Guide: Advanced Controller Mappings

mediamogul

I'll give Ms Pacman a go after work

Just remember that eating ghosts in a video game can be fun, but in real life it's disrespectful.

spud11

@mediamogul Hi. Thanks so much for helping me - I've eaten some ghosts! Four way restrictor mode definitely appears to work!

I looked at the code again and realised I was probably making a meal of things (pun definitely intended). I went into TAB in game, and into the Input (general) sub-menu, wrote down all of the keys and then just mapped those keys directly to the joystick buttons in xboxdrv. The code now looks like this:

sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
--silent \
--detach-kernel-driver \
--deadzone=4000 \
--deadzone-trigger 15% \
--force-feedback \
--mimic-xpad \
--trigger-as-button \
--ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void \
--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \
--device-name "Player_3_-_4-Way_Joystick_xboxdrv" \
--evdev-absmap ABS_X=x1,ABS_Y=y1 \
--four-way-restrictor \
--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start \
--ui-axismap X1=KEY_DOWN:KEY_UP,Y1=KEY_RIGHT:KEY_LEFT \
--ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5,start=KEY_1 \
&

The joystick buttons now correspond to Player 1's default keys in TAB. The ui-axismap settings reflect the fact that joystick 3 is on the side of the arcade table (ie in portrait mode, rather than landscape), so I needed to change the axes around after some trial and error.

My /etc/udev/rules.d/990xboxdrv file looks like this:

SUBSYSTEM=="input", ATTRS{name}=="Player_3_-_4-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"

Now there are only 2 other things I need to do and that is to get Player 2 up and running properly and then to transcribe the new code into runcommand-onstart.sh and list all of the relevant 4-way joystick games.

With the first thing, I've tried to change the 99-xboxdrv.rules file so that it also gives me Player 2 but the second part of the code below does not work:

SUBSYSTEM=="input", ATTRS{name}=="Player_3_-_4-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"
SUBSYSTEM=="input", ATTRS{name}=="Player_4_-_4-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="2"

Could you please assist me with this? Should there be an entirely different file for the second keyboard? I just guessed the "2" at the end. Or is it as simple as adding an "&" at the end of the line or something similar?

mediamogul

@spud11

I believe keeping it as "1" should still work. If that doesn't work, try creating a second file.

spud11

@mediamogul Thanks. That definitely worked, and I've added a couple more lines to it:

SUBSYSTEM=="input", ATTRS{name}=="Player_3_-_4-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"
SUBSYSTEM=="input", ATTRS{name}=="Player_4_-_4-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"
SUBSYSTEM=="input", ATTRS{name}=="Player_3_-_8-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"
SUBSYSTEM=="input", ATTRS{name}=="Player_4_-_8-Way_Joystick_xboxdrv", GROUP="users", MODE="0666", ENV{ID_INPUT_KEYBOARD}="1"

My runcommand.onstart.sh now looks like this:

#!/bin/sh
## Uncomment one or all of the following if you need to find some information about the emulator or roms
## Name of the emulator
#echo $1 >> /dev/shm/runcommand.log

## Name of the software used for running the emulation
#echo $2 >> /dev/shm/runcommand.log

## Name of the rom
#echo $3 >> /dev/shm/runcommand.log

##Executed command line
#echo $4 >> /dev/shm/runcommand.log


### The FUN begins
#Get ROM name striping full path
rom="${3##*/}"

### Set variables for your joypad and emulator
### Basic Configurations - Standard controller mappings 

basic="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
--silent \
--detach-kernel-driver \
--deadzone=4000 \
--deadzone-trigger 15% \
--force-feedback \
--mimic-xpad \
--trigger-as-button \
--ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void"

### Extended Configurations
### Specific emulator configurations or any other parameters you will need only for some emulators

### Joystick settings for Amiga games
amiga1="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Amiga_Joystick_Player_1_xboxdrv" \
	--evdev-absmap ABS_X=y1,ABS_Y=x1 \
	--evdev-keymap BTN_TRIGGER=x,BTN_THUMB=y,BTN_THUMB2=a,BTN_PINKIE=b,BTN_BASE3=back,BTN_BASE6=start"

amiga2="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Amiga_Joystick_Player_2_xboxdrv" \
	--evdev-absmap ABS_X=y1,ABS_Y=x1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for Arcade games that require 4-Way Restricted Joysticks
joy1restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Player_1_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy2restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Player_2_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy3restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \
	--device-name "Player_3_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy4restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \
	--device-name "Player_4_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for Arcade games that use 8-Way Unrestricted Joysticks
	joy1unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Player_1_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy2unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Player_2_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy3unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \
	--device-name "Player_3_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy4unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \
	--device-name "Player_4_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for mame-libretro Arcade games in landscape mode - joysticks emulating virtual keyboards
joy1="--ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \
	--ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5,start=KEY_1"

joy2="--ui-axismap X1=KEY_D:KEY_G,Y1=KEY_R:KEY_F \
	--ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6,start=KEY_2"

