Retroflag NESpi case + issue
-
Hi there,
I was hoping if somebody can help with a small issue I have,
I have a genuine retroflag NESPi case plus, if the power button on the front is off and I plus the micro usb power cable in it powers on, if I then press the power button so it's now pushed in and in the on position it turns off as the shutdown script see the power button as being pressed, if I press the button back to its off position it turns on.Does anybody have any suggestions?
Thanks for your help and time.
-
Hello,
To be honest I dont have a plus version I have the original without the safe shutdown. So im going to assume that you have checked all the wiring and its good to go. If your running a rpi3+ you may want to look at this: https://retropie.org.uk/forum/topic/19248/retroflag-snes-case
Chances are that even though its talking about the snes case its the same internals. In that thread (https://retropie.org.uk/forum/topic/19248/retroflag-snes-case/22) cyperghost recommeds setting the enable_uart=0 in config.txt
-
@emclinux thankyou I will give that a try tonight
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.