Blackscreen on oled, works on monitor
-
hi,
I've flashed a retropie image on a m.2 drive.
when I attach it to my full-hd monitor it works perfect.
But when I attach it to my LG 65" OLED it only shows "invalid format".A previous build of the image works out of the box on both screens without a problem
I also tried several adjustments to the config.txt without luck.
When I enable hdmi_safe=1 the "invalid format" is gone but the screen stays black. On boot up it only shows (for less than a second) some default "raspbian" information without any errors.I've tried several hdmi_mode/group combination but always "invalid format"...
-
@TKoller please post your config.txt
-
@dankcushions I finally figured out what the problem was. I simply used the wrong hdmi on the Pi. For my Monitor and most other Users its the inner hdmi. For my OLED its the outer one..
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.