Suggestions for ports #2

[ExarKunIv]

@sleve_mcdichael i made that one, but that was like the first one i ever made back like 1 year or more ago. it all came from a post here someone had about SW, and the compile part came from some where that is outdated most likely.

All my scripts are made just for the Pi3 or Pi4 only, as i don't have anything else to test them on, let alone time to mess with anything else.

i had a Pi3 when i started writing the scripts then i got a Pi4 half way through them all.
since the old ones still worked i just let them alone.

cleaning the ones i made are part of my TODO list as i know there are depends missing like XORG from SW and others have things they dont need

[sleve_mcdichael]

@ExarKunIv does it need xorg for something? I had it running without, though I didn't play for more than a couple minutes so there's a good chance I might have missed something.

[quicksilver]

@sleve_mcdichael the two reasons I can think of that you would want to run a game using xorg on a pi 4 running retropie are if the game doesn't scale to the full screen properly without it (some sdl1 programs have this issue with the pi 4) or the program only supports full desktop OpenGL. Looking at the shadow warrior GitHub it looks like it supports OpenGL ES and sdl2 so I wouldn't think XINIT should be needed.

[ExarKunIv]

@quicksilver @sleve_mcdichael
Yes it supports both. I believe the settings I have for it to conplile is for opengl.

Or that a what the person that posted those commands said it would do.

I would have to look for the old post and see if I did add those commands or not in my script.

But even if I have them in there. Does not mean that it is doing it or not.

I think I have the same thing with my blood port. I have it set for one but it can be used with or without xinit.

[sleve_mcdichael]

@ExarKunIv said in Suggestions for ports #2:

but it can be used with or without xinit.

If it works fine without, then we should do without, yeah? Why install/use an additional software that isn't necessary? If it doesn't serve an identifiable purpose, I say cut it.

[sleve_mcdichael]

https://github.com/Exarkuniv/RetroPie-Extra/pull/42/files

I want to remove the timidity and freepats dependencies too, but I need to do some more testing. Does anybody have MIDI bgm (not OGG) working, in any configuration?

[NIGHTKILLER05]

Hi guys !

I have a small issue with your excellent port of Hexen II Hammer of Tyirion, I followed the instructions to add the retropie extra packages (instructions found at https://github.com/Exarkuniv/RetroPie-Extra), and then installed hexen 2 I found at "Retropie-setup > Manage Packages > Manage Experimental Packages > hexen2", rebooted the system, and when I try to play the demo the game shows in a tiny window. Inside the game in "options > video mode" I can only select resolution up to 1280x1024, that makes the game fills the entire height of the screen, but only half of the screen's width:

After that, I uninstall the port and followed the instructions of this post to install Hexen 2 with something called "dispmanx" (I don't have a clue of what is that, some sort of "video trick" I think) , the instructions says that I need to "add dispmanx to the rp_module_flags="" in the hexen.sh scriptmodule that was downloaded" , I found that script at "/home/pi/RetroPie-Setup/scriptmodules/ports/hexen2.sh". I did it:

Then I reinstall the port, but the instructions says that I need to go to "settings > Retropie-Setup > Configuration / Tools > Dispmanx " an enable that "Dispmanx" for Hexen2, and I don't have that Dispmanx option in any menu.

Please help, I love Hexen game series (of 2) !!!!

[mitu]

@NIGHTKILLER05 said in Suggestions for ports #2:

Then I reinstall the port, but the instructions says that I need to go to "settings > Retropie-Setup > Configuration / Tools > Dispmanx " an enable that "Dispmanx" for Hexen2, and I don't have that Dispmanx option in any menu.

The dispmanx configuration entry has been moved to the backends config entry, from there you can choose which emulator will run with dispmanx enabled.

[NIGHTKILLER05]

Thank you man, worked like a charm !!

[Drdave79]

This post is deleted!

[Drdave79]

@sleve_mcdichael Do you have any suggestions for slowing the turning speed for Shadow Warrior? It's so damn fast. I went into the sw.cfg file and changed the JoystickAnalogScale(s) to 32767 as another post suggested, but it's still so quick, it's tough to play. Thank you.

