CEC? Issue - change volume & TV looses Pi's image...
-
Pi Model or other hardware: Raspberry Pi Zero 2 W
Power Supply used: Official (from my RP3B+)
RetroPie Version Used: 4.7.21
Built From: Pre made SD Image WEEKLY (retropie-buster-4.7.21-rpi2_3_zero2w.img.gz, dated 05-Mar-2022 - tried newer from 2x days ago too)
USB Devices connected: Wireless keyboard/mouse combo, Xbox 360 wireless adapter w/ 360 controller, TP-Link ethernet adapter
Controller used: Xbox 360 official controller
Error messages received: N/A
Verbose log (if relevant): N/AHas anybody had weird issues with the video signal dropping when you're using CEC or ARC on your receiver and TV? My image is dropping and the screen turns black for several seconds whenever I change the volume of my receiver and I just can't figure it out.
If I turn off CEC/ARC on BOTH the receiver and TV it's fine (as is hooking directly up to the TV and bypassing the receiver and HDMI switch). ALL other devices are fine in this setup, even a RPi4 - it's just the Zero 2W which has this issue.
On the Pi Zero 2 I've added all different lines to config.txt to turn off CEC functions (hdmi_ignore_cec=1, hdmi_ignore_edid_audio=1, even my normal hdmi_ignore_cec_init=1 I usually always have on, etc.), but I assume they're not totally off because CEC is still interfering and making the image drop.
Anything I can look into? Tried 4-5 HDMI modes too just in case that was it, tried different cables, etc.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.