### Settings for mame-libretro Arcade games in folder 'Arcade-Vertical' in portrait/cocktail mode - joysticks emulating virtual keyboards
joy3="--ui-axismap X1=KEY_DOWN:KEY_UP,Y1=KEY_RIGHT:KEY_LEFT \
	--ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5,start=KEY_1"

joy4="--ui-axismap X1=KEY_F:KEY_R,Y1=KEY_G:KEY_D \
	--ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6,start=KEY_2"

### Kill Command
xboxkill="sudo killall xboxdrv"

### Execute the driver with the configuration you need
# $1 is the name of the emulation, not the name of the software used
# it is intellivision not jzintv
case $1 in

	mame-libretro)
	case $rom in
"amidar.zip"|"atetris.zip"|"anteater.zip"|"armorcar.zip"|"astrob.zip"|"astrof.zip"|"bagman.zip"|"ballbomb.zip"|"barrier.zip"|"blkhole.zip"|"btime.zip"|"carjmbre.zip"|"carnival.zip"|"cavelon.zip"|"checkman.zip"|"chinhero.zip"|"circusc.zip"|"ckong.zip"|"commando.zip"|"congo.zip"|"crush.zip"|"dazzler.zip"|"devilfsh.zip"|"digdug.zip"|"digdug2.zip"|"digger.zip"|"disco.zip"|"dkong.zip"|"dkong3.zip"|"dkongjr.zip"|"dommy.zip"|"dorodon.zip"|"mrdo.zip"|"puckman.zip"|"mspacman.zip")# Configuration used only for these ROMs
				$xboxkill
				joycommand="$basic $joy3restricted $joy3 & $basic $joy4restricted $joy4 &"
				eval $joycommand
			;;
			*) # Configuration for every other ROM in respect of this emulator
				$xboxkill
				joycommand="$basic $joy3unrestricted $joy3 & $basic $joy4unrestricted $joy4 &"
				eval $joycommand
			;;
		esac
	;;

	amiga)
		$xboxkill
		joycommand="$basic $amiga1 & $basic $amiga2 &"
		eval $joycommand
	;;

esac

The only thing I can't get to work is the code for the remaining joystick unrestricted games under the command *). When starting Mustache Boy (for example), the runcommand.log says that xboxdrv did not start for some reason. (I was generally hoping just to use the normal xpad driver for these games and so I initially just had sudo killall xboxdrv as the code, but that did not work, so I have set up xboxdrv 8 way joystick configurations instead which don't work either):

xboxdrv: no process found
Parameters: 
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/mame-libretro/retroarch.cfg "/home/pi/RetroPie/roms/arcade-vertical/mustache.zip" --appendconfig /dev/shm/retroarch.cfg'|'"/home/pi/RetroPie/roms/arcade-vertical/mustache.zip.cfg"

Have you encountered this problem? Thank you.

mediamogul

@spud11

the runcommand.log says that xboxdrv did not start for some reason.

That output should point to the problem. Can you post the error here?

spud11

@mediamogul Hi mediamogul. Could I ask where the output would have been saved please? The usual statements came up on screen briefly for both joysticks (ie the js/event number etc). Or would you prefer I just enter the code into the commandline? Thanks.

mediamogul

@spud11

I would first look at /dev/shm/runcommand.log, but if there's nothing there, entering it into the command line should indeed show the error.

spud11

@mediamogul Hi. I've now tested both with the script and the commandline. I think I removed a space before one of the # and that caused the problem. Everything seems to be working now (touch wood). I found the best way to test was to test both the restricted code and the unrestricted code in a shoot 'em up. It's clear as daylight that the code is working when you can't do diagonals in a shoot 'em up. Thanks for your advice on this.