[sleve_mcdichael]

@Drdave79 I've noticed that too but haven't experimented past that same fix yet. I'm not sure but we could try turning down the Scale value even further, and/or maybe messing with the Saturate values.

You could try adjusting them in-game and see if that gets you anywhere, or see this post regarding eduke32 (another build engine port, so may or may not be relevant) which suggests some useful values must be set manually via config.

[sleve_mcdichael]

@sleve_mcdichael said in Suggestions for ports #2:

I want to remove the timidity and freepats dependencies too, but I need to do some more testing. Does anybody have MIDI bgm (not OGG) working, in any configuration?

With help from JonoF I did get the MIDI working. It requires:

• apt install libfluidsynth-dev -- timidity and freepats were not required;

• modify sw.cfg -- FluidSynth tries to use the JACK output driver by default. We need to change this with:

[Sound Setup]
MusicParams = "audio.driver=alsa"

• ...and finally, you have to use the shareware version game data. The registered version doesn't even have MIDI in the .grp file (presumably because you're meant to just play with the CD in), only the shareware version does.

With that in mind, it may not be worth installing the extra package and futzing with the config, only to have music in the not even full version (which is free, and has the HQ music anyway.) But if you want it, that's how.

[Drdave79]

@sleve_mcdichael Thanks. I tried the one from the second post. Slightly better but still too quick. May have to mess with those numbers some more.

[sleve_mcdichael]

@Drdave79 it looks like the sliders go from 0-2 in-game which corresponds to values of 0-131072 in the config ("1" = 65536, "0.5" = 32768, etc).

These settings are working well for me...first I set controls to "modern default" and then adjust the "scale" sliders:

LeftX (strafing) 1.5 (98304)
LeftY (moving) 2 (131072)
RightX (turning) 0.25 (16384)
RightY (looking up and down) 0.25 (16384)

I didn't touch the "dead" or "saturate" values, just the "scale."

I'm not sure if the strafing and moving values are "optimal"; I didn't really have issue with them except at very low values, when movement slowed to a crawl. There's also a "run" function that can be mapped to a button that didn't seem to do anything but maybe if I set it to where the "regular" movement is less than full-speed, it might change that?

0.25 does seem good for the turning and looking axes though, for me. 0.13 was a little sluggish and 0.38 was still pretty quick. Of course you could set values in between those, if you edit the config manually.

[Drdave79]

@sleve_mcdichael Thanks for the follow-up advice. I found turning leftx down to .25 and turning worked pretty well. Overall it's running pretty smooth now!

[sleve_mcdichael]

@sleve_mcdichael said in Suggestions for ports #2:

There's also a "run" function that can be mapped to a button that didn't seem to do anything but maybe if I set it to where the "regular" movement is less than full-speed, it might change that?

I played with this some more. Values above "1" don't seem to do anything; values below "1" do reduce your top speed but "run" still isn't doing anything? I thought maybe like "0.75" would let you walk slower but still go up to full "1" speed when running, but that doesn't seem to be the case. Let us know if you make any progress here.

[Jste84]

I'm interested in trying fofix, the script seems to work but when I launch the game from the ports menu, I get a black screen and then it goes back to the ports menu.

Am I missing a step?

[sleve_mcdichael]

Edit:
actually I've just tried to sudo apt install fofix and it came back "has no installation candidate." I'm not sure this works as-is? There's a git repo: https://github.com/fofix/fofix

Edit edit:
https://fofix.readthedocs.io/en/latest/quickstart/installation.html

Says there are apt repositories for Debian 8 and 9 but not 10, so I don't think this is going to work with an aptInstall anymore.

Original post:
@Jste84 What hardware are you on? I see FoFiX is using the same glshim that was in SuperTuxKart:

https://retropie.org.uk/forum/post/273988 says it's not needed on Pi4. I haven't installed this but here's something you could try if you're on that:

In file:

/opt/retropie/configs/ports/fofix/emulators.cfg

It should look something like:

fofix = "LD_LIBRARY_PATH=/opt/retropie/supplementary/glshim LIBGL_FB=1 xinit fofix"
default = "fofix"

Edit the file and change the first line so it reads simply:

fofix = "XINIT:fofix"

Let us know if this helps.

