RetroPie forum home
    • Recent
    • Tags
    • Popular
    • Home
    • Docs
    • Register
    • Login
    Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

    Rasp Pi 4B will not setup

    Scheduled Pinned Locked Moved Help and Support
    setup errorboot issue
    27 Posts 5 Posters 3.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      azurarutlan @mitu
      last edited by

      @mitu Its already set to hdmi_safe1.

      @sleve_mcdichael So I've tried both ports. This seems to be an issue, for me anyways, tied specifically to Rasp OS Lite or the Retropie image. I can run pretty much all the other software in both ports with no issues.

      As far as upgrading the firmware I can't seem to get anything for Rasp Pi OS to run at all. I hooked up a keyboard and it still is doing the same thing. Basically bringing me up the ititial screen with QR code (that has the download link) then black screen.

      I'm so confused because I never had this issue with a pi3 when I set this up years ago for a different friend.

      1 Reply Last reply Reply Quote 0
      • mituM
        mitu Global Moderator
        last edited by

        Can you post your config.txt ? Put the text in a code block (add ``` before and after the txt).

        A 1 Reply Last reply Reply Quote 0
        • A
          azurarutlan @mitu
          last edited by mitu

          @mitu

          # For more options and information see
          # http://rpf.io/configtxt
          # Some settings may impact device functionality. See link above for details
          
          # uncomment if you get no picture on HDMI for a default "safe" mode
          #hdmi_safe=1
          
          # uncomment this if your display has a black border of unused pixels visible
          # and your display can output without overscan
          #disable_overscan=1
          
          # uncomment the following to adjust overscan. Use positive numbers if console
          # goes off screen, and negative if there is too much border
          #overscan_left=16
          #overscan_right=16
          #overscan_top=16
          #overscan_bottom=16
          
          # uncomment to force a console size. By default it will be display's size minus
          # overscan.
          #framebuffer_width=1280
          #framebuffer_height=720
          
          # uncomment if hdmi display is not detected and composite is being output
          #hdmi_force_hotplug=1
          
          # uncomment to force a specific HDMI mode (this will force VGA)
          #hdmi_group=1
          #hdmi_mode=1
          
          # uncomment to force a HDMI mode rather than DVI. This can make audio work in
          # DMT (computer monitor) modes
          #hdmi_drive=2
          
          # uncomment to increase signal to HDMI, if you have interference, blanking, or
          # no display
          #config_hdmi_boost=4
          
          # uncomment for composite PAL
          #sdtv_mode=2
          
          #uncomment to overclock the arm. 700 MHz is the default.
          #arm_freq=800
          
          # Uncomment some or all of these to enable the optional hardware interfaces
          #dtparam=i2c_arm=on
          #dtparam=i2s=on
          #dtparam=spi=on
          
          # Uncomment this to enable infrared communication.
          #dtoverlay=gpio-ir,gpio_pin=17
          #dtoverlay=gpio-ir-tx,gpio_pin=18
          
          # Additional overlays and parameters are documented /boot/overlays/README
          
          # Enable audio (loads snd_bcm2835)
          dtparam=audio=on
          
          [pi4]
          # Enable DRM VC4 V3D driver on top of the dispmanx display stack
          dtoverlay=vc4-fkms-v3d
          max_framebuffers=2
          
          [all]
          #dtoverlay=vc4-fkms-v3d
          
          1 Reply Last reply Reply Quote 0
          • mituM
            mitu Global Moderator
            last edited by

            Reformatted the text for you, you need to use ``` (backtick character) and not ' (apostrophe).

            The hdmi_safe=1 part is commented out, so it's not enabled. Did you enable it during your tests ? You need to remove the # to enable it, # comments out the option.

            A 1 Reply Last reply Reply Quote 0
            • A
              azurarutlan @mitu
              last edited by

              @mitu said in Rasp Pi 4B will not setup:

              Alright so the good news is that commenting out that worked. Bad news is that's not a permanent viable solution because it makes it look awful. What's the next step?

              mituM 1 Reply Last reply Reply Quote 0
              • mituM
                mitu Global Moderator @azurarutlan
                last edited by mitu

                @azurarutlan OK, so the issue is with your TV's resolution. If you know what resolution it supports, then you can modify config.txt and set it there, using hdmi_group and hdmi_mode.
                See this page for a list of resolutions and how they map to hdmi_group/hdmi_mode , then make the necessary modifications in config.txt and comment out the hdmi_safe=1 .

                A 1 Reply Last reply Reply Quote 0
                • A
                  azurarutlan @mitu
                  last edited by

                  @mitu So in my case with it being a 4k with 60hz I'd go group 1 mode 97?

                  mituM 1 Reply Last reply Reply Quote 0
                  • mituM
                    mitu Global Moderator @azurarutlan
                    last edited by

                    @azurarutlan No, I suggest you use 1080p, 4k is too much for gaming on the Pi4.

                    A 1 Reply Last reply Reply Quote 1
                    • A
                      azurarutlan @mitu
                      last edited by

                      @mitu Got it working! Thanks so much!!!

                      Red_TrevR 1 Reply Last reply Reply Quote 0
                      • Red_TrevR
                        Red_Trev @azurarutlan
                        last edited by

                        @azurarutlan told you ;)

                        1 Reply Last reply Reply Quote -1
                        • First post
                          Last post

                        Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

                        Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.