Lr-mame2003 doesn't seem to have a "native" key for exiting the emulator. It relies on Retroarch. In Retroarch, I've got the "exit from emulator" set up to operate when I hold down the space key and press escape on the keyboard. As I've only got 6 buttons on Joystick 3 and, so far, I've mapped buttons 5 and 6 to "coin" (key 5) and "start" (key 1), respectively, I was wondering if it were possible to map button 5 to both keys 5 and 1 and then map button 6 to space and escape, so I can exit without the keyboard. From reading through most of the thread again, I can't see anything that really resembles what I want to do.

I've looked at your examples where you've mapped 2 buttons on the joystick (basically a modifier) to a key on the keyboard. But I want to do the opposite - press one button and it presses 2 keys.

Looking at the manual for xboxdrv, there seems to be "cycle" and "sequence" commands. The sequence one looks most likely, but I'm not sure it can be used to press a key while holding down another key.

Worst case, I suppose I could just remap the emulator keys via TAB so that if I press the 1 key it both gives me a coin and starts the game and then just map xboxdrv accordingly. I have done that before, but I don't think that's going to resolve the "exit from emulator" issue with lr-mame2003, and so I was hoping for a more elegant xboxdrv solution if there is one please.

Or perhaps I'm missing something obvious. It is getting quite late here.... Thanks.

mediamogul

@spud11

I want to do the opposite - press one button and it presses 2 keys.

Using the 'A' button as an example, you would map keys 1 and 5 to it with:

--ui-buttonmap a=KEY_1+KEY_5

I'm glad to see all this is starting to turn your way. With all your controls coexisting in various ways, your setup has been uniquely complicated.

Hubz

Hey finished my Atari ST Mapping and it works pretty good if someone else would like to try it.

atarist="--axismap -Y1=Y1,-Y2=Y2
--ui-axismap x2=REL_X:10,y2=REL_Y:10
--ui-axismap x1=KEY_LEFT:KEY_RIGHT,y1=KEY_DOWN:KEY_UP
--ui-buttonmap du=KEY_UP,dd=KEY_DOWN,dl=KEY_LEFT,dr=KEY_RIGHT,back+start=KEY_RIGHTALT+KEY_Q
--ui-buttonmap lt=BTN_LEFT,rt=BTN_RIGHT,back=KEY_F12,start=KEY_1,y=KEY_RIGHTCTRL,a=KEY_SPACE,b=KEY_ENTER,x=KEY_ESC,lb=KEY_Y,rb=KEY_N
--ui-buttonmap guide=void,tl=void,tr=void
--ui-axismap x2=void"

mediamogul

@Hubz

You've got some nice touches in there. One of my favorite options for using an external mapper like this is the ability to map 'start+select' to exit everything. The result is an almost perfect unified console feeling that normally can't be had, given the wild west of software options available throughout RetroPie. Nice job!

Hubz

Thanks! I came from tinkering for years with Hyperspin and Launchbox, and while Launchbox has a few features I miss, it's hard to beat the customization you can do with Retropie as well as the stability of the Linux environment.

dunnieboy

@mediamogul

Ok .. so i have everything working. I have a question regarding the evdev line.

I add and subtract keyboards and controllers all the time.

Using something like --evdev /dev/input/event2 does not always work because depending on the connection order the event number can change.

Is there a way to ensure the identity of a device somehow ? I have had to change my scripts to correspond with my event number manually within my scripts and would love to not have to worry about that.

Thanks

mediamogul

@dunnieboy

If a controller doesn't have a unique event name (obtained in the first section of the guide), then you should be able to specify it's path found at /dev/input/by-path/. As long as the controller is plugged into that same USB port every time, the event path should be accessible. For example, when my Logitech RumblePad is connected to the upper left USB port, it's event can always be accessed at /dev/input/by-path/platform-3f980000.usb-usb-0:1.2:1.0-event-joystick.

dunnieboy

@mediamogul right .. but as I am using wireless controllers ... by_path wont work right ?

mediamogul

@dunnieboy

It might still create a unique event path of it's own. I've never tested it with a Bluetooth controller. If the event name and path are not an option, I'm afraid event numbers are the only other recourse.

spud11

@mediamogul Thanks for this. I've adapted that and all seems to work as intended. Just now a matter of adding all 208 games that are 4 way restricted. Then I'll turn to some of the other emulators like Daphne, I think.

It most definitely is a complicated setup I've got. I really appreciate your help and patience. What a great community the Retropie community is.