[sleve_mcdichael]

@Jste84 I haven't tested this yet, but it should replicate the steps outlined in:

https://github.com/fofix/fofix/blob/master/doc/source/quickstart/Linux_Setup_Guide.md

...with some educated guesses in re: the md_ret_files and # symlink config dirs functions.

Make a backup, first. It wants to install pip from an external source (https://bootstrap.pypa.io/pip/2.7/get-pip.py -- seems legit, I guess? See also: https://github.com/pypa/get-pip#readme) and then use it to install some additional packages; also it wants to remove package libjack-jackd2-0 and replace with libjack0 as a dependency required to to install portaudio19-dev.

I haven't tested because I have no interest in playing this with a keyboard, and the GH controller I thought was in the back of my closet turned out to be for PlayStation (so, not USB), so I'm going to leave my system as-is. Let us know if it works for you, though, and I'll submit a PR; in any case, we should probably remove the old script, as it doesn't do anything useful (it builds glshim that isn't needed, and then it attempts to install a package that doesn't exist and configure a port that wasn't installed.)

To use, paste this code into your ~/RetroPie-Setup/ext/RetroPie-Extra/scriptmodules/ports/fofix.sh file, replacing all of its existing contents, and then reinstall fofix through RetroPie-Setup.

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="fofix"
rp_module_desc="Frets on Fire X - Guitar Hero and Rock Band clone"
rp_module_licence="GPL2 https://raw.githubusercontent.com/fofix/fofix/master/COPYING"
rp_module_repo="git https://github.com/fofix/fofix.git"
rp_module_section="exp"
rp_module_flags="noinstclean !mali !x86"

function depends_fofix() {
    getDepends python2 libglu1-mesa-dev freeglut3-dev mesa-common-dev ffmpeg pkg-config libogg-dev libportmidi-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev libsdl1.2-dev libsoundtouch-dev libswscale-dev libtheora-dev libvorbis-dev mesa-utils portaudio19-dev python-dev gettext xorg

    # install pip and packages
    local tmpdir="$(mktemp -d)"
    local url="https://bootstrap.pypa.io/pip/2.7/get-pip.py"
    local file="${url##*/}

    download "$url" "$tmpdir"
    python2 "$tmpdir/$file"
    rm -rf "$tmpdir"

    pip2 install - numpy
    pip2 install --upgrade cython
    pip2 install PyOpenGL PyOpenGL_accelerate
}

function sources_fofix() {
    gitPullOrClone
}

function build_fofix() {
    python setup.py build_ext --inplace --force
    python setup.py msgfmt
    pip install -r requirements.txt

    # ensure build completed
    md_ret_require="$md_build/build"
}

function install_fofix() {
    md_ret_files=(
        'fofix'
        'data'
        'FoFiX.py'
    )
}

function configure_fofix() {
    local script="$md_inst/$md_id.sh"
    local file="$md_inst/FoFiX.py"

    addPort "$md_id" "fofix" "FoFiX - Guitar Hero and Rock Band clone" "XINIT:$script"
    moveConfigDir "$home/.fofix" "$md_conf_root/$md_id"
    [[ "$md_mode" == "remove" ]] && return

    # chown install dir -- may not be necessary?
    #chown -R $user:$user "$md_inst"

    # symlink config dirs
    local dir
    for dir in mods shaders songs themes tutorials users; do
        moveConfigDir "$md_inst/data/$dir" "$md_conf_root/$md_id/$dir"
    done

    cat > "$script" << _EOF_
#!/bin/bash
python "$file"
_EOF_
    chmod +x "$script"
}

...if it installs but doesn't play (or if it plays but doesn't save, or crashes), try removing the # from line #chown -R $user:$user "$md_inst", and install again. This will make the install directory user-owned instead of admin, allowing files to be written to here by the normal user when the game is running.