[Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread

HoraceAndSpider

@Stuffu said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

00". So it seems AGA games are somehow still launching on 1.3 but I don't know how to move on.

have you updated the XML file, and are you using supported LHA files that still contain the original names? e.g. PinballPrelude_v1.2_AGA_2327.lha

HoraceAndSpider

@herts101 said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

Only problem is that when I change the configuration and save it, although a config file is created for the game, this isn't automatcially loaded when I open the game next time.

Is the saved .uae file matched in name to the LHA file you are loading?

First, check that the auto-startup file has been crearted (in configs/amiga/amiberry/whdboot/save-data/Autoboots and a .uae file of equivalent name exists in the folder shown in the 'paths' panel for Configurations (default will be configs/amiga/amiberry/conf), then it should load that .uae file as part of the bootup.

herts101

@HoraceAndSpider that worked - thank you - appreciate it.

One other question - is there any way of getting rid of the "+Start Amiberry" line at the top if the EmulationStation list of games, since I can go directly into the Amiga games without it?

Thanks

LineOf7s

Given I have on occasion just wanted to indeed "Start Amiberry" without loading something in, I just renamed it to "ZZZZZ Start Amiberry" and my problem was solved. ;)

AndersHP

I cannot get Amiberry to remember my config settings.

I edited the configs for Slam Tilt with Line mode: Double and saved a uae file (that now contains "gfx_linemode=double" as intended), that got placed in my conf folder.

I copied this to my roms folder (since configuration files are set to roms/amiga), with no result. The Auto-startup file is in Autoboots folder. I tried copying the uae file to the Autoboots folder also, but I cannot get the game to start with these settings, always resets.

I also tried adding a LINE_DOUBLING=TRUE line to the hostprefs.conf file (since I generally want this setting in all games). This made no difference either.

What to do?

HoraceAndSpider

Sorry guys, I am finding it very hard to stay on top of multiple support locations, especially whilst i am very busy in RL!

To help this, I have opened the 'issues' page on the GitHub repository for the "Amiberry XML Builder"

So if you have any game where you think the XML needs something changed - either for compatibility or to improve the game play - whether that is a screen re-size, a CPU setting or a custom joypad setting, please post it on the issues page there and not on the issues page for Amiberry, or here, if you want me to pick it up easily.

There are a few rules i need in place to ensure that changes can be effectively implemented, but the details are here:

https://github.com/HoraceAndTheSpider/Amiberry-XML-Builder/wiki/The-Amiberry-XML-Builder

Thanks

youxia

@AndersHP @HoraceAndSpider Hi, I got question similar to AndersHP. I try to edit gfx settings, such as Line Double, but mostly gfx_width and height. I can change them in multiple configs and they stay changed but that does not seem to affect the display when i start the emulator and games.

The confusing thing is that there seem to be 4 possible configs:
/amiberry/conf/
-amiberry.conf
-rp-a500/1200.uae
/amiberry/whdboot/
-hostprefs.conf
/amiberry/whdboot/game-data/
specific game .whd

Plus within hostprefs.conf there are different settings which seem to relate to the same thing like: "screen_width" and "gfx_width". And then there are some settings with "amiberry." in the beginning...

This is not really an "issue" with any game - just something I need personally to get my CRT RGB hat working properly. So I'm trying to understand how configs/settings work in Amiberry. I'd appreciate any help with this.

POPEYE

I have WHD (some data with folders in zip archive). I see It in EmulationStation menu and can start it, but the game says, there is not enough memory. How can I start Amiberry from EmulationStation with custom config or choose that WHD from Amiberry menu?

moreginger

Everything I've tried so far has worked great, except Another World. I've tried AnotherWorld_v2.4_0425.lha and AnotherWorld_v2.4_Fr_2377.lha. In both cases I get a green screen straight after the code wheel screen. I'm using the Amiga Forever kickstarts.

BTW is there a way to search this thread for information, rather than the whole retropie forum?

nemo93

@dudleydes said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

@nemo93 I have added a section for Amiberry in the Docs: https://retropie.org.uk/docs/Amiga/

I have placed Amiberry at the top of the list of emulators as it's probably the most straightforward to set up and use. Let me know what you think.

