled binary for the time being. This has been quite heavily tested and it works out-of-the-box.

jamrom2

@nemo93

Here's how it went... no good.

The Atari800 note... just ignore it. It has something to do with my setup for atari800/5200. No idea why that's there.

The binary runs... and installs..but fails and I have no idea why because it rips by so fast I can't read it. There is definitely a message about missing something but I don't know what.

I haven't installed anything else. I'm just looking and reading as I go. I know nothing else will work.

What I don't understand is why it doesn't. I had no issue installing SDL2 and Staging before. Now I can't install binary or source for Staging at all.

I can see the folder structure as it should be, everything seems to be there. It never installs the Dosbox-Staging.sh file. I'm guessing because most likely it's not finishing the install process.

Nevemind... the dosbox-staging file is there, I had to reload ES to display the new file in my list. But still the same end result. The same error. It says:

Executing: bash /home/pi/RetroPie/roms/pc/+Start\ DOSBox-Staging.sh "/home/pi/RetroPie/roms/pc/aoe.conf"
/home/pi/RetroPie/roms/pc/+Start DOSBox-Staging.sh: line 19: /opt/retropie/emulators/dosbox-staging/dosbox: No such file or directory

mitu

@jamrom2 Do you have enough free space on your sdcard to install new packages ?
Run the installation again, then look in $HOME/RetroPie-Setup/logs and open the latest log, which should have the installation log with any errors.

jamrom2

@mitu

found it in there...

meson.build:1:0: ERROR: Meson version is 0.52.1 but project requires >= 0.54.2

I don't get this. I just did an OS update. Not sure why it says I'm at 52.1. I type in "meson -v" in my putty session and I get 0.56.1

mitu

@jamrom2 What are you installation details ? Is this a PI3/4 ? Which RetroPie version ? If you don't get a binary install, then your OS is too old.

jamrom2

@mitu
Pi3b+
4.7.11 Retropie-Setup Script

I did the OS rebuild via this from nemo93
Retropie menu > Configuration / tools (C) > raspbiantools (215) > Upgrade all packages (1)
or
from the terminal type the following: sudo apt update && sudo apt full -upgrade -y

Then I did a core package update via the Retropie menu because after doing the above, I was getting the volume mixer int error message which is now cleared.

mitu

@jamrom2 said in [DOSbox] official thread:

from the terminal type the following: sudo apt update && sudo apt full -upgrade -y

This will not upgrade your OS, if you're on Raspbian Stretch or older, you won't get upgraded to Buster.

jamrom2

@mitu I'm definitely on buster... at least that's what it shows on the RetroPie-Setup Script header.

mitu

@jamrom2 said in [DOSbox] official thread:

@mitu I'm definitely on buster... at least that's what it shows on the RetroPie-Setup Script header.

In this case you should have the binary install option - doesn't that work ?

jamrom2

@mitu I have the binary option but when I try to load it, it gives me that error at the end. Claims I don't have the correct version of meson, which makes no sense.

I also tried the source version, but it crashed as well.

Strange because I had already loaded the source version a while back without issue.

mitu

@jamrom2 said in [DOSbox] official thread:

I have the binary option but when I try to load it, it gives me that error at the end.

Please post the binary install log (from $HOME/RetroPie-Setup/logs) on pastebin.com.

jamrom2

@mitu said in [DOSbox] official thread:

@jamrom2 said in [DOSbox] official thread:

I have the binary option but when I try to load it, it gives me that error at the end.

Please post the binary install log (from $HOME/RetroPie-Setup/logs) on pastebin.com.

all set

https://pastebin.com/DvRGiKgC

mitu

@jamrom2 said in [DOSbox] official thread:

all set
https://pastebin.com/DvRGiKgC

Not quite, this is not a binary installation, it's a source installation.

For some reason though, your version of meson is not the one from the RPI repos - did you remove the RPI repos from your apt sources list ? Otherwise, apt update && apt full-upgrade should install version 0.56.1.

jamrom2

@mitu said in [DOSbox] official thread:

@jamrom2 said in [DOSbox] official thread:

all set
https://pastebin.com/DvRGiKgC

Not quite, this is not a binary installation, it's a source installation.

For some reason though, your version of meson is not the one from the RPI repos - did you remove the RPI repos from your apt sources list ? Otherwise, apt update && apt full-upgrade should install version 0.56.1.

Sorry... I took from the top of the log list thinking first last, when it's last first.

Here is the correct binary install I just did now.

https://pastebin.com/xf6KgvN6

No, I didn't remove anything manually, but that's not to say something else I've loaded did. I have a few emus that may have twisted my install a little. The Atari800 video script, MESS and Daphne/Singe installs I did I think somehow changed things a little.

I'll try what you posted and see if it works.

jamrom2

@mitu just tried

sudo apt update && apt full-upgrade

it came back with an error:

E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)
E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?

I'm logged in as pi what does it mean by root?

mitu

@jamrom2 said in [DOSbox] official thread:

Here is the correct binary install I just did now.
https://pastebin.com/xf6KgvN6

Seems to me you're using an older version of the Dosbox-Staging setup script, that you copied manually ? As @nemo93 mentioned at some point, it's now part of the RetroPie-Setup script, so you should remove the install script you copied manually and update your RetroPie-Setup script to the latest version. Afterwards, you can install the binary without issues.

I'm logged in as pi what does it mean by root?

The correct command is

sudo apt update && sudo apt full-upgrade

jamrom2

@mitu that might have happened while I was helping to test the newer versions of Staging a few months ago.

Where do I find that script to delete? Is it here?

/home/pi/RetroPie-Setup/scriptmodules/emulators

yeah... that extra "sudo" was missing. It's running the RPI repos update now.

also.. is 4.7.11 the latest RetroPie-Setup script version? If not... then I'm definitely having larger issues.

mitu

Where do I find that script to delete? Is it here?
/home/pi/RetroPie-Setup/scriptmodules/emulators

Yes.

also.. is 4.7.11 the latest RetroPie-Setup script version? If not... then I'm definitely having larger issues.

No, that's not the current RetroPie-Setup script version. If you have trouble updating to the current version, you should open a separate topic.

jamrom2

@mitu ok. I will. At this point, I think that's what's happening here. I'm not getting the current setup script.

@nemo93 I'll be back to help once I get this issue sorted. Not sure how this happened, but it seems to be the cause of all the headaches I'm having.