#!/bin/sh
## Uncomment one or all of the following if you need to find some information about the emulator or roms
## Name of the emulator
#echo $1 >> /dev/shm/runcommand.log

## Name of the software used for running the emulation
#echo $2 >> /dev/shm/runcommand.log

## Name of the rom
#echo $3 >> /dev/shm/runcommand.log

##Executed command line
#echo $4 >> /dev/shm/runcommand.log


### Code begins
### Get ROM full path
rom="${3##*/}"

### Set variables for joysticks and emulators
### Basic Configurations - Standard controller mappings

basic="sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
--silent \
--detach-kernel-driver \
--deadzone=4000 \
--deadzone-trigger 15% \
--force-feedback \
--mimic-xpad \
--trigger-as-button \
--ui-buttonmap lb=void,rb=void,tl=void,tr=void,guide=void,lt=void,rt=void"

### Extended Configurations
### Specific emulator configurations or any other parameters you will need only for some emulators

### Player 1 and 2 joystick settings for Amiga games - only change is to the axes which have been swapped; not mapped to UAE4ARM's default keyboard settings
amiga1="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Amiga_Joystick_Player_1_xboxdrv" \
	--evdev-absmap ABS_X=y1,ABS_Y=x1 \
	--evdev-keymap BTN_TRIGGER=x,BTN_THUMB=y,BTN_THUMB2=a,BTN_PINKIE=b,BTN_BASE3=back,BTN_BASE6=start"

amiga2="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Amiga_Joystick_Player_2_xboxdrv" \
	--evdev-absmap ABS_X=y1,ABS_Y=x1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for Arcade games that require 4-Way Restricted Joysticks
joy1restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Player_1_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy2restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Player_2_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy3restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \
	--device-name "Player_3_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy4restricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \
	--device-name "Player_4_-_4-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--four-way-restrictor \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for Arcade games that use 8-Way Unrestricted Joysticks
joy1unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.3:1.0-event-joystick \
	--device-name "Player_1_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy2unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.1:1.0-event-joystick \
	--device-name "Player_2_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy3unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.2:1.0-event-joystick \
	--device-name "Player_3_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

joy4unrestricted="--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.3.4:1.0-event-joystick \
	--device-name "Player_4_-_8-Way_Joystick_xboxdrv" \
	--evdev-absmap ABS_X=x1,ABS_Y=y1 \
	--evdev-keymap BTN_TRIGGER=y,BTN_THUMB=a,BTN_THUMB2=back,BTN_PINKIE=x,BTN_TOP=b,BTN_TOP2=start"

### Settings for mame-libretro Arcade games in landscape mode - joysticks emulating virtual keyboards
### The joystick buttons have been mapped to the emulator's default keys. In lr-mame 2003 in game, press TAB to determine default keys.
### Player 1's default keys are: Buttons 1-4 (LCTRL, LALT, SPACE, LSHIFT), Start (1), Coin (5), Movement (Arrow keys)
### Player 2's default keys are: Buttons 1-4 (a, s, q, w), Start (2), Coin (6), Movement (g, d, r, f)
### For Joystick 1 (Player 1), Buttons 1 to 4 are for fire and jump and so on.  Button 5 will start Player 1; Button 6 will start Player 2; Holding Button 5 and pressing Button 6 together will exit emulator in line with Retroarch hotkey
### For Joystick 2 (Player 2), Buttons 1 to 4 are for fire and jump and so on.  Button 5 will start Player 2; Button 6 does nothing; Holding Button 5 and pressing Button 6 together will exit emulator in line with Retroarch hotkey
joy1="--ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \
	--ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC"

joy2="--ui-axismap X1=KEY_D:KEY_G,Y1=KEY_R:KEY_F \
	--ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC"

### Settings for mame-libretro Arcade games in folder 'Arcade-Vertical' in portrait/cocktail mode - joysticks emulating virtual keyboards
### The joystick buttons have been mapped to the emulator's default keys. In lr-mame 2003 in game, press TAB to determine default keys.
### Player 1's default keys are: Buttons 1-4 (LCTRL, LALT, SPACE, LSHIFT), Start (1), Coin (5), Movement (Arrow keys)
### Player 2's default keys are: Buttons 1-4 (a, s, q, w), Start (2), Coin (6), Movement (g, d, r, f)
### Because Joysticks 3 and 4 are in portrait (not landscape) mode, the axes needed to be mapped differently (eg for Joystick 3, left and right became down and up).
### For Joystick 3 (Player 1), Buttons 1 to 4 are for fire and jump and so on.  Button 5 will start Player 1; Button 6 will start Player 2; Holding Button 5 and pressing Button 6 together will exit emulator in line with Retroarch hotkey
### For Joystick 4 (Player 2), Buttons 1 to 4 are for fire and jump and so on.  Button 5 will start Player 2; Button 6 does nothing; Holding Button 5 and pressing Button 6 together will exit emulator in line with Retroarch hotkey
joy3="--ui-axismap X1=KEY_DOWN:KEY_UP,Y1=KEY_RIGHT:KEY_LEFT \
	--ui-buttonmap a=KEY_LEFTCTRL,b=KEY_LEFTALT,x=KEY_SPACE,y=KEY_LEFTSHIFT,back=KEY_5+KEY_1,start=KEY_6+KEY_2,back+start=KEY_SPACE+KEY_ESC"

