Tried Running Win 95 on Dosbox pure on Retropie just for Fallout 2, failed, need help

shavecat

@Fenderus
try installing Wine on your retropie
i have it and it works great
look for the topic on it here or so

Fenderus

@abj Crashed when I tried playing the fallout 2 in the port, just after installation, also after adding critter and master files, it loaded to "Please Stand By", but it crashed again, probably because im using an Rpi 3b+ without x86 support, correct me if im wrong

ExarKunIv

@Fenderus wine has nothing to do with that port.

It probably just won't work on a pi3. Sorry I never tested it on a pi3.

Fenderus

@shavecat Tried Installing Box 86 and Wine 86, but failed due to my mk arcade joystick failing to load after some kind of installation of Wine, I posted the issue: https://retropie.org.uk/forum/topic/35483/wine-broke-mk-arcade-joystick-rpi-package-for-retropie-rpi3b

shavecat

@Fenderus
think @ExarKunIv is right.

ExarKunIv

@Fenderus Now it is possible to maybe have it working. since it does install fine, and also start.

so at that point it is something with the software itself and something that the dev of it might be able to fix.

if you want you can post the issue here and see what he says.

unfortunately it will be while before i can setup my pi3 for testing (its my current Retorpie build)

Fenderus

@ExarKunIv I installed a similar build known as Falltergeist: https://github.com/falltergeist/falltergeist suggested here: https://forums.raspberrypi.com/viewtopic.php?p=2222634#p2222634

Like your suggestion, the program crashed and exited after the Please Wait screen, but I have found a clue as to what's going on because I opened it using the terminal.
Assuming this is the build that the Retropie-Extra uses, the error is:

* failed to add service - already in use?

Fenderus

@ExarKunIv Also I just found out that switching to vc4-fkms-v3d makes fallout 2 work, but cant open Retropie, and it directs itself to the console. See here: https://retropie.org.uk/forum/topic/35493/i-need-vc4-fkms-v3d-to-run-fallout-2-but-at-the-cost-of-emulation-station-not-running

retropieuser555

@Fenderus I can't remember the exact process but if I remember rightly you can rebuild emulationstation with vc4-fkms-v3d driver support. Although I think I did that with a pi zero 2w so not sure bout the pi 3b

ExarKunIv

@Fenderus said in Tried Running Win 95 on Dosbox pure on Retropie just for Fallout 2, failed, need help:

Assuming this is the build that the Retropie-Extra uses, the error is:

No I use https://github.com/alexbatalov/fallout2-ce since that one is currently being maintained

shavecat

@Fenderus
Will love do to hear that u got win95 working from retropie ! and how ;)
good luck :>

try that -
https://retropie.org.uk/forum/topic/19274/guide-stable-windows-95-on-retropie/3

Fenderus

@ExarKunIv Tried the linux 32 bit version, And ran ./fallout2-ce, but said permission denied,

Fenderus

Maybe I can make a port sh script that can add the line:

dtoverlay=vc4-fkms-v3d

to the /boot/config.txt file and then reboot the system then add some commands to the etc/rc.local to go to the Fallout 2 Directory and launch Fallout 2. Is there a way for that?

Fenderus

@retropieuser555 Did as what you said and it worked! After a few big tweaks. First I added the vc4-fkms-v3d line to the config file, then after reboot, I updated emulation station and retroarch using the Retropie Setup Script, and they booted up normally, with some lagging issues, but nothing to worry about. After that, I booted @abj solution, and it worked! I just now have to translate the joystick controls since it is a port after all. Thanks.

Fenderus

But now, it cannot save. I'm running it on the lxde desktop because I couldn't run any program that can turn a controller's joystick into a mouse in a port game