@dudleydes hey apologize I never replied. Thanks for the doc it's perfect now. Hence I've edited my post above to reflect that. Cheers!

Dwarfboysim

Hi all,
Long time owner and love the Amiga. Amiberry with WHDLoad has been working great on my Pi till recently after updating. Now ALL games appear horizontal correct but vertically too far down cutting off the bottom 1/4 of the Amiga screen. Is there an over arching config to correct the vertical position and save it for all ?

Thanks,
Dwarfboysim

Chuck_B

@moreginger said in [Amiga] Amiberry + WHDLoad = Holy Grail - Amiberry's official thread:

Everything I've tried so far has worked great, except Another World. I've tried AnotherWorld_v2.4_0425.lha and AnotherWorld_v2.4_Fr_2377.lha. In both cases I get a green screen straight after the code wheel screen. I'm using the Amiga Forever kickstarts.

BTW is there a way to search this thread for information, rather than the whole retropie forum?

@moreginger Same issue. Anyone here knows how to play Another World?

nemo93

Hi Guys,

@moreginger @Chuck_B the game does work fine here at least without using the Amiga Forever kicks. I've been playing it for a while with the latest Amiberry 3.0.11 on a Pi3B+ without any issue - the lha version is the same as yours AnotherWorld_v2.4_Fr_2377. What are your other system/hardware specs?

@Dwarfboysim since the release of Amiberry 3.0.3 new parameters to control screen centering have been introduced. You could find them in the Amiberry GUI under the display setting. Then look after the Horizontal/Vertical centering boxes to the right side (next to screen height/width). The automatic centering was in place before 3.0.3 yet it has multiple side effects with other games (Banshee, Body Blows, etc) so it has been disabled by default. Perhaps you could use the whdboot/hostprefs.conf in order to set global options as described in Amiberry's wiki (scroll to the bottom) but I'm no expert on that matter. An alternative way of enabling centering is to add the following lines to the Display / Screen Setup section in an already existing .uae config file:

; 
; *** Display / Screen Setup
; 
[...]
gfx_center_horizontal=smart
gfx_center_vertical=smart

For the record let me share here the config file I've been using for that game. Copy/paste everything in a file that you'll name after AnotherWorld_v2.4_Fr_2377.uae (or whatever name your lha does have) and store it under the conf directory of Amiberry (eg. /opt/retropie/configs/amiga/amiberry/conf).

Chuck_B

@nemo93 now it says "Please insert volume Games in any drive".
I changed every reference to the game file and i also changed the following lines

kickstart_rom_file=/opt/retropie/emulators/amiberry/kickstarts/Kickstart v3.0 rev 39.106 (1992)(Commodore)(A1200)[!].rom
kickstart_rom_file_id=6C9B07D2,Kickstart v3.0 rev 39.106 (1992)(Commodore)(A1200)[!]

I'm using Amiberry v3.0.11 on a Pi3

nemo93

@Chuck_B can you share the full specs here please including OS version / retropie / etc as well as the exact name of the package/whdload you're using for that game please? I'll try to reproduce. Also have you to checked the doc from either Amiberry's wiki or Retropie's especially the section related to the "bios"?

Chuck_B

@nemo93 I'm using Retropie 4.5.1, Amiberry 3.0.11. How do I check the package/whdload?

ps: I installed the bios just like explained in the bios section

nemo93

@Chuck_B the version is usually part of the filename. In my case AnotherWorld_v2.4_Fr_2377 hence version 2.4 which is the latest to date as confirmed here. There's also a readme inside the lha archive you could check. It might be nice to keep the version within the filename as in my example. Amiberry might rely on that to automatically configure the game (thanks to the whdload_db.xml). Try to rename your game file like mine and check if this helps.

Chuck_B

@nemo93 renaming the game to AnotherWorld_v2.4_Fr_2377 gives me an AmigaDos terminal which says "CD failed returncode 20".

Anyway the exact name of my rom is AnotherWorld_v2.4_0425.lha

Dwarfboysim

@nemo93 thanks will try it. Another question if I may. Trying to click on the update XML button in the AMIBERRY GUI and keep getting told ERROR no internet connection.

Thoughts?

Dwarfboysim

BuZz

@Dwarfboysim https://github.com/midwan/amiberry/issues/540