joy4="--ui-axismap X1=KEY_F:KEY_R,Y1=KEY_G:KEY_D \
	--ui-buttonmap a=KEY_A,b=KEY_S,x=KEY_Q,y=KEY_W,back=KEY_6+KEY_2,start=KEY_UNKNOWN,back+start=KEY_SPACE+KEY_ESC"

### Kill xboxdrv command
xboxkill="sudo killall xboxdrv"

### Execute the driver with the configuration you need
### $1 is the name of the system emulation (eg mame-libretro), not the name of the emulator (eg not lr-mame2003), nor the name of the folder (eg not "arcade", not "mame-libretro", not "arcade-vertical"
### $1 - The system (eg: atari2600, nes, snes, megadrive, fba, etc).
### $2 - The emulator (eg: lr-stella, lr-fceumm, lr-picodrive, pifba, etc).
### $3 - The full path to the rom file.
### $4 - The full command line used to launch the emulator.
### This information can be obtained from /dev/shm/runcommand.info
case $1 in

	mame-libretro)
	case $rom in
			"afighter.zip"|"alibaba.zip"|"amidar.zip"|"armwrest.zip"|"astinvad.zip"|"atetris.zip"|"anteater.zip"|"armorcar.zip"|"astrob.zip"|"astrof.zip"|"bagman.zip"|"ballbomb.zip"|"barrier.zip"|"blkhole.zip"|"blasto.zip"|"blockade.zip"|"btime.zip"|"carjmbre.zip"|"carnival.zip"|"cavelon.zip"|"chameleo.zip"|"checkman.zip"|"chinhero.zip"|"circusc.zip"|"ckong.zip"|"commando.zip"|"congo.zip"|"crush.zip"|"dazzler.zip"|"devilfsh.zip"|"digdug.zip"|"digdug2.zip"|"digger.zip"|"disco.zip"|"dkong.zip"|"dkong3.zip"|"dkongjr.zip"|"dommy.zip"|"dorodon.zip"|"mrdo.zip"|"puckman.zip"|"mspacman.zip") # Configuration used only for these ROMs
				$xboxkill
				joycommand="$basic $joy3restricted $joy3 & $basic $joy4restricted $joy4 &"
				eval $joycommand
			;;
			*) # Configuration for every other ROM in respect of this emulator
				$xboxkill
				joycommand="$basic $joy3unrestricted $joy3 & $basic $joy4unrestricted $joy4 &"
				eval $joycommand
			;;
		esac
	;;

	amiga)
		$xboxkill
		joycommand="$basic $amiga1 & $basic $amiga2 &"
		eval $joycommand
	;;

esac

spud11

@Hubz Hi. I've added about 30 or so of the Arcade games that use 4 way restricted joysticks. Probably sometime during the next week I'll get to the remaining ones and will post them all. You'll see in my most recent message to mediamogul where I include the block of code, how far I've got.

spud11

@Hubz Hi. I've now identified 132 of the 208 4-way joystick restricted games. I'm using portrait mode, so I've only identified the ones I believe work in portrait mode. Here is the list from my runcommand-onstart.sh file:

