Problem with 4 -player megadrive/ genesis with lr-genesis-plus-gx

rhj501

Hi akafox,

I have the same problem i'm confused with the third step "Third, if you update the retropie script and install genesis_plus_gx from source (not binary) you will be able to see and use the "+ 4-WayPlay" option."

normally i could see "+4-WayPlay" as an option in my retroarch menu but currently can't see it. how do i install it from source?

sorry i'm a noob :(

akafox

@rhj501 Step by step..

Go to RetroPie menu
Go to rpsetup
Go to manage packages
Go to Manage main packages
move down to "lr-genesis-plus-gx"
select it (press ok)
choose update from source
Wait
Back out the the main menu
Start a 4 player megadrive/genesis game
Go to the retro arch menu (default is select+x)
Go to quick menu..then controls
Then select user device type*
press left or right on the d-pad..you should see it

*depending on what game you are playing determines the port (1 or 2) the "tap" must be on (plugged in) and also depending on the game depends on what adapter you need 4- way play or team player)

more info:
https://github.com/RetroPie/RetroPie-Setup/wiki/Genesis-Megadrive
http://www.segaretro.org/4_Way_Play
http://www.segaretro.org/Team_Player

rhj501

@akafox Thanks for the support. I have updated twice from source now but am still unable to see either " + 4 way play" within the controller options on the retro arch menu (step 14) or "Team Player". The game i'm playing is NBA Jam. When i got this working previously with another pi i had to get "+ Team player" but neither of these options are available. Not sure what else to do :(

akafox

That is strange...

You can try removing lr-genesis-plus-gx and then install it from source..

first though check to see what emulator you are using by default. The picodrive core does not have 4-way or team player ability.

Randark

I tried your steps and I was able to get a new list of available controllers in the right emulator, but none say teamplayer or 4wayplay

Any other ideas?

BuZz

No need to install from source on rpi. The binary is up to date.

akafox

That's very strange. You can try the binary..it might work.

All I know is that I had the "newest" retropie image when I setup my rasp-pi...and I still had to update the cores to get that funtion to work..but I had to use the source. That was also (according to the op) eight months ago..software changes fast.

@randark said in Problem with 4 -player megadrive/ genesis with lr-genesis-plus-gx:

I tried your steps and I was able to get a new list of available controllers in the right emulator, but none say teamplayer or 4wayplay

Any other ideas?

what options does it give you? Remember you have use left and right on the controller to select the mode. And you can not be in the "main" controller configuration screen. You need to be in the "quick menu" then controls then move the pointer using down the controller to "device type 2". Now press left or right on the controller to select the device type. The default should be "Joypad Auto" from there if you press right four times you'll get to the "3-button+4-way" if you press it six times you'll get to the "3-button+team player."

Randark

Pressing it that many times to the right worked, I couldn't read the entire option titles that were available.

akafox

Ok then you are gold... I can't help you with the reading...there might be a way to use a smaller font...but just wait a few seconds and let it scroll and read what it says. Look what I posted above...

After that has been set...go back to the "quick start" menu and then go to save game configuration file....then resume and quit the game then restart it to see if the settings stuck.

You can do a quick test by enabling the 4-player device and then backing out and choosing reset then resume..this resets the game and it will see that has been changed. But you have to save the configuration file for it to stick...unless you want to have to enable it every time you want to use it :P

sean.j.oc

As of 2024, I can confirm that @akafox's method still works.
In our case, we had two generic SNES-like controllers and a third generic PS3-like controller plugged in.
After pressing Select-X to get into the emulator menu:
The first two controllers had many controller type options.
The third controller only had retropad available.

On controller #1, we selected 3 button + 4 way tap.

Then reset the emulation from inside the menu.
Voila, 3 players.