### Arcade Games in portrait mode that use 4 way restricted joysticks - 132 of 208 identified games
RestrictedArcadeGamesPortraitMode=""alibaba.zip"|"amidar.zip"|"armwrest.zip"|"astinvad.zip"|"atetris.zip"|"anteater.zip"|"armorcar.zip"|"astrob.zip"|"astrof.zip"|"bagman.zip"|"ballbomb.zip"|"barrier.zip"|"blkhole.zip"|"blasto.zip"|"blockade.zip"|"btime.zip"|"carjmbre.zip"|"carnival.zip"|"cavelon.zip"|"chameleo.zip"|"checkman.zip"|"chinhero.zip"|"circusc.zip"|"ckong.zip"|"commando.zip"|"congo.zip"|"dazzler.zip"|"devilfsh.zip"|"digdug.zip"|"digdug2.zip"|"digger.zip"|"disco.zip"|"dkong.zip"|"dkong3.zip"|"dkongjr.zip"|"docastle.zip"|"dommy.zip"|"dorodon.zip"|"frogger.zip"|"galaga.zip"|"galaxian.zip"|"galxwars.zip"|"guzzler.zip"|"invrvnge.zip"|"invinco.zip"|"jjack.zip"|"joust2.zip"|"jrpacman.zip"|"jumpcoas.zip"|"jungler.zip"|"kchamp.zip"|"kicker.zip"|"kingball.zip"|"ladybug.zip"|"lasso.zip"|"levers.zip"|"lnc.zip"|"locomotn.zip"|"logger.zip"|"lrescue.zip"|"lupin3.zip"|"mappy.zip"|"marvins.zip"|"mikie.zip"|"mmonkey.zip"|"monsterb.zip"|"moonal2.zip"|"moonqsr.zip"|"mrdo.zip"|"mrflea.zip"|"mrjong.zip"|"mrtnt.zip"|"mspacman.zip"|"mystston.zip"|"naughtyb.zip"|"netwars.zip"|"olibochu.zip"|"ozmawars.zip"|"pacnpal.zip"|"pacplus.zip"|"pengo.zip"|"perestro.zip"|"pickin.zip"|"pignewt.zip"|"pisces.zip"|"pleiads.zip"|"pooyan.zip"|"popflame.zip"|"puckman.zip"|"pulsar.zip"|"qbert.zip"|"qbertqub.zip"|"qix.zip"|"radarscp.zip"|"retofinv.zip"|"rocnrope.zip"|"route16.zip"|"samurai.zip"|"tsamurai.zip"|"scregg.zip"|"sindbadm.zip"|"solarfox.zip"|"sonofphx.zip"|"invadpt2.zip"|"panic.zip"|"shollow.zip"|"spclaser.zip"|"sqbert.zip"|"streakng.zip"|"sbagman.zip"|"superpac.zip"|"superqix.zip"|"ssi.zip"|"swat.zip"|"tactcian.zip"|"tankbatt.zip"|"taxidrvr.zip"|"elecyoyo.zip"|"theend.zip"|"timelimt.zip"|"tomahawk.zip"|"todruaga.zip"|"tranqgun.zip"|"triplep.zip"|"tutankhm.zip"|"vanvan.zip"|"volfied.zip"|"vsgongf.zip"|"wiping.zip"|"warpwarp.zip"|"zigzag.zip"|"zzyzzyxx.zip""

Further down in my runcommand-onstart.sh file, I have the following:

case $1 in

	mame-libretro)
	case $rom in
			$RestrictedArcadeGamesPortraitMode) # Configuration used only for these ROMs
				$xboxkill
				joycommand="$basic $joy3restricted $joy3keys & $basic $joy4restricted $joy4keys &"
				eval $joycommand
			;;
			*) # Configuration for every other ROM in respect of this emulator
				$xboxkill
				joycommand="$basic $joy3unrestricted $joy3keys & $basic $joy4unrestricted $joy4keys &"
				eval $joycommand
			;;
		esac
	;;

I hope this helps you.

Hubz

Got a ti99 mapping, only problem is it seems like the emulator maps fire to EVERY button so I can't get the DPAD to map to keys as the controls don't respond unless I do --evdev-no-grab on my controller config which means the emu takes priority. Any tricks that I could do to fix that? Also after reading a tip from AtariAge i was able to get rid of the annoying cursor that displays on the emu by compiling from source if anybody wants my binary I'll be happy to share.

ti99="--ui-axismap x2=void
--ui-axismap x1=void,y1=void
--ui-buttonmap du=KEY_NUMERIC_8,dd=KEY_NUMERIC_2,dl=KEY_NUMERIC_4,dr=KEY_NUMERIC_6
--ui-buttonmap lt=void,rt=void,start+back=KEY_ESC,start=KEY_1,back=KEY_2,y=KEY_NUMERIC_0,a=KEY_SPACE,b=KEY_ENTER,x=void
--ui-buttonmap lb=void,rb=void,guide=void,tl=void,tr=void"